How to Sew a Zippered Pillow Cover
  1. Step 1: What You’ll Need:
  2. Step 2: Mark and Cut Your Fabric.
  3. Step 3: Sew Across the Edge Where You Want Your Zipper.
  4. Step 4: Placing the Zipper Into the Seam.
  5. Step 5: Sew the Zipper Ends.
  6. Step 6: Sew in the Zipper.
  7. Step 7: Rip Open the Seam to Expose the Zipper.
  8. Step 8: Finish the Zipper.

Also, How much bigger should a pillowcase be than the pillow?

Opt for a pillowcase measuring 1/2 to 1 inch longer than the pillow length and 2 1/2 to 4 inches wider than the pillow width, if you’re buying a ready-made pillowcase.

In this way, What is the standard size of a cushion cover? Common cushion sizes. Traditionally the most common size and shape for a cushion was the square, and this is available in sizes from 30cm x 30cm (12inch x 12inch), 40cm x 40cm (16inch x x16 inch), 45cm x 45cm (18inch x 18inch) and 60cm x 60cm (24inch x 24inch).


36 Related Questions Answers Found

 

How do you make cushion covers step by step?

Steps
  1. Purchase fabric for your cushion cover.
  2. Wash your fabric if it is made of a natural fiber like cotton.
  3. Iron the fabric.
  4. Cut your fabric to size.
  5. Sew both short ends of the fabric.
  6. Sew the long sides of your cushion cover.
  7. Turn your cushion cover right-side out.
  8. Insert your cushion into your new cushion cover.

How do I calculate how much fabric I need?

Figure out how much fabric you need with this formula:
  1. Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).
  2. Total number of pieces divided by number of pieces that fit into width equals number of rows you need.

How much material do I need for a cushion cover?

For a cushion inner 45cm x 45cm, the actual size of the cushion cover should be around 42.5cm x 42.5cm. One metre of standard width (137cm) furnishing fabric is enough for three plain cushions with either zip or standard button fastening to fit up to 45cm x 45cm size. Other styles of cushion will need more fabric.

What size should cushion cover be?

20×20

How many yards do I need for a cushion?

One piece of fabric 54 inches wide and 16 1/2 inches long produces two cushion pieces. If you need more cushion pieces, multiply the number of sets by the cut length. For example, if you need eight cushion pieces, multiply the cut length of 16 1/2 by 4 and divide by 36 for the number of yards of fabric.

How do you measure upholstery?

How to Measure Fabric for Sofa Upholstering
  1. Measure the width of the back of the sofa at the widest point.
  2. Measure the height of the back of the sofa from the lowest point of the upholstery to the highest point on the back of the sofa.
  3. Measure the depth of the sofa by measuring the widest point of the side.

How do you make cushion covers step by step?

Step by step
  1. Cut a square of paper the same size as your cushion pad.
  2. Iron your fabric thoroughly before you cut it to get rid of any creases.
  3. Take a good look at the fabric’s pattern and choose a section you like for the front of the cushion.
  4. Pin the other pieces of paper to your fabric and cut around them.

How do you measure a cushion?

How much fabric do I need to cover my outdoor cushions?

It took me almost eight yards to cover all the cushions. That includes a total of eight cushions. That’s approximately one yard (54โ€ณ wide) per cushion, but I was able to cut two side-by-side in my fabric.

How do you wash camper cushions?

All you need to clean them and get them smelling fresh is baking soda, vinegar, a spray bottle, and some sunshine. Simply take the cushion covers off the of the foam and wash those according to the directions. Lay the foam cushions on the driveway or yard on top of an old sheet or blanket.

How much is a yard of fabric?

Measuring a Yard of Fabric

The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That’s precisely how much a yard of fabric is. The bolt is the part that holds the material together, and no matter how wide the fabric is, the yard is 36 inches measured off the selvage edge.

How much bigger should a cushion cover be than the cushion?

We recommend: for square cushion covers you use an insert that is about 5-6cm or 2″ bigger than the cover. for rectangular (lumber) cushions you use an insert that is 2-3cm or 1″ larger than the cover.

How much does it cost to make a pillow?

