1. Sweep or brush off the cedar area completely with your broom, removing any large debris and any dirt that can be brushed off easily.
  2. Mix the exterior wood wash, according to package directions, with water in the large bucket.
  3. Clean off the wood wash mixture using a power washer or garden hose.
  4. Dry the cedar.

Then, Can you clear coat cedar?

Cedar-Seal dries clear and maintains the wood’s oil content for years to come. Cedar-Seal may be applied before water based stains or before painting with any water based paint product. Natural “greying will occur if used as a stand-alone coating without the use of pigments. Wear areas not covered in Warranty.

Considering this, How do you protect outdoor cedar wood?

Paints
  1. On bare new or restored cedar, apply one coat only of water-repellent preservative (1% or less of wax by volume and content).
  2. Apply a good quality stain-blocking primer as soon as possible after the water-repellent has dried.
  3. Apply the top coat over the primer.

29 Related Questions and Answers Found 💬

 

What is the best finish for a deck?

In general, oil-based finishes penetrate wood better than water-based finishes do, and they are easier to recoat. However, they carry the trade-offs of higher VOCs and a cleanup process that requires solvents. Deck finishes break down into three groups: oil-based, water-based, and hybrid.

Does white cedar need to be sealed?

White Cedar contains natural oils that help fight off rot and insects. Because of this natural resistance to decay, this type of wood is a preferred choice for many outdoor projects. Whenever using this type of wood for outdoor projects, it’s important to seal it for maximum protection and durability.

Why does my deck turn GREY?

Sunlight. Radiation from the sun’s ultraviolet rays breaks down the lignin in the cellulose causing photo chemical degradation, and it occurs in any wood exposed to sunlight. The result is a change in the wood’s appearance from it’s original color to a gradual silvery gray sheen.

How do you keep Cypress from turning GREY?

If left untreated, however, cypress lumber fades to a silvery grey color within a few years. The regular application of a an exterior varnish, also known as urethane, or other clear sealant will preserve the beautiful natural color of cypress wood in outdoor applications.

Do you need to waterproof cedar?

Cedar typically needs to be retreated every two years, but this can be extended with multiple waterproofing coats. For maximum lifetime, apply as many coats of waterproofing as the cedar will absorb. If you plan to paint the cedar after waterproofing, do not treat with more than one coat.

How long does it take for pressure treated wood to turn gray?

If you decide to wait three to six months before staining your deck, most unstained pressure treated lumber will begin to turn gray. The wood may also become discolored from foot traffic, wet leaves or spilled food.

What is the best deck sealer?

The Top 8 Best Deck Sealers for 2020 are:
  • DEFY Extreme Semi-Transparent Exterior Wood Stain.
  • Thompson’s WaterSeal Advanced Natural Wood Protector.
  • #1 Deck Premium Semi-Transparent Wood Stain.
  • Tall Earth Eco-Safe Wood Treatment.
  • DeckWise Ipe Oil Hardwood Deck Finish.
  • Ready Seal Natural Cedar Exterior Wood Stain and Sealer.

How long do cedar decks last?

Go over the surface with a clean paintbrush and cedar wood oil. Wood oil is best used on cedar in its natural state. The wood oil will add to the health of cedar wood and seal the top layer to protect it. Cedar wood oil is especially good for outdoor cedar furniture.

Should Cedar be stained?

Cedar should be stained as soon as it will accept the stain. This is easy to determine with penetrating semi-transparent stains. Apply the stain, if it soaks in its ready. If it pools on the surface, do it later.

What is the best finish for a cedar deck?

The best wood stains for new cedar are deep penetrating paraffinic oil-based stains that are thinner in viscosity. Stains for new cedar wood should dive deep into the wood to condition the wood cells and provide protection from UV fading and moisture damage.

How often should I stain my cedar deck?

You can stain a new deck with a solid stain and therefore restain less often, but then you are covering up the natural beauty of the decking. On average, a transparent stain will need to be restained every year, while a solid pigment stain will need to be restained every five years.

How long do you have to wait to stain cedar?

2-3 month

How do I keep my cedar deck from turning GREY?

When should you seal a new deck?

