Zinsser’s primers (BIN, 123 and Cover Stain) all say in their technical docs that they can be painted over with any water-based or solvent-based topcoat. But they never actually use the word “undercoat”; they only describe themselves as primers.

Hereof, What is Zinsser BIN used for?

Zinsser BIN is a white-pigmented, shellac-based primer that seals surfaces to keep sap and tannin from bleeding into paint when painting wood. BIN is what I use the most for priming kitchen cabinets and tough stains on drywall.

How many coats of bin primer do I need? Very porous surfaces may require two coats which may reduce the square foot coverage of the product. B-I-N is an excellent interior stain killing primer. One coat effectively blocks stains, including water, nicotine, ink, crayon, marker, rust and smoke stains so they will not bleed into the topcoat.


24 Related Questions Answers Found

 

Is Zinsser primer good?

Zinsser Bulls Eye 1-2-3 2 gal. Water Based White Primer and Sealer provides excellent adhesion to glossy surfaces without sanding. It’s great for interior and exterior surfaces. Outstanding low VOC and low odor formula is designed to resist blistering, peeling and mold and mildew growth.

How long does Zinsser BIN take to cure?

Dry Time– In most cases B-I-N® will dry to the touch in 20 minutes and can be recoated in 45 minutes. The dry primer film develops full adhesion after it cures in 1 to 3 days. Lower temperatures, higher humidity and the addition of tint will prolong dry and cure time. Coverage– Approx.

Can you paint emulsion over Zinsser BIN?

Yes you can paint over that – just make sure it is properly dry. Also if you are doing two coats over it make sure you also leave a good amount of drying time between. BE123 seems to slow the drying process a little and you will find the paint dragging if you try and second coat to soon.

How long does Zinsser BIN take to dry?

Dry Time– In most cases B-I-N® will dry to the touch in 20 minutes and can be recoated in 45 minutes. The dry primer film develops full adhesion after it cures in 1 to 3 days. Lower temperatures, higher humidity and the addition of tint will prolong dry and cure time. Coverage– Approx.

How do you paint over old shellac?

Apply deglosser liberally to a lint-free cloth. Rub the deglosser onto the shellac. Some deglossers use a single-step cleaning process, in which you rub the deglosser on and then immediately wipe it off again with a clean section of cloth, while others need time to work between application and removal.

Is Zinsser 123 good for new drywall?

Bulls Eye 1-2-3® is great for new and previously painted drywall, plaster, wood, metal, vinyl, PVC, fibreglass, masonry – any interior surface. And it seals off tannin in cedar siding do it won’ t bleed through your paint.

Does Zinsser Cover rust?

Zinsser Cover Stain Stops stains from graffiti, smoke, grease and crayon, seals water, smoke & nicotine stains. Also seals porous surfaces such as plaster board, masonry and wood, will hide rust and mildew.

What Colour is Zinsser BIN?

What is Zinsser used for?

Zinsser Cover Stain® makes light work of unwanted graffiti – it primes and seals the affected substrate in one, preventing stains from resurfacing. Good preparation is the key to success when painting weathered and chalky exterior walls.

How many coats of primer do I need?

Generally, one to two coats of primer will suffice for painting interior walls, but how many you’ll need depends on the wall material, the paint color, and the type of primer used. Keep reading for the magic number of primer coats for all types of interior painting projects.

Is Zinsser 123 waterproof?

Zinsser Bulls Eye 1-2-3 2 gal. Water Based White Primer and Sealer provides excellent adhesion to glossy surfaces without sanding. It’s great for interior and exterior surfaces. Outstanding low VOC and low odor formula is designed to resist blistering, peeling and mold and mildew growth.

Does it matter what color primer you use?

Some say the primer color does not matter, and it doesn’t if you put enough coats over it, but that can get costly. Primer colors come in black, red, gray, and white. Black primer is used when you want to paint your car black or a very dark color. This means you don’t have to use as many coats of paint.

How long does Zinsser 123 take to dry?

30 minutes

Does Zinsser Cover rust?

Zinsser Cover Stain Stops stains from graffiti, smoke, grease and crayon, seals water, smoke & nicotine stains. Also seals porous surfaces such as plaster board, masonry and wood, will hide rust and mildew.

Is Zinsser oil based?

Product Overview

Zinsser Cover Stain 1 Gal. Oil Based White Interior/Exterior Primer and Sealer sticks to any surface without sanding and can be used under and over oil and latex topcoats. It features an oilbased formula that seals stains from water, smoke, fire, nicotine and tannin bleed.

