CL – Child Lock
  1. Open the dishwasher door.
  2. Press the POWER button.
  3. Select the cycle (and desired options).
  4. Press and hold the RINSE and SPRAY buttons for three seconds. The child lock indicator will illuminate in the display once the child lock is activated.
  5. Close the door to begin the cycle.

Also, What does CL mean on a washer?

CHILD LOCK

In this way, How do I turn off the control lock on my LG dishwasher? Press and hold Dual Zone for 3 seconds to activate or deactivate this function. The control lock indicator will illuminate on the control panel if the feature is activated. Note: You must deactivate the control lock feature to select new settings. The Control Lock feature does not lock the door.


37 Related Questions Answers Found

 

How do you unlock a LG washer?

How to Unlock a LG Tromm Washing Machine
  1. Locate the “Door Lock” indicator light on the LCD display to verify that the door is locked.
  2. Press the “Start/Pause” button on the front of the control panel to pause the current cycle.
  3. Activate the “Drain & Spin” cycle to drain the washer if it is full of water.

How do I reset the child lock on my TV?

To reset the PIN code of the TV and to remove the child lock, proceed as follows: Press the β€œSettings” button on the remote control and select: [all settings] >[Child lock] > [Set/Change code] . If the TV asks for a code, enter the PIN 8888.

How do I reset my LG washing machine?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do I turn off child lock on Samsung?

Steps
  1. Open the Play Store. .
  2. Tap the ☰ menu. It’s the three horizontal lines at the top-left corner of the screen.
  3. Tap Settings. It’s about halfway down the menu.
  4. Scroll down and tap Parental Controls.
  5. Slide the “Parental controls are on” switch to Off.
  6. Enter your four-digit PIN and tap OK.

How do you reset an LG TV?

How do I reset my LG television to factory settings?
  1. Step 1: open the menu.
  2. Step 2: open All settings. Select the option Support and press the OK button.
  3. Step 3: navigate to General. Select the General option.
  4. Step 4: go to Reset to Initial Settings. Go down until you see the Reset to initial settings option.
  5. Step 5: confirm the reset.

How do I lock my kids phone?

Lock Your Screen

The first thing you need to do is be sure your kid can’t get into your phone when you leave it lying around. Go to Settings > Security > Screen Lock and choose a PIN, pattern or password lock for your screen.

How do you unlock child lock without remote?

You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.

What is key lock on LG TV?

How do you unlock a child lock in a car?

Open the rear door you want to lock. Look at the side of the door (the part that you can’t see when the door is closed). You will likely see one of the following locking devices – usually requiring you to push a lever down or up, or turn your key in a slot to engage the lock.

How do you stop a washing machine?

Press the “Start/Pause” button and wait a few minutes; the washing machine safely drains away any water in the drum and unlocks the door. Add or remove an item or make changes to the cycle, close the door and press the “Start/Pause” button a second time to resume the cycle.

How do I reset my LG TV without a remote?

LG TV Service Menu Instructions
  1. Method 1. Press and Hold button on remote as well as TV panel at the same time for a few seconds.
  2. Method 2. Press and hold the {MENU} button on the remote and the {MENU} button on the TV at the same time for at least 5-7 seconds.
  3. Method 3.
  4. Method 4.

How do you open a locked Samsung washing machine?

The washing machine door will be locked when it detects water in the unit. Wait and see if it drains out by itself. When water is no longer in the washer, reset the washer by pressing the ON/OFF or START/PAUSE button. Then wait for a minute to pass, and you can then unlock the door.

How do I reset my password on my LG TV?

Reset forgotten lock password.

Lock System.

  1. Go to “Lock” tab and pop – up dialog password with 4 digit.
  2. Press “MUTE” button 3 times.
  3. Pop – up new dialog with 6 digit.
  4. Enter master password 129472 (* try 210499 for older version of LG TV)
  5. Enter your new password.
  6. Done.