The wood on a new deck needs to dry thoroughly before sealing or staining. If the wood came still wet with preservative, allow it to dry about 30 days before applying stain or sealer.

How often should you treat decking?

Hardwood decks needs to be treated every year. They tend to turn into a silver or grey colour in time, but by treating it every year you are protecting it from the UV rays. When treating your Hardwood deck oils work better.To treat the timber oil is rubbed on with a cloth.

Can cedar be left untreated?

If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color. However, even with the proper maintenance, cedar will eventually succumb to fading—usually after about 10 years—and lose its natural tone for good.

Can you use Thompson Water Seal on Cedar?

Overview. Apply the Thompson’s WaterSeal 1 gal. Natural Cedar Waterproofer Plus Tinted Wood Protector to your deck or wood furniture to provide a reliable waterproof seal. This water proofer is resistant to UV rays and mildew growth to help maintain the wood’s natural beauty and durability.

Should I stain or seal my deck?

Surfaces such as decks, wood siding, fences, and so on need a protective coating to keep from weathering so fast. A deck sealer is typically a clear or transparent finish that either penetrates into the wood or forms a clear film on top. A deck stain has the same water-resistant qualities that a deck sealer does.

Should cedar decking be sealed?

If you are looking to preserve the beautiful rich grain of, say, a mahogany or cedar decking, we recommend sealing the deck with a translucent penetrating stain within 1-2 weeks of construction. This will ensure minimal or no UV damage and give your deck that natural look.

How long do cedar decks last?

If your cedar deck is newly installed, you‘ll need to sand* the cedar boards prior to staining. The boards go through a planing process at the mill that result in “mill glazing”. The planing process causes an oily surface on the boards that can hinder the wood stain from penetrating the wood.

Can you clear coat cedar?

It won’t last for more than a few years.

On average, decks need to be stained again every other year. A quality, professional paint job will last longer than a quality, professional deck staining. However, an oil-based semitransparent stain can last for three to five years.

How often should you stain your deck?

Most pros recommend you restain a horizontal surface every two to three years. That said, properly preparing, cleaning and drying the surface before applying a stain will yield the best results for the stain to last at least that long. You want to make sure there are no traces of sealant present on the deck.

When Should I seal my deck?

The wood on a new deck needs to dry thoroughly before sealing or staining. If the wood came still wet with preservative, allow it to dry about 30 days before applying stain or sealer. To test the wood to see if it’s dry enough to stain or seal: Pour a little water on the wood.

When Should I seal my deck?

15-20 years

Can I leave my deck untreated?

It is highly unlikely that the deck will rot, splinter or decay if you choose not to have it finished and you can always choose to stain and protect the deck at a later date.

Is it necessary to seal pressure treated wood?

However, most pressuretreated wood should have periodic sealing against moisture, preferably every year or so. Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water.

Can I leave my cedar deck untreated?

Cedar naturally resists moisture and repels insects, so most cedar decking is left untreated. People who prefer treated cedar want to make sure their decks stay in good condition for years. (With the proper maintenance, even untreated cedar decks can last just as long.)

Do I need to seal cedar?

Cedar accepts paint, but more than any other wood except pine, it needs a coat of primer before you paint it. The natural oils in cedar can bleed through latex and oil paints and produce dark areas around knots and oil-rich sap lines. To prevent this, use a high-solid primer before you paint it.

How long will a deck last without stain?

However, most pressuretreated wood should have periodic sealing against moisture, preferably every year or so. Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water.

What is the best deck sealer?

Here are some of the best deck sealers on the market:
  • Thompsons Waterseal Advanced Natural Wood Protector.
  • ECO-SAFE Wood Treatment – Stain & Preservation by Tall Earth.
  • Rust-Oleum Coppercoat Wood Preservative.
  • CabotStain Australian Timber Oil Penetrating Oil.
  • Thompsons Waterseal – Transparent Stain.

How do I treat cedar wood for outdoor use?

It won’t last for more than a few years.

On average, decks need to be stained again every other year. A quality, professional paint job will last longer than a quality, professional deck staining. However, an oil-based semitransparent stain can last for three to five years.