In addition to materials, you can expect to pay anywhere from $15 to $50 per pillow for labor, depending on the size and design. It’s important to be clear up front about your needs, payment terms, and time frame. Some sewers will ask for a deposit to start the project.

How can I cover my couch cushions without sewing?

How to Recover Couch and Chair Cushions Without Much Sewing
  1. Measure the width, length and depth for the couch and/or chair cushions.
  2. Use a measuring tape to determine measurements for a couch cushion.
  3. Use a bit different approach for the chair.
  4. Remove the current fabric from the cushion, exposing the foam cushion.
  5. Cut fabric to create the sides of the cushion.

How much fabric do I need for a bench cushion?

How much fabric do I need for a bench cushion?

How much fabric do I need for piping?

This means to make the required length of piping 2 bias strips of fabric must be cut. To determine the amount of fabric yardage needed divide the number of strips needed by the strip width measurement. In this case 2 strips รท 2″ width = 1 yard.

How Are sofa cushions measured?

How to Measure Your Sofa
  1. Step 1: Dimensions. Back Height: Measure the back height of your sofa from bottom to top. Seat Depth: Measure the depth of your sofa from front to back.
  2. Step 2: Thickness. Decide the cushion thickness you would like. Sofa cushions are available 4-8 inches thick (in 1-inch increments).

How do I figure out how many yards of fabric I need for a cushion?

One piece of fabric 54 inches wide and 16 1/2 inches long produces two cushion pieces. If you need more cushion pieces, multiply the number of sets by the cut length. For example, if you need eight cushion pieces, multiply the cut length of 16 1/2 by 4 and divide by 36 for the number of yards of fabric.

What is a pillow form?

Throw Pillow Inserts and Pillow Forms. Also referred to as pillow forms, all our polyfill inserts are made from 100% new material and are hypoallergenic. For a firmer, plumper pillow we recommend buying a pillow insert one size larger than the pillow cover (for example, an 18″x18″ insert in a 17″x17″ cover).

How do you measure cushion fabric?

Fabric Repeat

5โ€ณ + 9โ€ณ equals 14โ€ณ, thus you will multiply your adusted length of 74โ€ณ by 1.1 for a total of 81.4โ€ณ. Divide 81.4โ€ณ by 36โ€ณ for a total of 2.26 yards. Multiply 2.26 yards by 3 cushions, equaling 6.78 yards. Now multiply your adusted length of 37โ€ณ by 1.1 for a total of 40.7โ€ณ.

What size is a scatter cushion?

Feather and down are breathable and absorb moisture, keeping your scatter cushions, couch or bed dry. The best quality scatters cushions contain 80% feathers and 20% down.

Additional information.

Weight N/A
Size 60 x 60cm, King 50 x 90cm, Standard 45 x 70cm

What size is a scatter cushion?

A standard seam allowance is 1.5 cm or 5/8″, which is how much we used. If it makes math easier, you can make a 1/2″ seam allowance. Just make sure to add this measurement onto both sides of each piece you cut out. For the size of cushion we were making, we needed 1 1/4 yards of 60″ width upholstery fabric.

How are cushion pads measured?

To measure a cushion cover, remove the cushion pad inside, lay the cover flat, then, in the case of a square or rectangular cushion, measure along the length and width of the cover. For round cushion covers, measure across from one side to the other to find the diameter.

What fabric is used for cushion covers?

Things like polyester and nylon are widely used in the manufacture of cushion covers. Most synthetic materials are a combination of various fibres and can imitate anything from silk to wool.

What size is a large cushion?

The most common sizes of cushions for sofas are 18″x18″ and 20″20″. However, larger sofas with deep seats or high backs, may suit 22″x22″ or even 24″x24″ cushions. We also sell jumbo sizes which can be used for a variety of purposes, and they measure 28inches x 28inches upto 30inches x 30 inches.

Should a cushion cover be smaller than the cushion?

Expert tip: always choose a cushion pad that’s the same size or one size bigger than your cushion cover to ensure extra plumpness and comfort. Never go for a cushion pad smaller than your cover as you’ll end up with empty corners where there’s no filling โ€“ overstuffed looks and feels much better.

Things like polyester and nylon are widely used in the manufacture of cushion covers. Most synthetic materials are a combination of various fibres and can imitate anything from silk to wool.