How to Space Swings on a Swing Set
  1. Place a tape measure at the top bar of the swing set where the chain or rope of one swing is located.
  2. Walk to any tire swings or disc swings that move in a circular motion instead of back and forth.
  3. Locate any lawn swings on the swing set which are swings that contain one child on each side.

Also, Is a swing set worth it?

While wooden swing sets might fall apart into a pile of timber after a few years, our durable vinyl sets will look as new, and be as strong, as the day they were installed. When your play set provides year-after-year of fun, it’s easy to see that it is truly worth the investment. Find out how long a swing set lasts.

In this way, How do you make a 4×4 swing set?

How to Make Your Own Swing Set With 4X4 Lumber
  1. Lay one of the 4x4s on an elevated surface.
  2. Lay two of the 10-foot 4×4’s on the ground to form the top two lines of a triangle.
  3. Using your level and pencil, mark a line on the right piece (the piece lying on top), with the line going from the lowest point of the intersection to the highest.

24 Related Questions Answers Found


How high should a swing set beam be?

The top beam is about 11 feet above the ground. The footprint is about 13 feet by 13 feet.

Free-standing A-Frame Swing Set

  1. Step 1: Step 1: Buy Your Lumber and Hardware.
  2. Step 2: Assemble Tools.
  3. Step 3: Attach Hangers and Brackets to Beam.
  4. Step 4: Raise Beam on Legs.

What is a swing beam?

Swing beams, also known as “bull beams”, are large-depth beams of which there is usually only one in an English-framed barn in a middle bent and extending from wall post to wall post.

How do you make a swing set from scratch?

  1. Mark and Dig Holes. The vertical support beams must be anchored in cement.
  2. Miter Top Ends of Vertical Posts.
  3. Cut and Attach Footers.
  4. Drill Hole Through Crossbeam to Vertical Posts.
  5. Attach Lag Bolts.
  6. Turn Structure Upright and Check for Level.
  7. Pour, Mix and Shovel Cement.
  8. Measure, Mark and Cut Swing Seats.

Is a 4×4 strong enough for a swing set?

Yes, a 4×4 that is 20′ long will work. A 4×4 that is 12′ long will support about 4,000 lbs. each (depending on the species and grade). A 16′ 4×4 will support about half that and a 20′ 4×4 will support almost 1,000 each, if its horizontally braced about half way up.

What angle is a swing set?

Mark the angle you will use for the legs of the swing set. This will typically be 45 degrees but you can adjust this as necessary. Cut the ends of the 4 2 x 6 planks at the angle. Pre-drill holes into each of the 2 x 6 legs and the swing set top.

How do you anchor a frame swing set?

Method 1 Anchoring with Concrete
  1. Position the swing set and mark the location of each leg with a shovel.
  2. Dig holes at each point where you marked the ground with your shovel.
  3. Drill holes into the sides of each leg of the swing set.
  4. Place the plate of a concrete anchor at the bottom side of each leg.

How high should a swing seat be off the ground?

Swing Space

Allow at least 3 to 4 feet of clearance in both the front and back of your swing and at least 2 feet on each side. As for how high to hang your swing, the seat should be approximately 17-19 inches above the floor.

How deep should a swing set post be?

How much weight can a swing set hold?

500 pounds

What can I put under my swing set?

Recommended Materials to Put Under a Swing Set. We recommend putting rubber mats, wood chips, rubber mulch, pea gravel or sand under swing sets.

When should I buy a swing set?

In fact, late fall and early winter can be the best time to buy a swing set. On one hand, you may end up paying the year’s lowest prices when you buy in November or December — but there are a whole host of other reasons to shop swing sets during the off-season.

How do I keep my swing set from sinking?

Place a house brick in the bottom of each post hole with the widest edge facing up. The bricks will prevent the swing set from sinking in the dirt. Set the swing set in place, and hold a level on the top bar of the swing set. Add gravel under each brick to adjust the height as needed.

What kind of wood should I use for a swing set?

The most common woods used for playsets are redwood, cedar, and pine. All wood should be stained and sealed, keeping it structurally sound and looking good for years. Redwood and cedar naturally repel insects and water, making them low-effort choices.

How do you keep grass under a swing set?

Put mulch or pea gravel under jungle gyms and swing sets so you don’t have to worry about bare spots. Make sure to move large or heavy items like corn hole games, kid’s pools, or Slip-n-Slides to a new location every other day to keep them from turning the grass underneath brown.

Here are some pros and cons of the most popular playground ground cover options to help you decide which one is best for you.
  1. Pea Gravel.
  2. Rubber Mulch.
  3. Poured Rubber and Rubber Tiles.
  4. Natural Grass.
  5. Artificial Grass.
  6. Play Sand.
  7. Wood Chips and Mulch.
  8. Engineered Wood Fiber (EWF)

What type of swing set is best?

The 5 Top-Rated Backyard Swing Sets
  • Our Top Pick: Lifetime Monkey Bar Adventure Swing Set.
  • Our Runner Up Pick: Gorilla Playsets Nantucket Swing Set.
  • Best Budget Pick: Step2 Naturally Playful Playhouse Climber & Swing Extension.
  • Best Wooden Play Set: Winchester Wood Complete Play Set.

How do you level a swing set on a sloped yard?

In most cases, the job is easier with the help of one or more assistants.
  1. Determine the best section of the slope for the swing set.
  2. Place the swing set at the area where it installs.
  3. Stand to one side of the swing set.
  4. Outline each of the uphill legs on the slope, using the flat tip of a digging bar.

How much mulch goes under a swing set?

After you build the structure and install swing set anchors, you will need to place shock-absorbing surfacing underneath and on the surrounding areas to cushion the inevitable tumbles that will happen as kids play. Protective material should be at least 9-inches to 12-inches deep, depending on the playset deck height.

How do you make a swing seat?

How to Make a Tree Swing
  1. Step 1: Select a Tree. Find a tree that is healthy and clear of obstructions such as bushes, structures or other trees.
  2. Step 2: Cut the Seat.
  3. Step 3: Shape the Seat.
  4. Step 4: Sand the Seat.
  5. Step 5: Drill Holes for Rope.
  6. Step 6: Paint.
  7. Step 7: Attach Chains.
  8. Step 8: Attach Rope to Anchor Shackles.

What are swing seats made of?

Some swing sets include play items other than swings, such as a rope ladder or sliding pole. For older children, swings are sometimes made of a flexible canvas seat, of a rubberized ventilated tire tread, of plastic, or of wood.

How wide is a porch swing?

For the most part, swing seats come 4 or 5 feet long; they may be contoured or flat. Seat depth varies widely, from 18 to 36 inches. The porch swing Norm built measures 4 feet long and has a seat that is 18 inches deep, dimensions he finds just right.

How wide is a porch swing?

How deep should a swing set post be?

Make each hole 24 inches deep and 12 to 14 inches across. Stand one post into each hole.

Can you put a playset on grass?

It is fairly common to see outdoor playsets plonked directly onto a grass surface, and this is better than them being on a concrete or asphalt surface.