**How many 80 lb bags of concrete** do I need for 1 **yard**? The finished volume of an 80# **bag** of Sacrete or Quikrete (pre-mixed **cement**, sand and gravel) is 0.6 cubic foot (stated on the **bag**). There are 27 cubic feet in a cubic **yard**. Dividing 27 cubic feet by the volume of the **bag** will give you the number of **bags** you need.

Also, What’s the best mix for concrete?

Another “old rule of thumb” for mixing concrete is 1 cement : 2 **sand** : 3 gravel by volume. Mix the dry ingredients and slowly add **water** until the concrete is workable. This mixture may need to be modified depending on the aggregate used to provide a concrete of the right workability.

In this way, How many bags of concrete can you mix in a day? Hand-**mixing** a few **bags of concrete** is **one** thing. **Mixing** 20 **bags will** wear **you** out unnecessarily. Plus, **concrete** is **much** stronger if all of it is **mixed** and poured as quickly as possible.

**26 Related Questions Answers Found**

Table of Contents

**How much water do I need for an 80 pound bag of concrete?**

Measure the recommended **water** amount (each **80**–**pound bag of concrete** mix will require about 3 quarts of **water**). Pour approximately 2/3 of the **water** into the depression.

**How much water do I need for an 80 pound bag of concrete?**

Measure the recommended **water** amount (each **80**–**pound bag of concrete** mix will require about 3 quarts of **water**). Pour approximately 2/3 of the **water** into the depression.

**How much does 80lb bag of concrete cover?**

Quikrete’s Concrete Mix yield’s about . 15 cubic feet for every **20 pounds** of mix, so a 40-pound bag yields . 30 cubic feet, **60 pounds** of concrete mix yields . 45 cubic feet and an 80-pound bag yields .

**How many bags of concrete do I need calculator?**

To determine **how many bags of concrete** you **will need**, divide the total cubic yards **needed** by the yield. Use the following yields per each **bag** size: 40 pound **bag** yields .011 cubic yards. 60 pound **bag** yields .017 cubic yards.

**How Long Can concrete be worked?**

**Concrete**

In standard industrial cases, full strength **concrete** is recognized at 28 days. At seven days, you should have **concrete** that is cured to 70% full strength or greater. But to answer the question of, “**How long does concrete** take to set?” **concrete** setting time is generally 24 to 48 hours.

**How many yards does a cement mixer hold?**

**Will a cement mixer fit in a car?**

1/2 Bag **Cement Mixer**. Lightweight **mixer** which **can** be dismantled to **fit** into an estate **car** or large hatchback. Ideal for small concreting or plastering tasks. Mixes approximately 1 wheelbarrow full per load.

**How much does a cement mixer make?**

**How much does a cement mixer make?**

Salary Range (Percentile) | ||
---|---|---|

25th | Average | |

Annual Salary | $35,000 | $39,163 |

Monthly Salary | $2,917 | $3,264 |

Weekly Salary | $673 | $753 |

**What is the minimum amount of concrete you can order?**

The **minimum concrete** delivery for ready-mix **concrete** is a truckload of about 10 cubic yards at $119 to $147 per cubic yard. If **you order** less than 10 cubic yards of **cement**, there **will** be an additional fee of approximately $53 per cubic yard.

**How many sacks of concrete do I need?**

To determine **how many bags of concrete** you **will need**, divide the total cubic yards **needed** by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

**What happens if concrete is too dry?**

**If** it dries **too** quickly, the surface of the **concrete** will be weak, and will be subject to spalling. Spalling **happens when** a weak surface layer of **concrete** allows water to infiltrate. The water freezes and breaks up the surface of the **concrete**.

**How much water do I need for a 60 pound bag of concrete?**

It is best to start with the minimum amount of **water** listed on the **60**–**pound bag of concrete’s** label. For hand-**mixed concrete**, add the **water** in all at once. If you use a **concrete** mixer, add half before you start the machine and the other half while the **concrete** is **mixing**. **Mix** the **water** in well.

**Is it hard to mix concrete?**

**concrete**isn’t complicated.

You add some water, stir it up and pour it out. But to get the most strength from the **concrete**, you have to recognize when it has just the right amount of water **mixed** in. Too little water and the particles in the **mix** won’t stick together. Too much water weakens the **concrete**.

