How to Remove a Kwikset Laurel Door Knob
  1. Loosen the outer ring. Locate the depression or lip along the perimeter of the outer ring.
  2. Grab the knob handles on both sides of the door and simultaneously turn both handles clockwise. Release the handles.
  3. Loosen both screws on the inside of the knob mechanism.
  4. Unscrew the latch from the side of the door.

Also, Is it cheaper to rekey or replace locks?

Due to the extremely low price of the key pins in the locks, rekeying is almost always much cheaper than getting your locks changed. For example, if your home has several locks and each lock has a different key, which can be inconvenient, you may want to rekey the locks to all match the same key.

In this way, Can I rekey my own locks? You can re-key a lock like a pro and at a fraction of the cost, with something like a Schlage rekey kit. Re-keying kits are available for most lock brands, like a Schlage or a Kwikset rekey kit, but they’re not interchangeable. But keep your current keys—you’ll need them to remove the cylinder.

21 Related Questions Answers Found


How do you remove a door knob with hidden screws?

VIDEO: How to Remove a Doorknob with No Visible Screws
  1. There should be a small latch near the base of the knob or handle, probably on the exterior side of the door.
  2. Push this latch in, and pull the handle off the door.
  3. Next, find a small slot on the edge of the trim piece. Insert the tip of a screwdriver and pry off the trim piece.

Will Home Depot rekey locks to match?

In most cases your local Home Depot can rekey new locks to match your old key. If you own a different brand lock you may still be able to have the new locks rekeyed by taking them to a locksmith, who can change the cylinders in the new locks to match those in the old locks.

How do you remove a Kwikset door knob with hidden screws?

How to Remove a Kwikset Door Knob
  1. Open the door so that you have access to front and back of the door you are removing the Kwikset door knob from.
  2. Simultaneously pull both sides of the door knob away from and off the door.
  3. Remove the screws that secure the latch plate to the edge of the door using the Phillips-head screwdriver.

How do you remove a locked exterior door knob?

How to Remove a Locked Doorknob
  1. Step 1: Examine the Shank. Examine the shank of the doorknob.
  2. Step 2: Insert an Object. Insert a tool into the hole or slot.
  3. Step 3: Push and Pull. Push on the tool.
  4. Step 4: Twist If It Resists. Twist the tool if the doorknob resists your efforts.
  5. Step 5: Remove the Rose.
  6. Step 6: Unscrew and Finish.

How do you fix a door that won’t lock?

A homeowner with basic DIY skills and tools can fix a door that won’t latch.
  1. Open the door. Examine the striker plate.
  2. Shut the door and try to lock it. If it won’t lock open the door.
  3. Remove the nails from the door stop using diagonal pliers. You can reuse the nails.

How do you remove a Weiser deadbolt from a door?

  1. Stand on the inside of the door with the Weiser lock and turn the handle to the left to set it in the open position.
  2. Open the door a few inches to move the door away from the jamb.
  3. Unscrew the screws on the rear of the Weiser lock with a screwdriver or power drill and attached screwdriver bit.

How long does it take to rekey a lock?

about 10-15 minutes

How much does it cost to change a lock?

How do you unstick a lock?

Just gently squeeze a very small amount of graphite powder into the keyhole, and then use your key to slowly work the lubricant into the lock. Another way to do it is to coat your key with the graphite powder first, and then simply insert it into the lock.

How do I remove a door lock?

Removing a Mortise Lock
  1. Step 1: Locate & Unscrew the Set Screw. This screw will be on the shank of the inside knob (the one you use to lock the door).
  2. Step 2: Unscrew the Door Handles.
  3. Step 4: Remove the Rose Plates.
  4. Step 5: Remove the Face Plate.
  5. Step 6: Remove the Mortise Lock.
  6. Step 7: Filling this Hole.

Can you rekey a lock without the original key?

When you do not have keys for the lock as you have lost it or broke it, you need to rekey the lock. The locksmith can rekey your locks only if it can be done without the existing key. But the cost of rekeying of the lock without the original key can be quite expensive in nature.

What does rekeying a lock mean?

Rekeying locks

In rekeying a lock, the locksmith removes the pins and springs in the lock cylinder and replaces them with new pins and springs that work with a new and different key. Key control simply means accounting for all keys made to operate the locks. Once keys are loaned out, key control is lost.

How do you unlock a deadbolt from the outside without a key?

Pick the Lock Using Bobby Pins

One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed “looped” side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.

How do you remove a door lever without screws or latch?

To remove a door handle without any visible screws, start by prying off the cover plate by inserting a flathead screwdriver in the notch on the side of the plate. If you don’t see a notch and the cover plate is round, try turning the plate counterclockwise to remove it.