Calculate your area

  1. Measure the length of your space.
  2. Measure the width of your space.
  3. Multiply the length by the width to calculate the area in square metres.

equally, How do you measure square millimeters?

There are 1000000 square millimeters in 1 square meter. To convert from square meters to square millimeters, multiply your figure by 1000000 .

Then, What is 3 meters by 3 meters in square meters?

So then 3 m by 3 m equals 9 m^2.

likewise How big is 100 square meters? 100 square metres could be the area of a square 10 metres on each side. In the old measures, an area just a bit smaller than 33 feet by 33. Alternatively, an area 12.5 by 8 metres or 20 by 5. This would be about the floor area of a larger single storey house, maybe one with three or four bedrooms, or a large apartment.

How many 60×60 tiles is 1 square meter?

The quantity of 60 x 60 tiles in a square meter (m2) equals 278 tiles. Assuming dimensions of the tile width and height are in millimetre measurements, which equates to 6cm x 6cm tiles in a square metre.

17 Related Questions Answers Found

What is square mm in cables?

Convert from square mm to diameter mm

Wire
mm

2
mm

6

2.8

10

3.6

16

4.5

What is the meaning of sq mm in cable?

Answer / p. h. godavary. Cable size (area of each core) is normally specified in square millimeters. (sq. mm). In this case it is 35 sq.

How do you calculate cable in square mm?

Full Load Current = (KVA · 1000) / (1.732 · Voltage): Full Load Current = (100 · 1000) / (1.732 · 415) = 139 Amp.




Let’s select 3.5 core 70 Sq.mm cable for single run.

  1. Current capacity of 70 Sq.mm cable is: 170 Amp, …
  2. Total derating current of 70 Sq.mm cable = 170 · 0.93 = 159 Amp.

How many meters is 3 square meters?

Square meter to Meter Calculator

1 m

2

=
1 meter 1 m

2
3 m

2

=

1.7321

meter
9 m

2
4 m

2

=
2 meter 16 m

2
5 m

2

=
2.2361 meter 25 m

2
6 m

2

=
2.4495 meter 36 m

2

How many square Metres is 5×5?

Area of a 5m x 5m Rectangle


25

square meters
0.0025 hectares
38,750 square inches
269.10 square feet
29.900 square yards

How do I calculate 20 square meters?

If the length and width of the space are both 20 meters, 20 x 20 = 400 square meters.

How do I calculate lot size in square meters?

Multiply the length and width together. Once both measurements are converted into metres, multiply them together to get the measurement of the area in square metres.

How many square Metres is a 10×10 room?

10 ft multiplying by 10 ft equal to 100 sq ft. Therefore, 100 sq ft divide by 10.7639 sq ft is equal to 9.29 sq mt approximately.

How big is a house in square meters?

How large is the average home? Homes from the most recent decade have around 67.8 square metres of living space, LABC Warranty found – not much more than both decks of a London bus, which come to 55 square metres. This figure factors in living areas, kitchens and bathrooms, but does not include hallways or staircases.

How many tiles is 32 square meters?

Answer Expert Verified

Therefore, the number of tiles needed to cover the entire floor which has an area of 32 sq. meters, is 128 tiles.

How many tiles is 1 square meter?

This is a common question and ultimately this depends on the size of the tile. A 150 x 150mm will give you approximately 44 tiles to a square metre, but a 600 x 600mm tile will give you 2.8 tiles per square metre.

How many tiles do I need for 1 square meter?

one square metre

The result is 303 tiles.

How many amps can 2.5 mm cable take?

A 2.5mm cable is capable of supplying around 23-25 amps depending on the method of installation, so is fine, safe and compliant on a 20amp circuit breaker.

What is the meaning of mm square?

a unit of area measurement equal to a square measuring one millimeter on each side. Abbreviations: mm2, sq.

What is 22 gauge wire in MM?

Wire Gauge Conversion

Wire Number (Gauge) A.W.G. or B&S (Inches) A.W.G. Metric (MM)
22
0.0253″

0.6426mm
23 0.0226″ 0.574mm
24 0.0201″ 0.5106mm
25 0.0179″ 0.4547mm

What is 4 mm cable used for?

4 mm is most commonly used for high power ring mains, plug and socket wiring. 6, 10 and 16 mm are most commonly used for high powered small appliances such as cookers. This cable is suitable for indoor use only.

What is 1.5 sq mm cable?

1.5 Sq. mm copper conductor, PVC insulated unarmoured & galvanised steel strip / wire armoured control cables as per IS 1554 Part – 1. Conductor : CU conductor solid as per Cl.1 IS 8130 or stranded as per Cl. 2 IS 8130. Insulation Material : PVC Type – A as per IS 5831 / Option : HR PVC (Type – C ) as per IS 5831.

How many watts can a 2.5 mm cable take?

how many watts can a 2.5 mm cable take? 2.5 square BV wire, overhead wiring at 20 degrees, 220 volt power supply can be up to 4.4KW. Therefore, a 2.5 square BV wire can be used with a maximum of 4.4 KW.

How do you calculate power factor?

The power factor of an AC circuit is defined as the ratio of the real power (W) consumed by a circuit to the apparent power (VA) consumed by the same circuit. This therefore gives us: Power Factor = Real Power/Apparent Power, or p.f. = W/VA.

Tagged in: