Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

Also, How many square feet will 7 tons of gravel cover?

At a depth of 1 inch, the coverage is up to 240 square feet, and 3 inches can reduce the coverage rate to 80 square feet. One (1) ton of river rock covers approximately a 50-75 sq. ft.



How many square feet does a ton of gravel cover?

PRODUCT COVERAGE RATE PER TON OF MATERIAL
3/4”, 7/8,” 1” Screened Gravel
100 Square Feet @ 2” depth


May 28, 2020

Hereof, How much will a ton of gravel cover?

Un-compacted Cloburn aggregates weigh 1.4 tonnes per cubic metre. Therefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one tonne will cover 14 square metres.

Also to know What depth should gravel Be? What depth of gravel do I need? You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways. A larger aggregate will settle and bond together better than smaller ones.

What’s the best gravel for a driveway?


These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

  • Crushed Stone #411. It is crushed up #57 stone combined with rock dust. …
  • Quarry Process. …
  • Pea Gravel. …
  • Jersey Shore Gravel. …
  • Marble Chips. …
  • Blackstar or Blacktrap Rock.
16 Related Questions Answers Found

How many square feet will 10 tons of gravel cover?

Regarding this, “how many square feet does 10 tons of gravel cover?”, according to Imperial or US customary measurement system, in general, 10 tons of gravel can be sufficient to cover approximately 1080 square feet for 2 inch standard depth of construction project like roadways, pedestrian or others structure.

How many square feet will 16 tons of gravel cover?

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How much does a dump truck load of gravel cost?

A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.

How many yards of gravel does a dump truck hold?

Dump Truck Cubic Yardage – The Basics

While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.

How many tons of gravel does a dump truck hold?

How much can a dump truck carry? Typically, larger dump trucks can carry about 28,000 pounds or about 14 tons. On average, smaller dump trucks can transport around 13,000 to 15,000 pounds or 6.5 to 7.5 tons.

Should landscape fabric go under gravel?

Should landscape fabric go under gravel? Yes. Putting landscape fabric under gravel isn’t a requirement, but it is recommended. When used under gravel, it provides all the positives of weed control and added stability, without any of the negatives.

Should I put membrane under gravel?

Should I put the membrane under gravel? Yes. … Gravel isn’t always going to stop weed growth, but you’ll have a better shot at it than with much other material.

What should I put down before gravel?

Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel. The base rock stabilizes the pea gravel to provide a firm surface.

What is the cheapest gravel for a driveway?

Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.

How do I make my gravel driveway solid?


Project Summary

  1. Stake out the path of the driveway.
  2. Clear grass or topsoil from staked area.
  3. Calculate cubic yardage of gravel needed for each driveway layer.
  4. Schedule and prepare site for gravel delivery.
  5. Level the ground along the path of the driveway.
  6. Spread and compact the base layer of gravel.

How much does 2 tons of gravel cost?

Gravel Prices Per Ton. Bulk crushed stone and gravel prices are $10 to $50 per ton on average. Road base costs $18 to $30 per ton, and plain pea gravel or limestone costs $28 to $45 per ton.

How far will a dump truck load of gravel go?

When it comes to gravel, an ideal average is about 3,000 lbs per yard. A dump truck (pickup truck sized) can carry 1 yard and three-axle dump truck can carry about 16.5 yards of gravel. Always make sure to check the truck owner’s manual for exact weight capacity.

How many tons are in a dump truck of gravel?

A dump truck can hold anywhere from 13 to 25 tons of gravel, based on common sizes available for commercial use. Ten-wheelers are rated to reliably hold 13 tons, whereas the largest flat-bed trucks can contain 25 tons of gravel. There are several truck sizes in between for different loads.

How much does a ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

What is the cheapest rock for landscaping?

What is the cheapest rock for landscaping? Crushed gravel and pea gravel tend to be the cheapest landscape rocks. But you may come across other varieties at a good price.

How do I keep my gravel driveway from washing out?

Backfill the trenches with 1/2-inch drain rock using a shovel. When the drain rock has reached the level of the driveway, lay geotextile sheet on top of it before replacing the gravel. The geotextile sheet prevents dirt and silt from seeping into the drain and clogging it.

How many tons of gravel do I need for my driveway?

Measuring the Driveway

To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

How much gravel do I need for my driveway?

According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12. For example, if you decide on a depth of 4 inches of rock, the conversion is 0.33 feet.

How far will 15 ton gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.