To configure the message-of-the-day (MOTD) banner that displays when the user logs in to a Cisco Nexus 5000 Series switch, use the banner motd command. To revert to the default, use the no form of this command.

Then, What is login command in Cisco?

Login command is used in VTY for password that is specified to be checked at login. If you do not use login command you will not able to use the specified password for the vty to login. Login can also be used with login local. In which you can config a username and password on the router to be auth.

Considering this, Which two traffic types require delay sensitive delivery choose two? Explanation:Voice and video traffic have delay sensitive characteristics and must be given priority over other traffic types such as web, email, and file transfer traffic.


35 Related Questions and Answers Found πŸ’¬

 

Table of Contents

What is banner message?

A banner is a message that is presented to someone using the router. The type of banner you configure determines when this message is shown to the user. You can configure three main types of banners on a Cisco router. The idea was to display a temporary notice to users, such as issues with system availability.

What does show run command do?

The show running-config command shows the router, switch, or firewall’s current configuration. The running-configuration is the config that is in the router’s memory. This command can be abbreviated sh run.

What is the shortest abbreviation of copy running config startup config?

CCNA Certification/Appendix F – Abbreviated Commands and Keyboard Shortcuts
Abbreviation Command
shut shutdown
run running-config
start startup-config
wr write (copy running-config startup-config)

What does show run command do?

The show running-config command shows the router, switch, or firewall’s current configuration. The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router. This command can be abbreviated sh run.

What is the shortest abbreviation of copy running config startup config?

CCNA Certification/Appendix F – Abbreviated Commands and Keyboard Shortcuts
Abbreviation Command
shut shutdown
run running-config
start startup-config
wr write (copy running-config startup-config)

How do I save my running config to startup?

The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show runningconfig command. Enter the copy runningconfig startupconfig command to save the current running configuration to the startup configuration file in NVRAM.

What is Cisco login banner?

Different Banners

Cisco IOS routers support a number of banners, here they are: MOTD banner: the β€œmessage of the day” banner is presented to everyone that connects to the router. Login banner: this one is displayed just before the authentication prompt. Exec banner: displayed before the user sees the exec prompt.

Does service password encryption encrypt future passwords?

Router#show interfaces

This command shows the status and configuration of interfaces. By default it will display all interfaces.

What is logging synchronous command in Cisco?

The logging synchronous command is used to synchronize unsolicited messages and debug output with solicited Cisco IOS Software output. When the syslog logging stops working, disabling the logging synchronous command on the console line may cause logging to resume.

Which command will display the contents of Nvram?

To display the contents of NVRAM (if present and valid) or to show the configuration file pointed to by the CONFIG_FILE environment variable, use the show startup-config EXEC command.

What shortcut keys are used to go directly from global configuration?

The shortcut keys used to go directly from global configuration mode to privileged exec mode is CTRL+Z.

How do I create a Cisco banner?

Steps to configure banner through CLI.
  1. Login to the device using SSH / TELNET and go to enable mode.
  2. Go into the config mode.
  3. Use below command to configure banner for required banner types (motd / login / exec)
  4. Exit config mode.
  5. Copy the running configuration into startup configuration using the below command.

Why is the enable secret password displayed differently?

Why does the switch respond with startup config is not present?

Why does the switch respond with startupconfig is not present? The switch responds with “startupconfig is not present” because the start up configuration hasn’t been saved yet. Why is the login command required? The login command is required because it makes it so the user will be prompted with a login request.

What is logging synchronous command in Cisco?

The logging synchronous command is used to synchronize unsolicited messages and debug output with solicited Cisco IOS Software output. When the syslog logging stops working, disabling the logging synchronous command on the console line may cause logging to resume.

What is displayed for the enable secret password?

The enable secret password is displayed differently from what I configured because it is an automatically encrypted password. If you configure any more passwords on the switch, will they be displayed in the configuration file as plain text or in encrypted form?

Why is it important to configure a hostname on a device?

Explanation:It is important to configure a hostname because various authentication processes use the device hostname. Hostnames are helpful for documentation, and they identify the device during remote access.

Which command will display the contents of Nvram?

To display the contents of NVRAM (if present and valid) or to show the configuration file pointed to by the CONFIG_FILE environment variable, use the show startup-config EXEC command.

How do I remove banner motd?

To remove the banner or MOTD, use the no form of the command. and the MOTD configuration, use the no bannermotd command without any keywords and arguments. The system-defined banner is displayed.

Does service password encryption encrypt future passwords?

You can set the password of vty lines by the following steps:
  1. Enter global configuration mode of the CISCO router.
  2. Put the command line vty 0 4 to the router.
  3. Provide the password by using password command.
  4. At last, put the command login.

What is enable secret password in Cisco?

enable secret is automatically encrypted when set. Also, it sets a “password‘ in-order to log into privilege exec mode. service passwordencryption is a command that encrypts passwords after you reload the device or do a show run command. Please take note that a “secret” is prefer by the device over a “password

How do I save my running config?

To display the current running configuration, enter the show runningconfig command. Enter the copy runningconfig startup-config command to save the current running configuration to the startup configuration file in NVRAM. To display the startup configuration, enter the show startup-config command.

What does copy run start do?

Copy Running-Config Startup-Config (also known as, CopyRunStart) – This Saves the current running configuration to the startup configuration in the NVRAM. This cisco command is necessary to save your running configuration so that when the router reloads, it loads the up the right configuration file.

What does copy run start do?

It will encrypt all current and future passwords. Explanation: Enable vty, console, AUX passwords are configured on the Cisco device. If the service passwordencryption is used, all the passwords are encrypted.

Which two functions are provided to users by the context sensitive help feature of the Cisco IOS CLI choose two?

Explanation:Context-sensitive help provides the user with a list of commands and the arguments associated with those commands within the current mode of a networking device. A syntax checker provides error checks on submitted commands and the TAB key can be used for command completion if a partial command is entered.

How do I enable IPv6 routing?

enable IPv6 routing on a Cisco router using the ipv6 unicast-routing global configuration command. This command globally enables IPv6 and must be the first command executed on the router. configure the IPv6 global unicast address on an interface using the ipv6 address address/prefix-length [eui-64] command.

What is service password encryption?

The β€œservice passwordencryption” command allows you to encrypt all passwords on your router so they cannot be easily guessed from your running-config. It is meant to prevent someone from looking over your shoulder and seeing the password, that is all. This is configured in global configuration mode.

What does copy run start do?

Copy Running-Config Startup-Config (also known as, CopyRunStart) – This Saves the current running configuration to the startup configuration in the NVRAM. This cisco command is necessary to save your running configuration so that when the router reloads, it loads the up the right configuration file.

What is service password encryption?

enable IPv6 routing on a Cisco router using the ipv6 unicast-routing global configuration command. This command globally enables IPv6 and must be the first command executed on the router. configure the IPv6 global unicast address on an interface using the ipv6 address address/prefix-length [eui-64] command.

Which type of network threat is intended to prevent authorized users from accessing resources?

Denial of Service attacks

What information about a Cisco router can be verified using the show version command?

enable secret is automatically encrypted when set. Also, it sets a “password‘ in-order to log into privilege exec mode. service passwordencryption is a command that encrypts passwords after you reload the device or do a show run command. Please take note that a “secret” is prefer by the device over a “password