May be applied to damp but not to wet surfaces. Spray and backroll on porous & rough stucco to achieve required film build and a pin-hole free surface.

Simply so, What is Loxon XP?

Loxon XP is an exterior, high build. coating that provides excellent flexibility, durability and weather resistance. This. product will protect against wind-driven.

What is acrylic conditioner? Sherwin-Williams Loxon Conditioner is a patented acrylic formula that offers exceptional resistance to alkali, enhanced efflorescence resistance, great adhesion and fast cure time. It is ideal for new or existing masonry and assures topcoat adhesion,” said Karl Schmitt, vice president, marketing, Sherwin-Williams.


27 Related Questions Answers Found

 

Do I need to prime stucco before painting?

Brand-new stucco needs to cure for several months before it can be successfully painted. You must prime your bare stucco before you apply a finish coat of paint. The primer you use should be matched to the exterior paint you choose to use.

What is hot Stucco primer?

Primer helps prevent brush and roller marks in the coating. The coating is applied to the primer, not to the surface. The issue with “hot primers” is not so much with the product itself as with the time of application. Hot Primer applied after the plaster is cured works very well.

What is Loxon XP?

Loxon XP is an exterior, high build. coating that provides excellent flexibility, durability and weather resistance. This. product will protect against wind-driven.

Can Loxon primer be used on wood?

Exterior Latex Wood Primer: Provides a bonding coat but is not designed to block stains such as those caused by wood knots. Best used on fir, plywood and other softwoods. Loxon Concrete & Masonry Primer: Seals and adheres to concrete, brick, masonry and fiber cement siding.

How do you use Loxon acrylic conditioner?

Easily applied with a brush, roller, or spray without reduction. Loxon Conditioner bonds light chalk, and dusting concrete. Plus, since its dry to the touch in 30 minutes and ready for recoating in just 3 hours, you can finish the job the same day.

What is Loxon conditioner?

Loxon Conditioner is a 100% acrylic emulsion conditioner that will penetrate and seal interior and exterior surfaces and bond light chalk to the surface.

How do you apply elastomeric paint?

Use a latex brush or roller to apply the paint. Before you begin, get the brush or roller wet, and then squeeze out the extra water. If you have any areas that might have dust, rub some elastomeric on with a floor brush to make the elastomeric stick better (elastomeric will not stick to dust).

Do I need to prime stucco before painting?

What is masonry coating?

Masonry Coating is a polymer modified, water resistant hydraulic cement coating ideal for damp-proofing concrete and masonry walls.

Is Loxon breathable?

Loxon XP protects against rain, alkali, cracking, and efflorescence, all while remaining flexible, durable, and resistant to fading. The breathable quality of Loxon XP allows moisture to escape if necessary, whereas other elastomerics trap moisture in the substrate.

Can you spray elastomeric paint?

Elastomeric paint is a very thick elastic coating well-suited for exterior surfaces that expand and contract as temperatures fluctuate. If you plan to finish an exterior surface with elastomeric paint, you can hasten the process by using a spray rig.

How does self cleaning paint work?

Traditional paints lack the ability to repel dirt and other contaminants, which leads to the dirt and dullness that we see on practically every coated surface. This new coating, called selfcleaning paint, is hydrophobic, which means it repels water, and oleophobic, which means it repels oil.

How does self cleaning paint work?

Traditional paints lack the ability to repel dirt and other contaminants, which leads to the dirt and dullness that we see on practically every coated surface. This new coating, called selfcleaning paint, is hydrophobic, which means it repels water, and oleophobic, which means it repels oil.

What is Loxon primer?

DESCRIPTION. Loxon Concrete & Masonry Primer/ Sealer is an acrylic coating specifically engineered for interior and exterior, above-grade, masonry surfaces requiring a high performance primer. It is highly alkali and efflorescence resistant and can be applied to surfaces with a pH of 6 to 13.

Why is it important that Loxon self cleaning acrylic coating paint film is breathable?