Is Zinsser oil based?

How to Paint Stained Wood Trim White
  1. Go over the wood with 150-grit sandpaper. Sanding removes surface imperfections, along with the top layer of gloss from a previously finished wood surface.
  2. Clean off the sandpaper dust with a damp rag.
  3. Apply stain-blocking primer to the wood trim, using a paintbrush.

Does Zinsser 123 kill mold?

Zinsser Mold Killing Primer is a water-based fungicidal protective coating that can be used to paint over and kill all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms.

Which is better Kilz or Zinsser?

When applied to two different walls in the same space, two coats each, Original Kilz Primer allowed more bleed-through, while Zinsser provided better coverage. However, Kilz Premium is a high-hiding formula, with a whiter, thicker consistency for superb opacity.

What is shellac based primer?

Shellac Primer

Shellac has been used for centuries to seal wood and other surfaces. Good for interior paint jobs, shellacbased primers are possibly the best stain-blocking primers, working well on severe water and smoke damage to walls and surfaces — they even seal in smells from smoke damage.

Is Peel stop a primer?

Zinsser Peel Stop is a clear, flexible and binding primer, designed for surfaces that are peeling, chalking, or cracking. Applied over cracked or crazed surfaces, Peel Stop acts as a flexible bridging primer to seal crazing and prevent the finish coat from cracking, providing a sound surface for primer and paint.

What is best stain blocking primer?

Overview. With a well-established reputation spanning over four decades, Kilz paint has been in the business of covering up rust stains, mold, mildew, and unfortunate color choices in millions of homes. Kilz paint is a water-based latex primer and sealer.

How soon can I paint over primer?

Most latex primers dry to the touch within 30 minutes to 1 hour. But do not paint the wall until the primer dries thoroughly, which can take up to 3 hours. High humidity and cool temperatures prolongs drying times.

Does it matter what color primer you use?

Some say the primer color does not matter, and it doesn’t if you put enough coats over it, but that can get costly. Primer colors come in black, red, gray, and white. Black primer is used when you want to paint your car black or a very dark color. This means you don’t have to use as many coats of paint.

Does it matter what color primer you use?

Zinsser Cover Stain 1 Gal. Oil Based White Interior/Exterior Primer and Sealer sticks to any surface without sanding and can be used under and over oil and latex topcoats. It features an oilbased formula that seals stains from water, smoke, fire, nicotine and tannin bleed.

What is shellac based primer?

Shellac Primer

Shellac has been used for centuries to seal wood and other surfaces. Good for interior paint jobs, shellacbased primers are possibly the best stain-blocking primers, working well on severe water and smoke damage to walls and surfaces — they even seal in smells from smoke damage.

Is Bullseye 123 a bonding primer?

Zinsser Bulls Eye 1-2-3 Primer is a whole-house primer-sealer. Premium stain blocker and bond coat is designed for priming all surfaces, inside or out. Bulls Eye 1-2-3 provides excellent adhesion and works with any oil paint or latex paint.

How soon can I paint over primer?

In most cases, latex primers don’t take more than an hour to dry out. However, you should wait three to four hours before applying a layer of paint. On the other hand, an oil-based primer will need a longer time to dry out. You should give it 24 hours to make sure that it’s completely ready for another coat.

Is Peel stop a primer?

Zinsser Peel Stop is a clear, flexible and binding primer, designed for surfaces that are peeling, chalking, or cracking. Applied over cracked or crazed surfaces, Peel Stop acts as a flexible bridging primer to seal crazing and prevent the finish coat from cracking, providing a sound surface for primer and paint.

What is kilz good for?

Zinsser Bulls Eye 1-2-3 Primer is a whole-house primer-sealer. Premium stain blocker and bond coat is designed for priming all surfaces, inside or out. Bulls Eye 1-2-3 provides excellent adhesion and works with any oil paint or latex paint.

Is kilz original a bonding primer?

KILZ® Adhesion Interior & Exterior Bonding Primer is a water-base, modified-acrylic primer specifically formulated to bond to a variety of ‘tough-to-paint’ surfaces. Its advanced chemistry provides a sound anchor for topcoats while reducing or potentially eliminating the need for sanding dense, glossy surfaces.

How long should Zinsser primer dry before painting?

Overview. With a well-established reputation spanning over four decades, Kilz paint has been in the business of covering up rust stains, mold, mildew, and unfortunate color choices in millions of homes. Kilz paint is a water-based latex primer and sealer.