Gas fireplace chimneys should be inspected and cleaned annually. There will not be any soot or creosote in the chimney since you are not burning wood, but you may find bird nests that need to be removed.

Hereof, Do I need vermiculite in my gas fireplace?

Place vermiculite outside the burner pan to cover sides and gas connections โ€“ if desired. NOT FOR USE in natural gas fireplace burner pans, which should be filled with silica sand as directed by the manufacturer. WARNING: DO NOT USE WITH NATURAL GAS LOG SETS!

Do you put sand in a gas fireplace? Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs. Replace the sand every few years to keep your flames dancing.


35 Related Questions Answers Found

 

Is vermiculite really dangerous?

As long as the asbestos is not released into the air, it is not harmful. If it is not being disturbed, there is very little exposure and very little danger. Pieces of vermiculite are brownish-gold and are about ยฝ inch in size. Pieces look like they are made of several layers.

What should a gas fireplace flame look like?

The burner flames from your natural gas furnace should look blue or almost completely blue. A healthy natural gas furnace flame is characterized by a roaring blue flame with a light blue triangle in its center. There may be a tiny tip of yellow.

What can I put behind a fireplace?

Air barrier material behind fireplaces must tolerate heat. Air barrier material can include thin sheet goods such as rigid insulation, sheet metal, or dry wall. These materials may be installed by insulators, framers, or subcontractors or vendors hired specifically to install the fireplace.

How many bags of vermiculite do I need?

The simple rule of thumb is that 1 bag of Duprรฉ vermiculite will cover 1 square metre to an approximate depth of 10cm. Bulk Bags of 1.2m3 and 2.2m3 are also available. Other packaging may be available on request.

How do I choose a gas fireplace log?

Determine the size of your gas logs
  1. Measure the front width of you fireplace.
  2. Measure the width at the back of your fireplace.
  3. Measure the depth from the front to the back of your fireplace.
  4. Measure the height from the top to bottom of the front your fireplace.

What kind of sand do you use in a gas fireplace?

Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs. Replace the sand every few years to keep your flames dancing.

What is the insulation looking stuff in my gas fireplace?

That looks like rockwool. It glows when it’s engulfed in the gas burner flames to represent glowing embers. There is a sand base in the burner to diffuse the gas if you’re burning NG. With LP gas that base material is usually vermiculite.

How do you start a gas fireplace?

Do I need vermiculite in my gas fireplace?

Place vermiculite outside the burner pan to cover sides and gas connections โ€“ if desired. NOT FOR USE in natural gas fireplace burner pans, which should be filled with silica sand as directed by the manufacturer. WARNING: DO NOT USE WITH NATURAL GAS LOG SETS!

What is vermiculite and what is it used for?

That’s because they contain vermiculite, a soil amendment that helps with water retention, aeration and nutrient exchange. Vermiculite is a phyllosilicate mineral that is mined from rocks formed 1.5 to 3 billion years ago. Crude untreated vermiculite is used in a variety of industrial materials.

How do you clean a gas fireplace?

Steps
  1. Turn the gas off. Before you begin cleaning your gas fireplace, you must first make sure you turn the gas valve to the โ€œoffโ€ position.
  2. Brush off the gas logs. Remove the gas logs from the fireplace and take them outside for cleaning.
  3. Vacuum the lava rocks.

Does Walmart sell vermiculite?

Coarse Vermiculite, 4 cubic foot bag – Walmart.com.

What are embers in gas fireplace?

Embers are the fuzzy clumps included with your gas logs that react to the flame and create the glowing effect under the logs of a wood burning fire. They add realism to any gas log fireplace. There are a variety of embers available including our customers’ favorite Platinum Bright Embers.

How do you deal with vermiculite insulation?

If You Have Vermiculite Insulation
  1. Leave vermiculite insulation undisturbed in your attic or in your walls.
  2. Do not store boxes or other items in your attic if it contains vermiculite insulation.
  3. Do not allow children to play in an attic with vermiculite insulation.
  4. Do not attempt to remove the insulation yourself.

How do I make my gas fireplace flame yellow?

Perlite is made from a mined volcanic glass of the same name. As a raw material it contains water, trapped by the rapid cooling of lava. The moisture vaporizes explosively when heat is applied.

How do I make my gas fireplace flame yellow?

Sta-Green 8-Quart Organic Vermiculite at Lowes.com.

What are fake logs in gas fireplaces made of?

Fake gas fireplace logs are made of ceramic or a similar material. These absorb high amounts of heat without being damaged. Without them, most of the heat from the burning gas would just escape out the vent. By retaining more heat, the ceramic provides warmth and comfort for your home.

How do you insulate around a chimney pipe?

Seal the gap between the flue and metal flashing with special high-temperature caulk. Don’t use spray foam. Form an insulation dam to prevent insulation from contacting the flue pipe. Cut enough aluminum from the coil to wrap around the flue plus 6 inches.

Is vermiculite still used?

Vermiculite insulation is no longer used in new construction, but an estimated one million homes in the U.S. still have it, according to the USGS. Vermiculite is a naturally occurring mineral that is perfectly safe when pure.

What is ember glow?

An ember is a glowing, hot coal made of greatly heated wood, coal, or other carbon-based material that remain after, or sometimes precede, a fire. Embers can glow very hot, sometimes as hot as the fire which created them.

Gas fireplace glowing embers are made of mineral materials that allow for heat distribution and expansion but never get completely burnt up. Many of these products are derived from vermiculite, a material that expands when it is subjected to high heat in a process known as exfoliation.

How long do gas fireplace embers last?

five years

How do you arrange ceramic fireplace logs?

How to Arrange Gas Logs
  1. Place the largest ceramic logs on the bottom to serve as the foundation for the fire.
  2. Leave 2 inches (5 centimeters) between logs.
  3. Make sure none of the logs is blocking the gas flow.
  4. Arrange smaller logs on top of the foundation logs.
  5. Turn on the gas and light the fire using either matches or the automatic igniter.

How do you arrange ceramic fireplace logs?

To adjust the color of the flames so there is a soft yellow tip at the top of the flames, the gas adjustment should be left alone and the air input reduced by partially closing the air shutter located at the end of the burner.

Do gas logs wear out?

Gas fireplace burner sets eventually wear out or rust out, causing them to emit gas in a different manner and volume than they did when new. This different flame pattern may cause โ€œdirtyโ€ burning and soot buildup.

Is it safe to leave embers in a fireplace?

It’s OK to leave the ashes unattended while you sleep, as long as the fire is completely out (there are no flames or red embers).

Does vermiculite have asbestos?

Not all vermiculite products contain asbestos, but some do. An EPA study showed some vermiculite products contain low levels of asbestos. Asbestos is found primarily in the unmixed vermiculite product although some was found in pre-mixed potting soils.

Does vermiculite decompose?

Vermiculite decomposes with time to release the plant nutrients potassium and magnesium. Perlite does not furnish any nutrients to the plants. Its particles do not decompose with time, so perlite is a better choice than vermiculite for plants that will be repotted infrequently.

How do gas fireplace embers work?

It’s OK to leave the ashes unattended while you sleep, as long as the fire is completely out (there are no flames or red embers).

What is perlite used for?

In horticulture, perlite can be used as a soil amendment or alone as a medium for hydroponics or for starting cuttings. When used as an amendment it has high permeability / low water retention and helps prevent soil compaction.

Gas fireplace glowing embers are made of mineral materials that allow for heat distribution and expansion but never get completely burnt up. Many of these products are derived from vermiculite, a material that expands when it is subjected to high heat in a process known as exfoliation.