Use the 2″ brush and ProClassic Interior Acrylic Latex Paint to paint the mortar along with any cracks and crevices of the brick. Then use the 6 ½” roller with ½” nap to paint the rest of the fireplace, ensuring that the paint is applied as evenly as possible. Tip: Always clean your brushes for future use.

Why is it important that Loxon self cleaning acrylic coating paint film is breathable?

Elastomeric Paint – The Very Best Exterior Paint
  • Elastomeric wall coatings are made with 100 percent acrylic binders and are applied at a thickness of 4 to 5 times that of traditional exterior paints.
  • Elastomeric paint forms a durable, tough film that provides a waterproof coating to almost any type of exterior yet it allows the building to ‘breathe’.

Should I use elastomeric paint on stucco?

?An elastomeric paint can also be used on stucco walls but has a much lower permeability rating and does not allow the wall to breathe as easily. An elastomeric product does have the ability to bridge small cracks, which makes it a better choice for some people with a lot of cracks.

Should I use elastomeric paint on stucco?

Elastomeric paint is usually not recommended by stucco contractors but is a product that painters tend to like more but that doesn’t mean that it is a bad product. If many people in your area have used an elastomeric product and had success, then it is probably a good choice for your home as well.

How do you use Loxon acrylic conditioner?

Easily applied with a brush, roller, or spray without reduction. Loxon Conditioner bonds light chalk, and dusting concrete. Plus, since its dry to the touch in 30 minutes and ready for recoating in just 3 hours, you can finish the job the same day.

How long does Sherwin Williams Super Paint Last?

about 5-7 years

Should I use elastomeric paint?

What is a masonry primer?

KILZ® Concrete & Masonry Bonding Primer is specially formulated to optimize the adhesion of masonry coatings. It can be used on uncoated interior/exterior surfaces such as: concrete, masonry, stucco, cinder block and any porous stone or brick. Do not use on coated surfaces.

Does Sherwin Williams sell concrete paint?

Concrete Coating All Products – SherwinWilliams.

Does Sherwin Williams sell concrete paint?

Loxon SelfCleaning Acrylic Coating is a breathable paint that reduces the potential for blistering and coating failure. Its mildew-resistant formula provides excellent weathering protection, including resistance to UV, alkalinity, efflorescence and chalking.

Which is best masonry paint?

Severe rain, snow, or excessive wind will require fine textured masonry paint for durability.
  • 5 Leyland Granocryl Smooth Masonry Paint.
  • 6 HQC Masonry Paint.
  • 7 Leyland Truguard Pliolite Masonry Paint.
  • 8 Sandtex Ultra Smooth Masonry Paint.
  • 9 Dulux Trade Weathershield Masonry Paint.
  • 10 Drylok Latex Masonry Paint.

Is elastomeric paint breathable?

A “breathablecoating is generally considered one that is 10 perms or greater, and typical elastomeric coatings may range from 8-12 perms or more. ‘ Water vapor that can no longer be breathed out of the wall gathers behind the coating and condenses into water.

What is acrylic conditioner?

Sherwin-Williams Loxon Conditioner is a patented acrylic formula that offers exceptional resistance to alkali, enhanced efflorescence resistance, great adhesion and fast cure time. It is ideal for new or existing masonry and assures topcoat adhesion,” said Karl Schmitt, vice president, marketing, Sherwin-Williams.

Why is it important that Loxon self cleaning acrylic coating paint film is breathable?

Loxon SelfCleaning Acrylic Coating is a breathable paint that reduces the potential for blistering and coating failure. Its mildew-resistant formula provides excellent weathering protection, including resistance to UV, alkalinity, efflorescence and chalking.

A “breathablecoating is generally considered one that is 10 perms or greater, and typical elastomeric coatings may range from 8-12 perms or more. ‘ Water vapor that can no longer be breathed out of the wall gathers behind the coating and condenses into water.

How long will elastomeric paint last?

10 years

How much does elastomeric paint cost?