If you are removing a radiator from a car you can bring it to the scrap yard as is and get some good money for it, as they usually can get anywhere from $5-30 each depending on the car and type.

Hereof, What are old home radiators made of?

Similar to the other radiators in U.S. Boiler’s line, the Classic Radiator is made of durable, cast iron. Offering superb heat retention properties, cast iron radiators provide warm, soothing heating comfort and even distribution of heat in the room.

Do cast iron radiators rust?

Cast iron radiators with a polished finish

Please make sure your cloth is soft to avoid causing scratches in the surface, as this is almost guaranteed to take the shine off of your polished cast iron radiator and cause blemishes or rust on the surface.


21 Related Questions Answers Found

 

Is it worth replacing radiators?

While replacing your radiator might seem like a relatively simple procedure, it can be messy and time consuming. A good plumber should be able to replace several radiators in a day, so it’s worth spending a little extra to see the work done quickly and professionally.

What do you do with old radiators?

The best way for you to recycle your radiator is to let your mechanic remove it and recycle it, or recycle your entire car. Scrap metal dealers or car scrap yards are the most likely candidates to take your old car off your hands. Any large or medium-sized community should have at least one of these businesses.

Are cast iron radiators more expensive to run?

The simple answer is they are not more expensive to run than any other metal radiator such as ones made from aluminium or steel however they don’t work in an identical way due to the differences in materials and size, and these differences should be borne in mind before purchasing and installing them.

How do you size a cast iron radiator?

Multiply the square feet of the one section by the number of sections. Equals the cast iron radiator’s total square foot of radiation. Please note that a house heated with all cast iron radiators, the supply temperature generally does not exceed 140F or 90Btu’s per square foot output for the cast iron radiator.

How much is a scrap aluminum radiator worth?

Aluminum scrap is priced in several different categories: Aluminum radiators with copperβ€”$. 85. Aluminum radiatorsβ€”$.

How long do cast iron radiators last?

10 years

What do cast iron radiators weigh?

87 lbs

How do you move a cast iron radiator?

How does water flow through a cast iron radiator?

Because of this, many freestanding, castiron radiators have their pipe connections at the bottom of the radiator. The heated water enters the radiator and rises by convection, while the cooler water inside the radiator falls back to the boiler.

Are cast iron radiators better than steel?

They also take much longer to cool down, meaning rooms will remain heated for longer. Cast iron radiators are a more gradual option for warming a home, and steel radiators are quicker, and designed for a fast warm up and a faster cool down. In terms of emissions, heat is a big factor.

Can you sell old radiators?

Aluminum Radiator scrap can be recycled for cash at any local scrap yard near your locality. Please note that Aluminum Radiators is worth good money at the scrap yard. You just need to identify the right scrap yard that offers the best price for your scrap.

How much will a plumber charge to change a valve?

The cost of a plumber ranges from $175 to $450 for a typical job with the average cost per hour ranging from $45 to $200. This can include jobs like repairing faucets, toilets, sinks or bathtubs. Depending on the job, some plumbers charge a flat rate, or service fee of $300 on average.

Which radiator is best for heating?

The best cast iron radiators are very durable and offer excellent heat output which makes them ideal for putting anywhere. The best material for a modern radiator is aluminium. As we previously mentioned, Aluminium is better for heat transfer which makes Aluminium radiators incredibly efficient.

How heavy is a cast iron radiator?

Heavy – a single cast iron radiator may weigh anywhere from 40 to 150 pounds or more and will require a physically able person (or two) to position it in place.

How do you calculate the BTU output of a cast iron radiator?

Overall, you could pay $400 or more for this repair. Replacing a radiator hose is a quick and easy fix and will only run you $35 to $65 for the entire repair. A radiator replacement cost around $300 or more, depending on the size and type of your car. Don’t delay when you find a coolant leak.

How do you calculate the BTU output of a cast iron radiator?

I think radiators are more efficient- while it may not be immediately recognizeable in terms of money spent- radiators are more effective because once they are heated- even after the room has reached the desired temperature, the heat lasts as long as the water’s warm, compared to forced air – which you can lose once

Are modern radiators more efficient than old ones?

