How do I reset the Cricut Imagine machine?
  1. Power off the Cricut Imagine machine.
  2. Hold down the button below Menu, the button directly above Menu, and power all at the same time.
  3. Hold them until a rainbow screen appears, then release the buttons.
  4. Follow the on-screen prompts to calibrate the screen and complete the reset.

Also, How do I reset my Cricut Air 2?

You can perform a Hard Reset on the Cricut Expression 2 by following the steps below: Power off the Expression 2 machine. Hold down the magnifying glass, pause, and power buttons all at the same time. Hold until the machine gives a rainbow screen; then release the buttons.

In this way, How do I troubleshoot my Cricut?

Troubleshooting
  1. Cricut Maker: Blade not detected.
  2. Power button is Blinking Red.
  3. Power button is Solid Red.
  4. Cricut machine does not cut through my material.
  5. My machine is tearing or dragging through my material.
  6. My machine is making an unusual noise.
  7. I’m getting an error that the machine cannot read the cut sensor marks.

34 Related Questions Answers Found

 

How long is the Cricut warranty?

A warranty period of 90 days on all Cricut® branded image or font cartridges. for warranty service (refer to page 2 for instructions about shipping to PROVO CRAFT). A warranty period of 90 days on all Cricut® branded image or font cartridges.

How do I contact Cricut?

Our Member Care team is available Monday to Saturday to help you. You can also leave us a message anytime and we’ll get back to you as quickly as possible.

Call us.

Country Toll-Free Number Support Languages
Other* (+1) 801 937 9075 English

How do you clean a Cricut mat?

Knife Blade: Cleaning the cutting mat
  1. Keep the mat flat supported by a firm surface, and place in the sink.
  2. Run lukewarm water over the mat. Use a plastic, hard-bristled brush to gently scrub in a circular motion until the entire surface of the mat had been cleaned.
  3. Pat dry with a paper towel.
  4. Let mat air dry completely for stickiness to return.

Is Cricut maker dual voltage?

Power requirements for Cricuts

All models of the Cricut (from the Personal right up to the Maker) are dual voltage. That means that if you purchase one direct from the US you won’t need a transformer to use it.

How do I reset my Cricut explore AIR 2?

You can perform a Hard Reset on the Cricut Expression 2 by following the steps below: Power off the Expression 2 machine. Hold down the magnifying glass, pause, and power buttons all at the same time. Step 2 Connect your Cricut Explore® machine to your computer using the USB.

How do you turn on a Cricut?

Plug your Cricut™ machine into a grounded electrical outlet, and turn it on by pressing the On button to the right of the machine door. The doors of the machine will open when the On button is pressed. If the doors do not open, use gentle pressure to open the Cricut™ machine’s door completely.

How do you clean a Cricut mat?

Knife Blade: Cleaning the cutting mat
  1. Keep the mat flat supported by a firm surface, and place in the sink.
  2. Run lukewarm water over the mat. Use a plastic, hard-bristled brush to gently scrub in a circular motion until the entire surface of the mat had been cleaned.
  3. Pat dry with a paper towel.
  4. Let mat air dry completely for stickiness to return.

Does the Cricut explore AIR 2 have a light?

How do you clean the sensor light on a Cricut?

Cut Sensor Light:
  1. Verify that the cut sensor light is clean.
  2. To clean the cut sensor light on your Cricut Explore or Maker machine, sweep gently with a small, dry watercolor paintbrush.

Why won’t my Cricut maker connect to my computer?

Make sure your Bluetooth is turned on, or connect the USB cable. Make sure that Bluetooth is toggled On -> click Add Bluetooth or other device. Select Bluetooth and wait for your PC to recognize the Cricut machine. Select the machine -> enter the PIN 0000 -> select Connect.

How do you clean the sensor light on a Cricut?

Cut Sensor Light:
  1. Verify that the cut sensor light is clean.
  2. To clean the cut sensor light on your Cricut Explore or Maker machine, sweep gently with a small, dry watercolor paintbrush.

How do I update Cricut design space?

Log in to your account and select “Update Firmware” from the Account menu in the upper left corner. Ensure that your machine is powered on and connected to the computer with the USB cable. Click “Update Firmware” in the firmware update window to start the process again.

Is Cricut dual voltage?

All models of the Cricut (from the Personal right up to the Maker) are dual voltage. That means that if you purchase one direct from the US you won’t need a transformer to use it.

What software do I need for Cricut?

SCAL is the only Cricut design software that includes freestyle drawing tools. And even better, SCAL is compatible with both Mac and Windows. Pro: Make The Cut can convert raster images to vectors for cutting, and it includes quick lattice tools.

