Multiply width of room x length of room x 1.5 = amount of total minimum wattage needed (assuming an eight foot ceiling). Divide by 60 to get the number of 60-watt equivalent bulbs required. Then, add up the wattage in each bulb in each fixture to figure out how many light fixtures are needed.

Hereof, How many LED recessed lights per room?

Make a Plan

Whatever new recessed lighting you add should work with your existing fixtures. Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

Can you have too many recessed lights? In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill. An expert can help you plan for the right number of lights based on the size of the space and the technical aspects of the light fixtures in question.


25 Related Questions Answers Found

 

Is recessed lighting outdated?

5 Advantages of Recessed Canister Light Fixtures

But recessed light fixtures usually are not very visible, making them a good choice where you want the light itself to be the design element, not the fixture hardware. The reason recessed lights never go out of style is that they have never really been in style.

Should I use 4 inch or 6 inch recessed lights?

Size and Layering

Size recommendations say to place 4inch lamps 4 feet apart and 6inch lamps 6 feet apart. However, these are general guidelines. Smaller task or accent lighting using 2-inch or 3-inch lamps can work in conjunction with well-placed general recessed lighting.

Should recessed lighting be symmetrical?

If installing recessed lights try to center the light with the front edge of the counter top. Don’t worry about recessed lighting being installed perfectly symmetrical on the ceiling. Sometimes ceiling joists prevent installing recessed lights exactly where you want them.

How many can lights can be on one switch?

The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.

How far apart do you put LED downlights?

Generally when installing LED downlights, it is recommended to install lights 1m from the walls and space the lights between 1.2m and 1.5m apart. Positioning can alter depending on the amount of light required and the design of the room, which should be taken into consideration when planning lighting positioning.

Are LED recessed lights good for kitchen?

Recessed Lighting

To avoid reflected glare on shiny countertops, it’s best to avoid direct downlights; cross-illumination can help in this case. If you have existing cans, LED retrofit trim kits and/or retrofit LEDs bulbs are a great option; they come in a wide variety and are easy to install.

How many lights do I need per square foot?

For the average space of 250 square feet, you’ll need roughly 5,000 lumens as your primary light source (20 lumens x 250 square feet). In your dining room, you’ll want about 30 lumens per square foot on your dining table (to see, not examine, food), so if your table is 6 x 3 feet, that’s 540 lumens.

How many lights do I need?

Can you have too many recessed lights?

It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.

Are recessed lights good for bedrooms?

Recessed ceiling lights have become a popular way to add lighting to bedrooms. Recessed lights are perfect for providing ambient or general lighting, giving your bedroom the feel of being bathed in sunlight. They can also be strategically placed to accent specific areas or features of your bedroom.

Where should I put recessed lighting?

The common rule is that 4-inch fixtures should generally be placed at least 4 feet apart and 6-inch fixtures about 6 feet apart. Center recessed lighting fixtures in front of the objects you wish to lightβ€”a painting, bookshelf, or drapery panels, for exampleβ€”and about 12 to 18 inches in front of that object.

How many LED recessed lights per room?

A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.

Should recessed lighting be symmetrical?

Don’t worry about recessed lighting being installed perfectly symmetrical on the ceiling. Sometimes ceiling joists prevent installing recessed lights exactly where you want them. Most people never pay attention to the location of the recessed cans on the ceiling.

How far apart do you put LED downlights?

Spacing. Recessed downlights are generally positioned 1.5 to 2 ft. away from walls with a space of 3 to 4 feet between each light. Dividing the ceiling height by two is a way of gauging how much space to leave between each downlight. Thus, if your ceiling is 8 foot high, place your lights 4 feet apart.

How do you measure recessed lighting?

Also, the diameter of the bulb is consistent with how far the spacing should be: 4-inch bulbs should be 4 feet apart, 5-inch bulbs should be 5 feet apart, and 6inch bulbs 6 feet. Overall, the wattage should range from 2 1/2 to 3 per square foot.

How do you measure recessed lighting?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

How far from the wall should recessed lights be?

Accent Lighting

If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.

How far off the wall should recessed lights be?

Space wall wash downlights apart at the same distance as they are mounted from the wall. For ceilings up to 9 feet high, mount recessed lights 2 to 3 feet from the wall and spaced 2 to 3 feet apart.

How many lights do I need per square foot?

For the average space of 250 square feet, you’ll need roughly 5,000 lumens as your primary light source (20 lumens x 250 square feet). In your dining room, you’ll want about 30 lumens per square foot on your dining table (to see, not examine, food), so if your table is 6 x 3 feet, that’s 540 lumens.

Should I put recessed lighting in bedroom?

Recessed ceiling lights have become a popular way to add lighting to bedrooms. Recessed lights are perfect for providing ambient or general lighting, giving your bedroom the feel of being bathed in sunlight. They can also be strategically placed to accent specific areas or features of your bedroom.

Which recessed lights are best?

A good rule of thumb is to aim for 50 lumens per square foot for ambient lighting, 300 lumens per square foot in areas that require task lighting, and a moderate 75 lumens per square foot for accent lighting.

Can light placement in vaulted ceiling?

Make sure to place recessed lights approximately three feet away from the wall. As long as the lights reflect on the wall at the appropriate distance, they will make the room seem brighter and larger. The layout rules are the same on a vaulted ceiling as they are on a flat ceiling.

How do I light my living room?

Pinpoint your work areas and light them directly. “Ideally, lights should be below your eye level,” says Adelman. “Set up task lights under the stove range or cabinets to light countertops.” In living rooms, use a combination of floor lamps, table lamps, and down-lights (recessed or track lighting).

How do I light my living room?

There is a range of recessed light sizes. To determine the size, measure the diameter of the cut-out opening in inches, not including the trim. Choose one that will accommodate the height of your ceiling or the size of your wall.

How many can lights for basement?

Basements are dark. Even though it may seem like 5 lights should be plenty, one extra is probably the right answer. Yes, that means another $25 or so worth of lighting material. Yes, that means one more pot light to wire.

How many LED ceiling lights do I need?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

How do you calculate lighting for a room?

Lighting Calculation – Summary

Calculate the amount of lumens you need. Multiply the area in square meters by the lux, or the area in square feet by the footcandles. work out how many bulbs you need. Divide the number of lumens by the number of lumens delivered by each bulb.

How many lights do I need in a room?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

How much light do I need in my garage?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

Where should recessed lighting be placed in a bathroom?

And, unlike regular wall or ceiling mounted light fixtures, recessed bath lights can be installed in shower stalls or over tub areas. When using recessed lights for the bathroom mirror, place the fixtures as close to the plane of the mirror as possible.

What is the cost of installing recessed lighting?

A good rule of thumb is to aim for 50 lumens per square foot for ambient lighting, 300 lumens per square foot in areas that require task lighting, and a moderate 75 lumens per square foot for accent lighting.