How to Hang Christmas Lights on Vinyl Siding
  1. Measure the distance of the light string path to determine the number of hooks you need to use.
  2. Install the hooks, following product directions, along the desired path of the light string.
  3. Hang the light strings on the hooks.
  4. Plug the light string into an outdoor-rated power source.

Similarly, How do you attach Christmas lights to gutters?

Attach your first light clip beside the extension cord to the edge of the gutter. Keep your light string fairly taut as you continue to clip each bulb across your gutter. You will need to reposition the ladder as you go so be sure not to overextend yourself or shift your balance away from your ladder.

Also, How do I secure my roof decorations for Christmas?

How to Mount Christmas Decorations on a Roof
  1. Look at the base of the Christmas decoration.
  2. Drill 2- or 3-inch screws, depending on the thickness of the display, through the decoration and into the wood.
  3. Screw eye bolts into the ends of the wood boards.
  4. Feed wires through the eye bolts.

35 Related Questions and Answers Found ?


What tape sticks to vinyl siding?

Gorilla tape sticks to smooth, rough and uneven surfaces, including wood, stone, stucco, brick, metal and vinyl.

How do you hang string lights on a tree?

Here’s how to use trees for hanging outdoor lights:
  1. Step 1: Measure the space from tree to tree where you want to hang the lights.
  2. Step 2: Drill guide holes in the trees where you want to hang the lights on each side.
  3. Step 3: Install a safety hook into both trees at the marked spots.

How do you hang outdoor string lights on vinyl siding?

How to Hang Christmas Lights on Vinyl Siding
  1. Measure the distance of the light string path to determine the number of hooks you need to use.
  2. Install the hooks, following product directions, along the desired path of the light string.
  3. Hang the light strings on the hooks.
  4. Plug the light string into an outdoor-rated power source.

Can you use screws on vinyl siding?

Fastener Choices

Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. When the fastener must penetrate through a non-nailable material such as foam sheathing, the thickness of that material does not count toward the total.

How do you anchor string lights?

How to Hang String Lights
  1. Step 1: Install the tension wire. We made a loop on one end of the wire using wire clamps and attached the loop to our anchor point, the pergola roof, using a screw hook.
  2. Step 2: Secure first end of strand lights to first anchor point.
  3. Step 3: Hang string lights from wire.

Can you drill into vinyl siding?

When drilling through vinyl siding, it is important to know what is underneath. This will determine just the type of bit that will be needed to drill through the vinyl siding. No matter what size hole is needed, drilling through vinyl siding can be accomplished in just a few minutes with the proper tools.

How do you hang heavy duty string lights?

How to hang outdoor string lights on a deck or pergola:
  1. Measure the space to determine how many lights you will need.
  2. Screw the Screw Eye hooks into place.
  3. Connect the molded loop to the screw hook using a D-ring clip.
  4. Screw the bulbs into place and you’re done!

What kind of nails do you use to hang vinyl siding? Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8″ and a nail head of 3/8″ or larger. The nails should penetrate 3/4″ into a solid wood base.

How do you hold fairy lights up?

Use nails, thumb tacks, or wall hooks to secure the lights to the perimeter of your desired wall. Secure the lights to the side and top edges of the entire wall; leave the bottom edge along the floor empty. This works best with string lights that have to be connected to an outlet.

Are there Command hooks for outside?

Using a new formulation of the revolutionary Command Adhesive, these Outdoor Hooks are specially designed to hold strongly outdoors-they are water resistant, UV resistant and can handle temperature extremes from -20-degree F to 125-degree F. And like all Command Products, they remove cleanly-with no marks or sticky

How long do command strips last?

Leave for at least one hour before rehanging/reattaching. Q: How long will Command™ products stay up for? A: Command™ adhesive is designed to stay in place for as long as you need it to, and will stay put for many years. Therefore Command™ Hooks and be used as temporary or permanent hanging solutions.

What does a red porch light mean?

