Paint on membranes can also be used, such as RedGuard or AquaDefense. This a is a recent job I completed illustrating Kerdi over Hardibacker. I called USG,the maker of Durock cement board Next Gen, and they advised using no vapor barrier so that the wall cavity can breath and allow any moisture to evaporate.

Then, What is dent shield?

Ding ShieldDent Protection and More

Being protected against everyday occurrences—such as run-away shopping carts, flying rocks or vertical curbs waiting to scuff your wheels—is one of the best ways to invest in the appearance of your vehicle and keep it looking as good as new and help retain its value.

Considering this, Can you use Densglass in a shower? The densglass is used in place of normal gypsum sheathing and is installed against the exterior framing prior to the tub / shower installation. This densglass sheathing will withstand the elements, and will not promote any deterioration or mold, mildew buildup.


26 Related Questions and Answers Found 💬

 

What is DensShield made of?

DensShield Tile Backer is composed of a water-resistant treated core that is covered front and back with fiberglass mats. The mats are permanently integrated with the core during manufacturing, preventing delamination problems that can occur with paper- faced greenboard.

What is the best cement board for shower walls?

Tile Backer Board Breakdown
  • Foam boards are lightweight, easy to cut, and a completely waterproof. Pictured: Wedi Board tile backer board.
  • Schluter approves Kerdi over drywall.
  • Hardibacker is the best known fiber cement board.
  • Cement board has improved over the years and is easier to work with.

What is DensShield drywall?

DensShield is an ideal tile backer board for high moisture areas because. it has a built-in moisture barrier that stops moisture at the surface. This special coating. helps protect the tile installation and wall cavity from moisture intrusion.

What is DensShield tile backer?

Engineered to prevent damage to the sub-floor or wall cavity if moisture seeps through grouted tile, DensShield® Tile Backer is the first backer board with a built-in moisture barrier. Easier to handle than cement board, DensShield Tile Backer cuts and installs like drywall without special tools or fasteners.

What is DensShield made of?

DensShield Tile Backer is composed of a water-resistant treated core that is covered front and back with fiberglass mats. The mats are permanently integrated with the core during manufacturing, preventing delamination problems that can occur with paper- faced greenboard.

What is GoBoard?

GoBoard is the innovative tile backer board by Johns Manville that is ultra-lightweight, waterproof, durable, easy to cut, and install. Shower installations are fast because waterproofing is built-in, which eliminates extra steps since only board joints and fastener locations need to be sealed.

Does Home Depot carry DensShield?

DensShield Gypsum Backer Board 1/2 in. x 2.7 ft. x 5 ft. Tile Backer-008590 – The Home Depot.

What is the best material to use for shower walls?

Push the mortar through the mesh tape and into the 1/8-inch space between the backer board and the drywall. Run the drywall knife over the mortar to create a smooth finish and remove any excess material.

Can you use 1/4 Hardibacker walls?

When butting HARDIBACKER ® sheets to 1/2″ drywall, tack 1/4” thick furring strips to each stud. In wet areas, install a moisture barrier (such as 15 lb. roofing felt) between studs and HARDIBACKER ® sheets. Install sheets 1/4” above floor, tub or shower pan.

Can DensShield be used outside?

DensShield Tile Backer should not be used in commercial saunas, steam rooms, around fireplaces or areas where prolonged exposure to heat exceeds 125° F (52° C). DensShield Tile Backer panels should not be used as a shower pan base. DensShield Tile Backer should not be used for exterior installations.

Is DensGlass waterproof?

It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.

Does DensShield need Redgard?

They also confirmed that it is okay to apply a water-proofing membrane such as Redgard to the face of the Densshield (nothing is to go on the back).

What is GoBoard?

Does Home Depot carry DensShield?

DensShield Gypsum Backer Board 1/2 in. x 2.7 ft. x 5 ft. Tile Backer-008590 – The Home Depot.

Can I paint DensShield?

The nontiled areas can be primed and painted with the same finish used on the other walls in the room as long as the primer and paint are suitable for high-moisture areas.

How do you finish backer board?

Push the mortar through the mesh tape and into the 1/8-inch space between the backer board and the drywall. Run the drywall knife over the mortar to create a smooth finish and remove any excess material.

Which side of cement backer board faces out?

Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.

Does cement board wick water?

If you use cement backer board, you have to install a separate moisture barrier between the board and any wood it’s attached to. Since the concrete can absorb and wick moisture, the barrier prevents wood rot if the backer board gets saturated with water.

What is the best backer board for a shower?

Tile Backer Board Breakdown
  • Foam boards are lightweight, easy to cut, and a completely waterproof. Pictured: Wedi Board tile backer board.
  • Schluter approves Kerdi over drywall.
  • Hardibacker is the best known fiber cement board.
  • Cement board has improved over the years and is easier to work with.

What is the best material to use for shower walls?

The phosphate coating, which is black in appearance, is preferred, as it is the more rustresistant. However, this does not sanction use in wet or exterior situations. Zinc-coated screws, when they begin to rust, will damage any plaster and wall finish applied over them.

Can you plaster over DensGlass?

HardieBacker® cement board is a unique, cement based water resistant tile backerboard that can be used on walls, floors and worktops. The products meet the European standard for fibre cement – EN 12467 and its reaction to fire, in accordance with EN 13501-1, is A1,S1-d0.

Can DensShield be painted?

The nontiled areas can be primed and painted with the same finish used on the other walls in the room as long as the primer and paint are suitable for high-moisture areas.

What is the best backer for tile?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

What is the best backer for tile?

What is the best material to use for shower walls?
  1. Glass Tile. Glass tiles are exactly what they sound like, they are translucent tiles that give an extra shine to your bathroom.
  2. Stone Tile. Stone tile is tiling that looks like a natural marbling.
  3. Ceramic.
  4. Acrylic.

What is gypsum backer board?

Water-resistant gypsum backing board (see ASTM C 1396, Standard Specification for Gypsum Board) is designed to be used as a base for the appli- cation of ceramic or plastic wall tile or plastic fin- ished wall panels in wet areas.

Is tile backer board fireproof?

Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4″.

What is a bugle head screw?

A bugle screw is a form of self-drilling screw that’s specifically designed for drywall applications. Bugle head screws feature a countersunk head with a flat top and a concave under-head bearing surface.

What is DensGlass?

Widely recognized by the GOLD color, DensGlass® fiberglass mat gypsum sheathing has an exemplary track record that spans more than 30 years. It is a preferred substrate under brick, stone, stucco, siding and EIFS due to its ability to protect a structure against incidental moisture during and after construction.

Is tile backer board fire resistant?

Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4″.

What is DensGlass made of?

DensGlass® Sheathing is a gypsum panel made of a treated, water-resistant core, surfaced with fiberglass mats and a GOLD colored primer coating.

How long can DensGlass be exposed?

HardieBacker® cement board is a unique, cement based water resistant tile backerboard that can be used on walls, floors and worktops. The products meet the European standard for fibre cement – EN 12467 and its reaction to fire, in accordance with EN 13501-1, is A1,S1-d0.