**How do you calculate cubic feet?**

One of the least expensive ways to get **concrete** is to **mix your own**. You can buy bags of the **mix** from a home improvement store. Typically, you only have to add water for it to be ready to pour. However, it is important to get the ratio right and to **mix** the **concrete** thoroughly.

**How do you calculate cubic feet?**

Another “old rule of thumb” for mixing concrete is 1 cement : 2 **sand** : 3 gravel by volume. Mix the dry ingredients and slowly add **water** until the concrete is workable. This mixture may need to be modified depending on the aggregate used to provide a concrete of the right workability.

**How much does it cost to rent a cement mixer?**

$35.00 4-Hour (Minimum) | $200.00 Per Week |
---|---|

$50.00 Per Day | $600.00 4 Weeks |

**How do you make bagged concrete stronger?**

Most **bagged concrete** comes in standard-size bags. If I wanted to **make** it **stronger**, I’d take an old kitchen measuring cup and add 16 ounces of Portland **cement** and eight ounces dry measure of hydrated lime to each **bag** of **concrete**. You want to blend the extra **cement** and lime with the **bagged concrete** in dry form.

**How long is concrete workable?**

**Concrete**

In standard industrial cases, full strength **concrete** is recognized at 28 days. At seven days, you **should** have **concrete** that is cured to 70% full strength or greater. But to answer the question of, “How **long** does **concrete** take to set?” **concrete** setting time is generally 24 to 48 hours.

**How much concrete can I mix in a wheelbarrow?**

You **can** make your own **concrete mix** using 1 part cement, 2 parts sand and 3 parts gravel. So, to three-quarter-fill the average heavy-duty **wheelbarrow**, put in 6 spades full of gravel, 4 spades full of sand and 2 spades full of cement (which is a ratio of 1 part cement, 2 parts sand and 3 parts gravel).

**How many m3 are in a cement mixer?**

A **bag of cement**, portland **cement**, 94 pound in the USA, less in Canada, used with sand, rock and water to make concrete runs right at $10 around here. **Prices** vary of course.

**How big is a concrete mixer?**

Generally available in **sizes** ranging from 3 to 12 cubic feet, the smaller models will fit in the trunk of most cars while the larger capacity units can be towed easily. The versatility of a **mixer** makes it a cost-effective purchase, notes Faler.

**How much is concrete per post?**

Remember, the depth of the **post** hole should be one-half of the above-ground **post** height. (Example: For a 6 feet above ground **post**, use a **post** with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting **Concrete** you need.

**How much is concrete per post?**

**Cubic feet formula for different units**

- length(feet) × width(feet) × height(feet) = cubic feet(cf³)
- length(inches) × width(inches) × height(inches) ÷ 1728 = cubic feet(cf³)
- length(yards) × width(yards) × height(yards) × 27 = cubic feet(cf³)
- length(cm) × width(cm) × height(cm) ÷ 28316.846592 = cubic feet(cf³)

**How much concrete does it take to fill a sonotube?**

For example, a **sono tube** with a 10″ diameter and a 4′ depth requires 0.08 cubic yards of **concrete**.

**How much does a cubic foot of concrete weigh?**

**Can you pour a driveway with bagged concrete?**

Quikrete recommends its Quikrete 5000 **concrete** mix for **driveway** use, with coverage of . 6 cubic feet per 80-pound **bag**. For a **driveway** foundation 20 feet long, 10 feet wide and 4 inches in depth, the volume of the **driveway** is 66 cubic feet.

**How do you mix a yard of concrete?**

An average 1:2:3 **mix** contains one part cement, two parts sand and three parts gravel. To **make** 1 cubic **yard of concrete**, you’d need seven 94-pound bags of cement, about 1/2 cubic **yard** of sand and just over 3/4 cubic **yard** of gravel. The amount of water you use depends on how wet the sand is.

**How much is a bag of cement?**

**How much does a wheelbarrow of concrete cost?**

Depending upon your **wheelbarrow** size (i.e. 2 or 3 cubic feet **per wheelbarrow** load), it will take 9 to 14 full loads to equal 1 cubic yard. The chart below shows **how many** full **wheelbarrow** loads it takes to equal the specified number of cubic yards. A 2 cubic foot **wheelbarrow** typically has a shallow basin.

**How do you make cement in a mixer?**

A **bag of cement**, portland **cement**, 94 pound in the USA, less in Canada, used with sand, rock and water to make concrete runs right at $10 around here. **Prices** vary of course.