How do I reboot my Cricut maker?

The error says “The project was created using an incompatible template and cannot be cut/printed on this machine”. The most likely reason for this error is that you are trying to cut/print to a Cricut that has a different size mat than the one you created your design on.

How do I reboot my Cricut maker?

To download the Cricut Design Space for Android, follow the steps below.
  1. Tap on the Google Play Store icon on your device home screen to open the Play Store.
  2. Search for Cricut Design Space.
  3. Tap the Install button to download and install the app.

How much is a Cricut machine?

Cricut Explore Air Wireless Cutting Machine
List Price: $299.99
Price: $239.99 & FREE Shipping
You Save: $60.00 (20%)

Why will my Cricut not connect to my phone?

Machine Communication Error

Open your phone Settings, and unpair your Cricut machine from your mobile device. Re-pair your Cricut machine to your mobile device. Launch the Cricut Design Space app. Attempt to complete your project again.

How do I calibrate my Cricut air?

Cricut Maker: Knife Blade calibration
  1. Select the account menu, then Calibration.
  2. Select Knife Blade.
  3. Insert your Knife Blade and place a sheet of plain printer paper onto your machine mat.
  4. From the drop-down menu, select your machine (double-check to be sure the correct machine is displayed).
  5. Press the flashing Go button to begin calibration.

How do I troubleshoot my Cricut design space?

Design Space plugin loop troubleshooting
  1. Step 1 – Adding Host Entry. Select your platform below and follow the steps:
  2. Step 2 – Clear Browser Data. Click here for instructions on clearing your browser history, cache, and cookies.
  3. Step 3 – Update Internet Browser.
  4. Step 4 – Check Internet Speeds.
  5. Step 5 – Verify Browser Communication.

If the power button is steady/solid red and no other buttons are lit, this indicates it’s a power related issue. We recommend trying another outlet or power strip. A lot of times it may not be getting enough power to run the machine fully but is able to turn the lights on.

What does it mean project incompatible on Cricut?

The error says “The project was created using an incompatible template and cannot be cut/printed on this machine”. The most likely reason for this error is that you are trying to cut/print to a Cricut that has a different size mat than the one you created your design on.

How long is the Cricut warranty?

A warranty period of 90 days on all Cricut® branded image or font cartridges.

How long is the Cricut warranty?

How do I reset the Cricut Imagine machine?
  1. Power off the Cricut Imagine machine.
  2. Hold down the button below Menu, the button directly above Menu, and power all at the same time.
  3. Hold them until a rainbow screen appears, then release the buttons.
  4. Follow the on-screen prompts to calibrate the screen and complete the reset.

How do you turn on a Cricut?

Plug your Cricut™ machine into a grounded electrical outlet, and turn it on by pressing the On button to the right of the machine door. The doors of the machine will open when the On button is pressed. If the doors do not open, use gentle pressure to open the Cricut™ machine’s door completely.

How do I reset my Cricut explore AIR 2?

You can perform a Hard Reset on the Cricut Expression 2 by following the steps below: Power off the Expression 2 machine. Hold down the magnifying glass, pause, and power buttons all at the same time. Step 2 Connect your Cricut Explore® machine to your computer using the USB.

How do I pair my Cricut Air 2?

Your Explore Air, Air 2, or Cricut Maker Bluetooth device name can be found on a sticker on the bottom of the machine. 4. Select your adapter/Bluetooth module name from the list. Your Android device will initiate the pairing process.

What is Cricut firmware?

Firmware is software installed in your machine that tells it how to run. Occasionally updates improving machine performance or adding features may be released. Select your machine model below for step-by-step instructions to update your machine firmware. Cricut Maker.

Why is the power button on my Cricut explore red?

You can perform a Hard Reset on the Cricut Expression 2 by following the steps below: Power off the Expression 2 machine. Hold down the magnifying glass, pause, and power buttons all at the same time. Step 2 Connect your Cricut Explore® machine to your computer using the USB.

How does the Cricut explore AIR 2 work?

It can Cut over 100 different materials including paper, cardstock, vinyl, Iron-on (Heat Transfer Vinyl), Faux Leather, Magnet Sheets, Sticker Paper, Vellum, and Fabric. The Cricut Explore Air 2 can also write/draw with pens and markers and score your project with a nifty score tool.

How do I change Cricut mode?

If the power button is steady/solid red and no other buttons are lit, this indicates it’s a power related issue. We recommend trying another outlet or power strip. A lot of times it may not be getting enough power to run the machine fully but is able to turn the lights on.