Modern radiators are no more efficient than old ones. The heat output depends on the temperature drop across the whole radiator and the cross sectional area of heat exchanger. Thus radiators with fins output heat more quickly than those without, but require a greater flow of hot water losing temperature to do so.

Do you lose heat with a radiator cover?

Radiator covers with the proper backing can distribute heat more efficiently than an uncovered radiator. But more heat would be lost by blocking the convection upward with a cover, particularly if it is holding books or plants; you want the heat to go to the ceiling, that is how the radiator convects heat.

Are new radiators better than old ones?

Modern radiators are more energy efficient and they tend to heat up more quickly due to the lower water content which is typically around 24% less than that in radiators manufactured prior to 2000. Fitting a new radiator can be a difficult task, especially if you aren’t familiar with plumbing.

Are cast iron radiators better than steel?

Steel radiators are preferred in smaller homes as they give off a quick, short blast of heat and cool down faster. Due to their material, cast iron radiators can produce a much higher temperature than steel ones; as the heat lasts for longer, they also don’t need to remain on for as long as their steel counterparts.

What is the cheapest way to heat a house?

Older-style free-standing radiators of cast iron consist of multiple sections that allow air to flow through and around. The cast iron stores heat, which will continue radiating out into the room for some time after the heat goes off. However, they also take longer to heat up.

Are cast iron radiators safe?

Reliable:

For the most part, radiator heaters are extremely reliable. If you installed a castiron radiator in your home today, it’s likely that it will last for years and years – and in some situations maybe even decades.

How much water does a cast iron radiator hold?

Cast iron radiators require about 14 liters of hot water per kW of heat output (1 KW or kilowatt = 3,412 BTUs) For North Americans, 1 gallon = 4.546 liters. Fan coil heaters use about 8 liters of water per KW of heat output.

How much water does a cast iron radiator hold?

To calculate the total cast iron radiator heat output required for your room (BTU/hour), simply complete the following form:
  1. Select units: feet meters.
  2. Enter your room dimensions.
  3. 3. (
  4. Select your room type:
  5. Additional features:
  6. The size of your cast iron radiator (the number of sections required) is based on:

Are old radiators efficient?

If your old radiators are quite small, they will need to be hotter to heat the room to your preferred temperature, which means the boiler is working harder. Larger radiators are more efficient as they can run at a lower temperature and still heat the room sufficiently.

Where do you put a radiator in a living room?

The traditional place to position your radiator is the coldest part of the room. Whether that’s beneath your window or against the wall. This is due to conduction, with incoming cold air causing more effective heat conduction and pushing the hot air from your radiator into the middle of the room.

How do you replace old radiators for new ones?

Replacing the Radiator
  1. Are you Removing the Radiator for Decorating or Replacing With new?
  2. Empty the Old Radiator Before Removing and Refit Valve Adapters.
  3. Remove and Refit Blanking Plugs.
  4. Hang the Radiator on Brackets and Reconnect the Valves.
  5. Drain Down Your Central Heating System.
  6. Remove the old Brackets.

How much does it cost to remove old radiators?

The removal of about 6 radiators and refinishing the floors where those radiators were, will run about $1800. 7. The total cost? It is in the neighborhood of $18,000 for the entire scope of work depending on the size of your home.

How do old cast iron radiators work?

The traditional place to position your radiator is the coldest part of the room. Whether that’s beneath your window or against the wall. This is due to conduction, with incoming cold air causing more effective heat conduction and pushing the hot air from your radiator into the middle of the room.

Where should a radiator be placed in a house?

The traditional place to position your radiator is the coldest part of the room. Whether that’s beneath your window or against the wall. This is due to conduction, with incoming cold air causing more effective heat conduction and pushing the hot air from your radiator into the middle of the room.

How efficient are radiators?

Older-style free-standing radiators of cast iron consist of multiple sections that allow air to flow through and around. The cast iron stores heat, which will continue radiating out into the room for some time after the heat goes off. However, they also take longer to heat up.