STEP 1: Press and hold the PROGRAMMING BUTTON on the individual RTS transmitter that has already been programmed until the window coverings jogs: PROGRAMMING MODE is activated for 2 minutes. STEP 2: Use the ARROW buttons or to select the channel on the Telis 16 RTS to be programmed.

Also, What is somfy MyLink?

The Somfy myLink™ is a simple device that turns your smartphone or tablet into a sophisticated remote control for motorized products featuring Radio Technology Somfy®. myLink now works with Alexa, IFTTT and Google Assistant Via IFTTT!

In this way, Is somfy compatible with Apple HomeKit? The Somfy Scene Launcher controls you home’s automated shades. Compatibility with Somfy is planned for Amazon Alexa, IFTTT, Apple HomeKit, Samsung SmartThings and other third-party devices like Philips Hue and Sonos.

29 Related Questions Answers Found


How much wind can a retractable awning withstand?

When fully retracted (closed), some retractable awnings will survive 100 mph winds.

Is somfy compatible with Alexa?

Somfy-powered Products Are Now Compatible with Amazon Alexa. With natural speech you can now enjoy the comfort, convenience, privacy, and energy saving benefits of Somfy products. Somfy’s new Alexa skill allows for control of all Radio Technology Somfy® (RTS) motorized products controlled by the myLink app.

How much does a SunSetter retractable awning cost?

A basic 16-foot-wide-by-10-foot-deep SunSetter awning costs about $1,330 with a hand crank or about $1,650 for a motorized version. Retrofit motor kits are about $300.

How much does a SunSetter awning weight?

Each awning weighs between 9lbs and 18lbs per foot of length. That means an average 18′ wide awning weighs between 160-320lbs.

How do I link somfy to Alexa?

To connect your myLink to the Alexa skill, open the myLink app and navigate to the main menu. Click on Amazon Alexa, then click on “link new account”, this will start the account linking wizard. Enable the skill by searching for Somfy myLink in the Amazon Alexa app.

How far out do retractable awnings go?

How far out can my retractable awning go? Most retractable awnings can project from 5 feet up to 10 feet.

How do I change the battery in my Somfy remote?

Using a small screwdriver loosen the screws on the reverse side of the remote control and remove the back cover. 2. Replace the battery with one 2430 Lithium 3V battery.

How long do fabric awnings last?

5-15 years

How far can an awning extend?

Keough said, adding that while retractable awnings can range anywhere from 5 to 40 feet in width, the distance they can project out from a wall generally cannot exceed 14 feet.

How do you attach Sunsetter awnings to vinyl siding?

Follow the 6 simple steps to install it on vinyl siding:
  1. Step 1: Location. First determine the location of the awning and take an accurate measurement of the same with the measurement tape.
  2. Studs:
  3. Header board:
  4. The mounting brackets:
  5. Fix the mounting brackets:
  6. The shade:

What is the pitch of a Sunsetter awning?

Your Awning’s pitch (angle) is pre-set at the factory with a drop of 29 inches from the top of the Wall Brackets to the lowest point at the Front Bar of the Awning.

1. Using the previously programmed Telis remote, press and hold the programming button on back of remote until window covering “jogs.” 2. Using the new Telis 1 remote, briefly press the programming button until the window covering “jogs.” Window covering has now learned the commands of the new Telis remote.

How long does it take to install a SunSetter awning?

Once they are made, standard awnings can take anywhere from two hours to two days to install.

How does a Somfy remote work?

How Does It Work? Simply press a button on a remote control or wall switch and window coverings move with ease. There is no need to point or aim the transmitter at the covering because Radio Technology Somfy® (RTS) is omni-directional. And just like a garage door opener, the radio waves travel through walls.

How do I setup my Somfy remote?

The first step is to try enabling user mode. To enable user mode, you need your Somfy remote and a paperclip or similar device. With the paperclip, press and hold the programming button on the back of the transmitter until the window covering jogs. The window covering is now in user mode.

How do I program a remote?

How to program a remote from GE
  1. Remove the battery cover and batteries from the GE universal remote.
  2. Download the list of codes for your model from the Jasco website.
  3. Turn on the device you’re programming (TV, DVD player, DVR, etc.).
  4. Hold the SETUP button for four seconds until the indicator light illuminates red.