How to add a sensor to your SimpliSafe alarm
  1. Press MENU on your Keypad and enter your MASTER PIN.
  2. Select “Add Sensors” in the Menu system and then choose the type of sensor you want to add.
  3. Enter the new sensor’s 5 digit serial number.
  4. Press enter and you will hear the Base Station announce “sensor added.”

Then, How do you test SimpliSafe?

Put the Base Station into Test Mode by following these instructions: Press “menu” on the Keypad, and enter your Master PIN. Navigate to “Test Mode” and press the right rocker to select it. Testing the Alarm w/o Dispatching Police | Wireless

Considering this, How do I install SimpliSafe doorbell video?

Installing SimpliSafe Video Doorbell
  1. Turn off the power to your doorbell at the circuit breaker.
  2. Remove your existing doorbell.
  3. Thread the doorbell wires through the center of the mounting bracket.
  4. Screw the mounting bracket to the wall.
  5. Connect wires to the mounting bracket.
  6. Slide your doorbell into place.

26 Related Questions and Answers Found 💬


What is the base station for SimpliSafe?

Base Station: The Base Station is the control center of the system. It wirelessly connects to the Emergency Dispatch Service to notify you and the authorities of any trouble. The Base Station also provides voice prompts during daily operation and sounds the alarm siren in the event of an intrusion.

Does SimpliSafe work with home automation?

Compared to Frontpoint, one of our top-rated home security systems, SimpliSafe falls short in smart home integration. The newest generation of SimpliSafe’s products can be controlled via voice by both Google Home and Amazon Alexa. Simplisafe is also compatible with Nest Thermostats and August and Yale smart door locks.

Is ADT better than SimpliSafe?

The biggest difference? ADT requires a monitoring contract, whereas SimpliSafe does not. Also, only ADT can support smart home features and is available in areas without cell service. On the plus side, SimpliSafe is much cheaper than ADT Monitoring in the long run.

Do you need a phone line for SimpliSafe?

With SimpliSafe, you can choose from a landline, broadband, or cellular monitoring options. Most of the SimpliSafe equipment is wireless and doesn’t require a landline phone. The base needs a power source, while the keypad and sensors are mounted with sticky pads.

How do I name my sensors with SimpliSafe?

Go to the sensor list on the webpage and “hover” your mouse arrow over the sensor name. Your serial number will appear in a balloon. Then you can match it to the specific sensor and name it, one by one. If you add more sensors, its easy as you will be prompted to pick one of the generic names or enter a custom one.

Does SimpliSafe have an alarm?

SimpliSafe is a no-contract, self-installed alarm system that offers affordable professional monitoring plans so someone is always keeping an eye on your system. SimpliSafe is a total home care alarm system, meaning you can add on equipment and customize your system to cover more than just break-ins.

How do you remove SimpliSafe sensors?

To remove a sensor from your system:
  1. Open the Menu on your keypad (using your Master PIN)
  2. Select “Devices” and navigate to the device you’d like to remove. Select it with the right rocker.
  3. Scroll to the bottom of the sensor’s listed settings and select “Remove”.
  4. Press “Off” to exit the menu.

How does a water sensor work?

Keypad: Slide the Keypad up and off of its mounting bracket. Slide the battery cover off of the back of the Keypad. This will expose four AA batteries, which can then be replaced.

Does SimpliSafe work with ring?

Yes, with SimpliSafe and Ring, you’ll be able to arm and disarm your security system by mobile app.

Does SimpliSafe have a monthly charge?

SimpliSafe Monitoring Plan Monthly Costs

The Standard is a mere $14.99 a month, one of the least expensive on the market, and it’ll get you 24/7 live monitoring with a cellular connection to emergency responders.

How do I add a device to SimpliSafe?

For customers with Interactive Monitoring plan, you can log in to your online account and navigate to the “Devices” heading under “Settings”.
  1. In the top right hand, section click on the Add Device button.
  2. In the pop-up window that appears select the device type, serial number, and optionally give the device a nickname.

How do I add monitoring to SimpliSafe?

Navigate to

If this is the first product you’ve set up with us:

  1. Log in to your account on the SimpliSafe App.
  2. Click the “Activate monitoring” button in the center of the screen.
  3. Follow the directions on the screen to activate your monitoring service.