Means they have a red lamp inserted in their porch light fixture. Red light allows vision without destroying your night vision.

How do you hang string lights on a patio?

How are house numbers attached to vinyl siding?

Drive the screws through the mounting holes in the numbers. If attaching to metal or vinyl siding, you may need longer screws to reach a solid substrate. First mounting the numbers to a wood or acrylic plaque and then mounting to the siding with 2- or 3-inch screws might be helpful.

How do you hang string lights on a patio?

Hanging Patio String Lights Basic Steps
  1. Draw a rough sketch with measurements.
  2. Assemble your poles if applicable.
  3. If using guy wire, hang this first.
  4. Hang your first patio light string with the male plug closest to your outlet.
  5. Use zip ties or hooks between each bulb as needed on deck railings or other structures.

Are fairy lights tacky?

Fairy lights are the bread and butter of Christmas decorating: the atmosphere-creating, life-giving backdrop. But they can just as easily be tacky and headache-inspiring as they are magical and sophisticated.

How do you hang things on a concrete wall without drilling holes?

Hardwall hangers are picture hooks intended specifically for difficult surfaces like concrete block and brick walls. The plastic hook attaches to the wall with small metal nails that pound into the wall surface with a hammer.

How can I hang a ceiling light without drilling?

Using command hooks will prevent any holes or drilling in your walls. Use a command hook to hang the light fixture from the ceiling. And then swag the cord to the wall and secure in place with another command hook. Be sure to use the command hooks for the weight of your light.

How do you hang tile without drilling?

Easy ways to fix bathroom accessories to tiles without drilling
  1. Towel rails & toilet roll holders. If you’re trying to mount a towel rail or toilet roll holder to a tiled wall, put down your drill and stick it on with FIX-PRO® Indoor Mounting Tape instead.
  2. Mirrors. Now to tackle mirrors!
  3. Bathroom hooks.

Mounting on Brick

If your grout is recessed, meaning the bricks poke slightly out over the grout line, you can use brick clamps to hang things on the wall. Snap the clip (sometimes called a “clamp”) right onto the brick face and that’s it; the hook is part of the device.

How do you hang something heavy on vinyl siding?

How do you decorate with string lights?

String lights can cast a lovely warm glow in a dark corner or stand in as a candle replacement.

Decorate with string lights to draw attention upwards

  1. Add a decorative element to your ceiling.
  2. Cast a soft glow over your dining table.
  3. Recreate a starry-night look.
  4. Accentuate a ceiling’s slope or architectural detail.

How do you hang fairy lights without damaging the wall?

How to hang fairy lights without nails
  1. Drawing Pins. Probably the default option for many people, drawing pins (we find that brass drawing pins are often best) can be pushed between the twisted wires that often make up fairy lights, as indicated in the image below.
  2. Blu-Tack.
  3. Wrapping around household objects.
  4. Wire Suckers.
  5. Damage-free Adhesive Hooks.

How do you hang fairy lights without damaging the wall?

Is it OK to screw into vinyl siding?

Vinyl coated screws are great too. In most cases you can purchase these in rather small quantities. No matter which screw you buy, make sure it is a Phillips head screw because they are the easiest to use. Obviously, you want to be safe when climbing ladders to drill into the siding.

How do you hang things on the outside wall?

  1. Hold the decorative item against the wall and use the pencil to trace inside the holes for the mounting screws.
  2. Drill through the center of each traced hole with the masonry bit.
  3. Fill each hole will silicone caulk.
  4. Hang the item with corrosion-resistant screws driven into the anchors.

How do you get command strips off without chipping paint?

A Piece of Floss and a Hairdryer will do the Trick

First, warm up the adhesive with a hairdryer. 30 seconds or so seems to be about right. Next, use dental floss or fishing line to gently cut through the adhesive strip. Rub off any remaining adhesive residue, and the Command Hook is ready to reuse!

How do I attach a trellis to a wall without drilling?