The answer: There is no legislation that states that electrical cabinets need to be restricted from non-qualified workers/employees, i.e. locked to restrict access.

Simply so, Can an electric meter be inside?

We can normally move your electricity meter up to 15cm along its backboard. This is the wooden board the meter is mounted on. A meter move like this is usually done for free. The meter is inside your property.

What is an NMB key? The NMB key is a key used by gas workers, electricians, waterboard etc. It is used for the purpose of gaining access to a property in order to read or service gas, electricity, water meters and so on.

23 Related Questions Answers Found


Can I get rid of my smart meter?

There is no obligation to have a smart meter installed and it is up to the consumer whether they agree to have one or not. It said a consumer can ask for a smart meter to be removed at any time, but a supplier could levy a charge for the cost of the switch – although it admitted it hadn’t heard of this happening.

Was lock Western power?

If you would like to provide access but also want to maintain security, you can install a Western Australian Services (WAS) lock. WAS locks are padlocks that only ourselves, Western Power, Synergy and Alinta Gas have keys for. They are available from licensed locksmiths and security suppliers.

What is a meter lock?

A gas meter lock is a specialized lock that is placed on a gas meter to close off the flow of gas completely. These locks are costly, as are the specialized keys that unlock them. The key pulls the cylinder up, compresses the spring, and allows you to push in the ball bearings.

Will the power company know if I pull my meter?

It takes special training and protective equipment to safely pull a meter. And if by the term “smart meter” you mean that it is monitored and read remotely then yes, the power company will know within minutes of you pulling it. Yes they will know if you remove the meter and tamper with the lock.

Can electricity be cut off remotely?

ELI5: How can the power company remotely shut off power to a single house? You can pivot the arm to break the electrical connection. So the answer is, they can‘t really do it remotely. They have to send a truck to the power pole near your house, and have a lineman yank the disconnect switch.

How do I reset my prepaid meter?

Turn on only the appliances that you need. 1) Press the i key followed by 008. The meter displays the number of days into the current 30-day period followed by the consumption in kWh. Press the i key twice in quick succession to reset the day and consumption counters to zero.

How do I remove my electric meter?

How to Remove an Electric Meter
  1. Contact the power utility company to set an appointment.
  2. Prepare the home for the removal of the electric power.
  3. Disconnect the high-voltage feed wire to the main transformer.
  4. Cut the thin security tag wire that holds the meter base closed.
  5. Open the meter base box and grasp the meter with two hands.

How do you pick a barrel lock?

Can you go to jail for stealing water?

Along with those penalties, water theft can lead to criminal charges. Misdemeanor grand theft is punishable by up to 364 days in county jail, while felony grand theft carries a sentence of up to three years in jail and a fine of up to $10,000.

Can I turn my own water back on?

In most cases, the water company can turn the water back on for you. If you want to turn the water on manually, however, you can either switch on the valves next to your appliances or use the main water shut-off valve.

What does a black tag on electric meter mean?

The black tag on your house’s electricity meter is a security device that lets your power company know whether the meter has been tampered with. The tag is on the side or bottom of the meter’s glass cover or metal panel. You are not to cut, remove or modify the tag in any fashion.

How do I turn off my main power supply?

To shut off the electrical power to your entire house, locate the main electrical panel (it pays to know where this is before you need it!) and flip the main circuit breakers at the top (usually a pair) to OFF. To shut off the power to individual rooms or circuits, shut off the branch circuit breakers.

What happens if you cut the lock off your gas meter?

The danger is being sloppy when you cut the lock off and cutting the gas pipe as well, causing an explosion. Even if you cut the lock off, and turn the valve to the ON position, the gas will still be blocked by a solid washer (disc) placed in the inlet or outlet sleeve coupling located next to the meter body.

How do I turn my water back on after I turn it off?

How to Turn Water Back on After Getting Air Out of the Pipes
  1. Allow all faucets and spigots inside and outside the home to remain open from one-quarter to one-third of the way.
  2. Locate the main water valve.
  3. Turn the main water valve on.
  4. Open all faucets and spigots another one-quarter to one-third of the way.
  5. Turn all the faucets off in the house.

How does a barrel lock work?

As a security measure, the barrel is able to turn freely in the housing. The freeness to spin makes the lock more resistant to picking. The key for the lock will either be a screw type key that turns into the lock or plunger type key that is propelled (usually with a handle) into the keyway.

Can you get in trouble for turning water back on?

You don’t get in any trouble for turning the water back on, but they’ll still charge you for a reconnect fee.

How do you know if someone is stealing electricity?

Check the meter regularly – if it’s running backwards, has loose wires, or if you can’t see the numbers, then the chances are that someone you know is stealing electricity.

Do electrical panel doors have to be closed?

Electrical panels must be kept free of obstructions with at least 3 feet of clearance provided in front of the panel. Panel doors must be able to open a minimum of 90ΒΊ and doors must be kept closed unless work is being done to the panel. Circuit breaker blanks must be installed in open panel slots.

Do electrical panels require doors?

3 Answers. National Electrical code does not require a door to cover breaker handles. It does require a cover that prevents access to electrified parts, which must have all openings closed. A panel without a door is not a violation, but a panel without a cover is.

Why is breaker box outside?

Typically the circuit breakers are inside to keep them away from moisture. The meter and main disconnect are outside. There are times when the main box is placed outside. Most common reason in my experiance is when have a very old house rewired.

Why is breaker box outside?

What to do when power is shut off?

What to Do When the Power Goes Out
  1. Be Prepared for an Outage.
  2. Assemble a Kit in Advance.
  3. Investigate Why the Power is Out.
  4. Stay in Communication During an Outage.
  5. Turn Off Your Appliances.
  6. Stay as Comfortable as Possible.
  7. Keep Your Family Members Safe.
  8. Practice Generator Safety.

How long does it take to get power turned back on?

If I had paid my payment after the utility has cut off my service, how long will it take for me to get my service turned back on? top. They will turn your service back on within eight hours (gas and electric) or twenty-four hours (water) after you pay your bill.