How do I order more SimpliSafe sensors?

Does SimpliSafe have an audible alarm?

If SimpliSafe is just too pricey for your needs and all you want is something that will sound an alarm when someone breaks in through a door or window and call the police or fire department, the Ring Alarm is the next best option.

Is SimpliSafe any good?

SimpliSafe is the best option for low cost professional monitoring with no contracts. SimpliSafe is contract-free, inexpensive, and has DIY installation. If you don’t want to pay for monthly monitoring, the system still works as a self monitored alarm system.

Can you buy SimpliSafe in stores?

Is SimpliSafe available in stores? Yes. You can find SimpliSafe products at your local BestBuy, Sam’s Club, and CostCo with more additional retail chains being added regularly. You can also purchase many of our products on Amazon.

Where do I put SimpliSafe base station?

The first is to put the base in the center of the most used part of the house (kitchen, family room etc) and utilize the voice and light features.

How do I activate my SimpliSafe key fob?

The step-by-step SimpliSafe Easy Setup Wizard can be accessed from any computer using your Keychain Remote. Just plug the Keychain Remote into a USB port and the SimpliSafe Easy Setup Wizard will launch and guide you through setting up and using your home security system.

How do you program SimpliSafe?

How to Install and Set Up the SimpliSafe Security System
  1. Step One: Install the Base Station. Every SimpliSafe system comes with a base station.
  2. Step Two: Install the Keypad. The keypad is how you’ll control your security system.
  3. Step Three: Install the Sensors and Other Devices. We’ll start with a door/window sensor.

How does a water sensor work?

Hold down the black reset button on the back of the siren while at the same time pressing the off button on your keychain remote several times until the siren chirps. Then the siren will be in sync with you system.

How loud is 60 decibels?

None of the new (SS3 from January 2018) sensors work with the older SS2 system. Only the camera (and now the doorbell) work with both systems. If you are just purchasing sensors. go to, and select your system.

What causes pinhole leaks in copper water pipes?

As copper plumbing becomes old, pinhole leaks become increasingly common. Pinhole leaks can also be caused by particles of corrosion from old water heaters. When the interior of a hot water tank begins to corrode, steel particles can accumulate inside the copper hot-water pipes.

How do plumbers check for water leaks?

Use your water meter to check for leaks

The best way too determine if you have a leak in your plumbing system, is by first checking your water meter. Make sure no water is being used inside or outside of your house. Locate your water meter and check the leak indicator to see if it is moving.

How do plumbers check for water leaks?

How Do Water Sensors Work? A water sensor can detect the presence of water, often by measuring the electrical conductivity of the water present and completing a circuit to send a signal. Some water sensor systems can be programmed to shut off the water to the house to prevent a small leak from becoming a large one.

How long do the batteries last in SimpliSafe sensors?

5 years

Is SimpliSafe battery operated?

SimpliSafe wireless sensors run on lithium batteries, ensuring your security system is running even when the electricity grid fails. Because lithium powercells provide long lasting power, you don’t need to think about replacing them for up to 5 years.

Where do you put the SimpliSafe siren?

Where should my auxiliary siren go? Your Auxiliary Siren is weatherized, so you have the option of placing it under an eave or on the porch outside your home. It will draw attention to your home and alert your neighbors that something is wrong (which will not make that burglar happy).

Does SimpliSafe have battery backup?

In the event of a power outage, your SimpliSafe Base Station is equipped with a backup rechargeable battery supply that will keep your Base Station powered for up to 24 hrs. It also features a cellular module that operates without WiFi.

Does the new SimpliSafe work with the old?

SimpliSafe wireless sensors run on lithium batteries, ensuring your security system is running even when the electricity grid fails. Because lithium powercells provide long lasting power, you don’t need to think about replacing them for up to 5 years.

How do I change the battery in my SimpliSafe alarm?

The Keypad will alert you when any batteries for your wireless security system are low so that you can replace them. To change the batteries in your sensors or Keypad, push up on the front of the sensor (in the direction of the blue arrow) – the back will stay on the wall and the battery(ies) will be exposed.

What does 110 dB sound like?

None of the new (SS3 from January 2018) sensors work with the older SS2 system. Only the camera (and now the doorbell) work with both systems. If you are just purchasing sensors. go to, and select your system.