24V Constant Current (CC) LED Strip is 65ft (20 meters). 120V LED Strip maximum length is 164ft (50 meters). 24V RGB & RGBW maximum run lengths are 23ft (7 metres).

Then, How do I control my led with my phone?

The Android App Dabble on your Smartphone is used to control the RGB LED Strip. Connect the Bluetooth of your Smartphone with the Bluetooth Module mounted on evive. Open the Gamepad Module. In the Gamepad module, each button has a different function corresponding to the RGB LED Strip.

Considering this, How many LED strips can you connect together?


29 Related Questions and Answers Found ?


What happens when you cut LED lights?

When cutting LED Strip Light it is very important to cut only on the given cut line between the copper dots. Cutting through or before the copper dots will result in no electrical conductivity to the following section. Use a pair of sharp scissors to cut the LED Strip Light directly down the given cut line.

Can you connect LED light strips together?

The copper solder pads make it so each strip piece is addressable even after being cut. This makes it possible to connect LED strips together or connect the strip in a different area of your home. 12 volt LED lights – The LED strip lights need 12VDC power input to run.

How do you wire a LED light switch to a car?

To connect an LED to a pre-existing switch, run the power wire to the power side of the switch and not the battery. Move the wire from the resistor to the negative terminal of the battery to a good grounding point on the car’s frame. This way, the LED will light only when the switch is engaged.

How do you power a 12v LED strip with a battery?

First, press the power button on the battery and ensure that the 12V output is selected. Then, simply plug in one end of the DC cable into the battery port marked “DC output.” Then, plug the other end into the barrel jack end of the LED strip.

What happens if you cut a LED strip?

When cutting LED Strip Light it is very important to cut only on the given cut line between the copper dots. Cutting through or before the copper dots will result in no electrical conductivity to the following section. Use a pair of sharp scissors to cut the LED Strip Light directly down the given cut line.

Can you put tape over LED Strip Lights?

Yes you can use clear packing tape to secure the strips. No, packing tape won’t cause a fire. But you need to add a fuse before the leds to prevent every other cause of fire.

When you cut LED strips do they still work?

Just the one connected to the power supply. The half still connected to the power will light I bet but power is only on one side you don’t plug both sides in. Yes, the strip can be cut to size. Both will still work.

How do you fix cut fairy lights?

Color shifts are experienced at the end of the LED strips.

Typically, if the end of the LED strip is of a different brightness or color than the beginning of the strip, there is insufficient power being provided to the device.

Why do LED Christmas lights have 3 wires?

Removing a bulb (or twisting it until the wires break) removes the shunt as well, so they all go out. These lights have three wires to carry electricity from end to end so that strings of lights can be daisy-chained together.

Can you hot glue LED strips?

Hot glue gun

In such cases, we recommend using small amounts of hot glue every 300mm, making sure you only use small amounts so that the glue doesn’t ooze onto the front of the LED tape and affect the LEDs.

How do I reset my LED remote?

These are the typical steps to do that:
  1. Plug your LED strips in and turn it on for a few seconds.
  2. Turn it off then take out the power adaptor without turning off the remote control.
  3. Hold the power button for five seconds then turn off the power.
  4. Wait for 3 seconds then turn it on for five seconds.

How do you connect rope ends?

The easiest way to begin is to attach the connector to the power cord first, then plug the power cord/connector assembly into the rope light. Plug in the “female” end of the power cord into the “male” pins of the power connector and secure with the attached threaded collar.

How do you make homemade colored LED strip lights?

Can you leave LED strip lights on all night?

Yes – as long as your led fixture is properly cooled, and properly wired. Second of all, wood is not a very good heatsink, so smearing a few meters of led strips directly to the bottoms of kitchen cabinets is going to reduce the leds lifespan to a year if you‘re lucky.

Can LED strip lights catch fire?

If you cleanly splice the wires, you won’t have any issues. Solder them correctly, twisting them to have a mechanical connection and soldering to have an electrical connection.. then heat shrink it. The LEDs will not give off enough heat to catch on fire or burn your bed, ever.

What are the best LED Strip Lights?

The best LED light strips
  • LIFX Wi-Fi Smart LED Light Strip. The best smart LED light strips. Amazon.
  • Sylvania 10W color LED flex strip. Reliable two-foot smart LED strips.
  • Eve Smart LED Light Strip. This Eve light strip is the newest to the market and easy to set up.
  • Minger LED strip. This Minger light strip is great for a cheaper, outdoor option.

Why won’t my LED strip lights stick?

Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it. Incorrect Power Source – Make sure to double check which power source your lights require.

Can rope light be cut to length?

Some may have cut lines every few inches while others can be a few feet apart. The only rope lights that should not be cut are the rope light kits, which are premeasured at set lengths and cannot be cut. If cut, the rope light in a kit will no longer work and cannot be reconnected again.

Can you use super glue on LED strip lights?

Yes you can use hot glue or replace it with something like 3M mounting tape.

How do you fix cut fairy lights?

SMD (Surface Mounted) 5730 series is the brightest LED strip because it contains powerful LEDs that can create a lot of light.

Can you repair LED rope lights?

Even though it’s now possible to buy a string of rope lights for cheap, if you have a set of broken rope lights, it is possible for you to repair them as opposed to simply throwing them out and replacing them.

Are all rope lights led?

Lighting Source: Rope lighting can come with Incandescent bulbs or LED bulbs. LED are more commonly used because of their flexibility of uses and longevity. They can come in either 120/220vAC input or 12/24vDC input.

Are all rope lights led?

If the connection is already broken:
  1. Remove the heat shrink, separate the wires and strip the insulation from the cable of the battery pack.
  2. Slide a fresh piece of clear heat shrink over one of the wires before you connect them.
  3. Twist the wires together, solder the connection and secure with clear heat shrink.

How do you secure rope lights to the ground?

Use rope lights rated and labeled as safe for outdoor use.
  1. Measure the area where you want to position the rope lights.
  2. Plug strings of uncut rope lights together securely using the attached plugs.
  3. Lay the stakes on the grass along the light path, spacing them 2 to 3 feet apart.

Can you leave LED lights on all night?

Fortunately, because they are cool to the touch and simply dim over time, LED lights do not present these hazards. With this in mind, it’s a good idea to turn off your LED lights at night so the transformer has time to cool down and avoid the risk of overheating.

Do LED lights attract bugs?

For the same reason that bug lights do not attract insects. LED lights, specifically the bulbs typically used in residential lighting, emit very little light in the UV spectrum. LEDs also emit little heat from their light source, further reducing their attractiveness to bugs.

Do you have to plug in LED strip lights?

That means you‘ll need to use one of our LED power adapters if you want to use LED strip lights. So make sure never to plug your strip lights into a regular wall outlet, which uses Alternating Current (AC) power or you can damage the strips, or much more importantly, yourself!