Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges. Keep in mind that the use of synthetic oil does not prevent you from performing your regularly scheduled lawn mower maintenance (i.e. check oil, change oil, etc.).

Then, What oil do I put in my riding lawn mower?

SAE 30 motor oil is commonly recommended for use in a lawn mower engine, but the safest best is to use the type of oil your lawn mower manufacturer recommends. Often 10W-30 or 10W-40, the same motor oil types that are used in vehicles, can also be used in a lawn mower.

Considering this, Is Turf Gard oil synthetic? TurfGard or a quality brand of 10w-30 synthetic oil is what you want to use.


34 Related Questions and Answers Found 💬

 

What kind of oil do I put in my John Deere lawn mower?

Recommended Oil Viscosity Grades

John Deere prefers that 10W-30 be used in all its gasoline-powered engines, including those on riding mowers. The “W” indicates that the oil was tested at low air temperatures. A 10W-30 weight engine oil is viscous even at temperatures as low as negative 4 degrees Fahrenheit.

How many quarts of oil does a John Deere d140 take?

John Deere D140 Engine
Engine Oil
Oil capacity: 2 qts 1.9 L

Does the John Deere l100 have an oil filter?

Though the filter was advertised for use in a L100, my model of L100 does NOT use an oil filter. Never seen anything like it, but its true.

How do you drain the oil on a John Deere riding lawn mower?

How to Change Oil in a John Deere Lawmower
  1. Turn on the mower and let it run for 10 minutes to warm up the engine oil.
  2. Turn off the engine.
  3. Raise the hood and locate the oil drain valve.
  4. Turn the drain cap counterclockwise with your hand to remove it.
  5. Pull the oil dipstick out of its housing by hand.
  6. Pour new engine oil into the housing.

Who makes JD oil?

Subject: RE: Who Makes JD Oil? Chevron formulates and packages John Deere Plus-50 and Northland makes the 0w-40 in the continental United States. In Europe it is made by Petro-Canada.

Does John Deere 102 have an oil filter?

The John Deere 102 was produced in 2006 and came equipped with a gear drive transmission, 42″ Mower Deck and 17hp Briggs Engine. Regular Maintenance should be performed on the 102 every 50 hours and should include Spark Plug, Air Filter, Oil Filter with 1.5qts oil and sharpen or replace mower blades.

How do you change the oil on a John Deere lawn tractor?

How to Change Oil in a John Deere Lawmower
  1. Turn on the mower and let it run for 10 minutes to warm up the engine oil.
  2. Turn off the engine.
  3. Raise the hood and locate the oil drain valve.
  4. Turn the drain cap counterclockwise with your hand to remove it.
  5. Pull the oil dipstick out of its housing by hand.
  6. Pour new engine oil into the housing.

Where is the oil filter located?

Recommended Oil Viscosity Grades

John Deere prefers that 10W-30 be used in all its gasoline-powered engines, including those on riding mowers. The “W” indicates that the oil was tested at low air temperatures. A 10W-30 weight engine oil is viscous even at temperatures as low as negative 4 degrees Fahrenheit.

How many quarts of oil does a John Deere l110?

John Deere L110 Lawn Tractor Parts 42 Mower Deck
Tune-up for John Deere L110 Lawn Tractor Parts 42 Mower Deck
Part Number Description
CHCJ7Y Spark Plugs
TY25878 Battery
2 Quarts Engine Oil Capacity

Can you use car oil in a lawn tractor?

SAE 30 motor oil is commonly recommended for use in a lawn mower engine, but the safest best is to use the type of oil your lawn mower manufacturer recommends. Often 10W-30 or 10W-40, the same motor oil types that are used in vehicles, can also be used in a lawn mower.

Is Turf Gard oil synthetic?

TurfGard or a quality brand of 10w-30 synthetic oil is what you want to use.

Does John Deere 102 have an oil filter?

The John Deere 102 was produced in 2006 and came equipped with a gear drive transmission, 42″ Mower Deck and 17hp Briggs Engine. Regular Maintenance should be performed on the 102 every 50 hours and should include Spark Plug, Air Filter, Oil Filter with 1.5qts oil and sharpen or replace mower blades.

How often should I change oil in my John Deere riding mower?