How do I fix the CL code on my LG washer?

LG Washer Error Code Cl Fix. CL means that your washing machine’s CHILD LOCK is ON. You can find two buttons Temp and Options in the panel. Turn ON the machine, press these two buttons together for 3 seconds and that’s it.

What does d80 mean on LG dryer?

To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a β€œreset” signal to all the components.

What does d80 mean on LG dryer?

How do I perform a drain only cycle? If it is necessary to drain the water from the washer, power the machine on and press the spin speed key until no spin is selected then press start. If done correctly, 1 minute of estimated time will display on the clock, the unit will drain out the water, and the cycle will end.

What does CL mean on a dryer?

Control Lock mode

What does CL mean on a LG washing machine?

CHILD LOCK

How do you unlock a top load washer?

To unlock the lid:
  1. Pausing the machine will allow you to open the lid.
  2. During the spin cycle, pausing the washer does unlock the lid, but you must wait until the basket has completely coasted down to a stop before the lid unlocks, for safety reasons.

How do I reset my LG washing machine?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

Open the rear door you want to lock. Look at the side of the door (the part that you can’t see when the door is closed). You will likely see one of the following locking devices – usually requiring you to push a lever down or up, or turn your key in a slot to engage the lock.

What is child lock in washing machine?

Child Lock Function. This function allows you to lock the buttons on the panel of washing machine so that the wash cycle you’ve chosen can’t be changed by a child while he/she is playing with it.

How do you unlock a top load washer?

To unlock the lid:
  1. Pausing the machine will allow you to open the lid.
  2. During the spin cycle, pausing the washer does unlock the lid, but you must wait until the basket has completely coasted down to a stop before the lid unlocks, for safety reasons.

How do you unlock a top load washer?

The LG Dryer error code d80 indicates an 80% air blockage. This means the clothes dryer’s air exhaust is not pushing enough air out of the dryer through the venting to the outside of your home or apartment. The d80 error means the dryer is 80% clogged either in the air exhaust hose, wall ducts, or the vent outside.

How do you open the LG Direct Drive washing machine?

To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.

How do you fix a child lock on a door?

How to Fix a Child Safety Door Lock on a Car
  1. Remove the plastic cover around the child lock lever with a flat-head screwdriver, exposing a larger hole to see inside the lock mechanism.
  2. Spray the WD-40 in and around the lock lever, being sure to get the lubricant deep into the child lock mechanism.

How do I unlock my Samsung automatic washing machine?

Water remains in the washer. Until the washing machine drains water completely the door cannot be opened.

Washing Machine: Unlock the Door

  1. Press the Start/Pause button to unlock the door.
  2. Open the door, then add/remove laundry.
  3. After closing the door, press the Start/Pause button to restart the wash.

How do I turn off control lock on my LG dishwasher?

Press and hold Dual Zone for 3 seconds to activate or deactivate this function. The control lock indicator will illuminate on the control panel if the feature is activated. Note: You must deactivate the control lock feature to select new settings. The Control Lock feature does not lock the door.

How do you activate child lock in car?

How to Fix a Child Safety Door Lock on a Car
  1. Remove the plastic cover around the child lock lever with a flat-head screwdriver, exposing a larger hole to see inside the lock mechanism.
  2. Spray the WD-40 in and around the lock lever, being sure to get the lubricant deep into the child lock mechanism.

How do I bypass the lock on my LG washer?

How to Bypass a Washing Machine Lid Lock
  1. Turn off the washer and unplug the appliance.
  2. Locate the retaining tabs and/or screws that hold the top horizontal panel down.
  3. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
  4. Put the lid back down and plug the washing machine back into the electrical outlet.

Why is my LG washer not turning on?

Open the rear door you want to lock. Look at the side of the door (the part that you can’t see when the door is closed). You will likely see one of the following locking devices – usually requiring you to push a lever down or up, or turn your key in a slot to engage the lock.