How to Unlock the Controls for a Whirlpool Duet Washer
  1. Locate the “Control Lock/Unlock” button on your Duet’s control panel.
  2. Press and hold the “Control Lock/Unlock” button for three seconds.
  3. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.

Similarly, How do I get the control lock off my washing machine?

Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off. If that does not do it, try putting the machine into diagnostic mode. The washer must be empty and the control must be in the OFF state before pressing the touch-pad sequence to start the test.

Also, How do you reset a Whirlpool washing machine?

  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
  3. The motor has now been reset and is ready for you to start a cycle.

33 Related Questions and Answers Found πŸ’¬

 

Why does my Whirlpool washer say Loc?

If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

How do you reset a Whirlpool front load washer?

Unplug the washer for 30 seconds to attempt to reset the Duet washer control. You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off.

How do I reset my Kenmore Elite washer?

How to Reset a Kenmore Elite HE Washer
  1. Press the “Stop” button twice, and then press the “Power” button.
  2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
  3. Press the “Start” button to complete the reset process and restart the washing machine.

What is tumble dryer Loc?

@divorcedhelp the “LOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time.

How do I reset the door lock on a Whirlpool Duet washer?

Pressing the power button cancels the “Fan Dry” option and unlocks the door. Press the β€œDrain and Spin” button on the washer’s control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the β€œDrain and Spin” cycle completes, the door should unlock.

What is Loc on Maytag dryer?

Control Lock has

How do you manually unlock a Whirlpool front load washer?

How to Unlock a Whirlpool Duet Washing Machine
  1. Reach up inside the front panel and locate the door latch assembly on the right side of door.
  2. Feel for a tear-drop shaped tab on the bottom of the door latch assembly. This tab will manually unlock the door.
  3. Gently pull down on tab about 1/4 inch or until you hear a click. The door should open.

How do I reset my Kenmore Elite washer?

Maytag acknowledges that error codes like “Sd” sometimes appear by mistake. Push the “Pause/Cancel” twice or “Power” button once to remove the code from the screen and try using the washer again. If the code returns, unplug the washer for 60 seconds and try the cycle again before calling for assistance.

What does loc mean on my Maytag washer?

A lock icon appears on the front of the washer’s control panel to indicate the lid is locked and also displays the current progress of the cleaning cycle, depending on the model of your Maytag washer. Once paused, the lid automatically unlocks to allow changes to the current load.

Where is control lock on Whirlpool washer?

How to Unlock the Controls for a Whirlpool Duet Washer
  1. Locate the “Control Lock/Unlock” button on your Duet’s control panel.
  2. Press and hold the “Control Lock/Unlock” button for three seconds.
  3. Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.

Can you reset a Maytag dishwasher?

To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.

Why does my dryer say Loc?

The “LOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. where it covers your dryer’s features and the “Control Lock”.

How do I bypass the lid lock on a Whirlpool washer?

Why is my candy tumble dryer Loc?

TheLOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. where it covers your dryer’s features and the “Control Lock”. This may be the issue.

What does loc mean on Kenmore washer?

Control Lock

What is control lock on washer?

The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. Children cannot accidentally start the washer by touching pads with this option selected. To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds.

How do I turn off control lock?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.

How do I turn off the control lock on my Maytag washer?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds (press the words “Control Lock).

How do you bypass a washing machine door lock?

How to Bypass a Washing Machine Lid Lock
  1. Turn off the washer and unplug the appliance.
  2. Locate the retaining tabs and/or screws that hold the top horizontal panel down.
  3. Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
  4. Put the lid back down and plug the washing machine back into the electrical outlet.

How do I reset my Kenmore Elite washer?

How to Reset a Maytag Washer
  1. Press the “Power/Cancel” button.
  2. Push the appropriate button to choose a new cycle.
  3. Press “Start/Pause.” You have now reset your Maytag washer.

What does the code f21 mean on a Maytag washer?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

What does loc mean on Kenmore washer?

Control Lock

What does loc mean on Whirlpool oven?

control panel is locked

What does loc mean on Whirlpool oven?

How to Reset a Kenmore Elite HE Washer
  1. Press the “Stop” button twice, and then press the “Power” button.
  2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
  3. Press the “Start” button to complete the reset process and restart the washing machine.

How do you unlock a Frigidaire washing machine?

To complete the Frigidaire front load washer door latch bypass can be quickly done by pressing the control lock button for five seconds. This should disable the lock. Push the start/pause button to stop the current wash cycle. You should now be able to pry the washer’s door open to add clothes or remove items.

How does a washing machine door lock work?

When you shut the door, the latch on the door pushes inside the door lock onto a sliding bar which moves over and activates an electrical part inside which locks the door shut. At the same time, power is passed through the interlock on to the rest of the machine.

How do you reset a front load washer?

Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds. Plug the washer back in, or turn the circuit breaker back on.

How do you unlock a Maytag 3000 washer?

Manually Unlocking the Door Lock System
  1. Unplug washer or disconnect power.
  2. Remove the lower kick panel.
  3. Reach up along the inside of the front and. locate the bottom of the door switch/lock.
  4. Located on the bottom of the door switch/
  5. Gently pull the tab down about a 1/4˝ or.
  6. The door may be opened.

How do you reset a front load washer?

When you shut the door, the latch on the door pushes inside the door lock onto a sliding bar which moves over and activates an electrical part inside which locks the door shut. At the same time, power is passed through the interlock on to the rest of the machine.

How do you fix LF error on Maytag washer?

LF in the display

Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

What does f01 mean on a Maytag washing machine?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.