How do I reset my John Deere service reminder?

Turn the ignition key to the “Run” position, but do not start the engine. Leave the key in this position for two hours, then turn the ignition key to the “Stop” position and remove the key. The service timer will reset and come on when the next service interval is reached.

How do you level a John Deere l120 mower deck?

Park your John Deere L120 lawn mower on a flat and level surface. Press in and set the parking brake with your left foot. Move the attachment lift lever on the left side of the operator’s seat to the 2-inch height.

Is SAE 30 same as 10w 30?

Nope. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’.

Is SAE 30 same as 10w 30?

Nope. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’.

Does the John Deere l100 have an oil filter?

Though the filter was advertised for use in a L100, my model of L100 does NOT use an oil filter. Never seen anything like it, but its true.

Can I use synthetic oil in my John Deere mower?

Can you use synthetic lawn mower oil? Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges. We recommend the use of Briggs & Stratton Synthetic Oil.

Where is the oil filter located?

John Deere 4 Family 44 To 66 hp Compact Utility Tractors
John Deere 4044M Tractor $35,500 USD Read More
John Deere 4052M Tractor $31,328 USD Read More
John Deere 4066M Tractor $43,249 USD Read More
John Deere 4044R Tractor $41,995 USD Read More
John Deere 4052R Tractor $45,900 USD Read More

?Too much oil in the crankcase can damage the motor of the lawn mower. Too much oil can also cause the lawn mower to leak which can damage other parts of the lawn mower other than its motor. This is a classic case of when too much or too little can affect how an engine works.

How many quarts of oil does a John Deere d125 take?

John Deere 125 Lawn Tractor Parts 42 Mower Deck
Tune-up Parts for John Deere 125 Lawn Tractor Parts 42 Mower Deck
Part Number Description
CHCJ7Y Spark Plugs
TY23017 Battery
2 Quarts Engine Oil Capacity

How much oil does John Deere d100 take?

John Deere D100 Engine
Engine Oil
Oil capacity: 1.5 qts 1.4 L

How much oil does John Deere d100 take?

Where is the oil filter located? The oil filter’s location varies from car to car. It’s often accessible only from underneath, and may be shielded by the undertray which will need to be removed first. On some cars the filter can be accessed from above.

How much oil goes into a riding lawn mower?

Riding mowers:

Oil capacity is typically 48oz or 64 oz*. Change engine oil every 100 hours or annually, which ever comes first.

What kind of oil does a John Deere d110 take?

John Deere 32 oz. 10 W-30 Motor Oil is a 4-cycle, multi-viscosity oil engineered to stand up to high ambient temperatures. The oil is safety-tested and durable to ensure your tractor’s engine stays well-lubricated.

How much oil do I put in my riding lawn mower?

In general, the larger the engine, the more oil it requires. For example, the Cub Cadet model LT1042 has a 19 horsepower engine that needs just over 1.5 quarts of oil, while the Cub Cadet model LT1050 has a 26 HP engine that requires a little more than 2 quarts of oil to fill the crankcase.

What oil does a John Deere d130 take?

John Deere D130 Engine
Engine Detail
Briggs & Stratton 40
Starter: electric
Starter volts: 12
Oil capacity: 2 qts 1.9 L

Can you put too much oil in a mower?

John Deere 32 oz. 10 W-30 Motor Oil is a 4-cycle, multi-viscosity oil engineered to stand up to high ambient temperatures. The oil is safety-tested and durable to ensure your tractor’s engine stays well-lubricated.

How do you change the oil on a John Deere lawn tractor?

How to Change Oil in a John Deere Lawmower
  1. Turn on the mower and let it run for 10 minutes to warm up the engine oil.
  2. Turn off the engine.
  3. Raise the hood and locate the oil drain valve.
  4. Turn the drain cap counterclockwise with your hand to remove it.
  5. Pull the oil dipstick out of its housing by hand.
  6. Pour new engine oil into the housing.

How do you reset the service light on a John Deere e130?

?Too much oil in the crankcase can damage the motor of the lawn mower. Too much oil can also cause the lawn mower to leak which can damage other parts of the lawn mower other than its motor. This is a classic case of when too much or too little can affect how an engine works.