#57 Washed Gravel -(3/4″ to 1″)

Sold by the ton, approximately 1.4 tons per cubic yard. #57 [3/4″], Covering drain tiles, in dog kennels, decorative ground cover, under decks (visible), or backfilling after waterproofing.

Also, How much does 1 cubic yard of stone weigh?

One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. Or up to one and a half tons approximately. Generally, a cubic yard of gravel provides enough material to cover a 100-square-foot area with 3 inches of gravel. Keep in mind that some materials compact more than others, so exact coverage may vary.

Hereof, How many tons of 57 limestone are in a cubic yard?

Sold by the ton, approximately 1.5 tons per cubic yard. # 57 [3/4″ to 1″], Base for concrete or asphalt, Driveways or parking lots, or Under decks (not visible).

Also to know Does 57 stone need to be compacted? No. 57 stone should be essentially self-compacting and have minimal “settlement” over time. Settlement observed where it was used as a base would likely come from migration of the materials (either below or above) into the No. 57 stone.

How many yard is a ton?

Ton Register to Cubic Yard Conversion Table

Ton Register [ton Reg] Cubic Yard [yd^3]
1 ton reg
3.7037037037 yd^3
2 ton reg 7.4074074074 yd^3
3 ton reg 11.1111111111 yd^3
5 ton reg 18.5185185185 yd^3

## How much does 1 cubic yard of pea gravel weigh?

A cubic yard of pea gravel weighs about 1.5 short tons, or about 3,000 pounds.

## How many yards is 3 tons gravel?

How many tons in 3 cubic yards of gravel:- using thumb rule as 1 cubic yard gravel = 1.4 tons, here we have 3 cubic yards of gravel, so 3 cubic yards of gravel in tons = 1.4 ×3 = 4.2 tons, so there are 4.2 tons in 3 cubic yards of gravel.

## What does 5 yards of stone weigh?

Soil: Weighs about 2,200 pounds per cubic yard, depending on the moisture content. Sand, Gravel, Stone: Can tip the scales at upwards of

3,000 pounds per cubic yard

.

How many yards is 3 tons?

Cubic Yard [yd^3] Ton Register [ton Reg]
3 yd^3 0.81 ton reg
5 yd^3
1.35 ton

reg

Apr 10, 2020

## How much does a dump truck load of gravel cost?

A truck load of gravel costs \$1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for \$46 per hour that spread 12 cubic yards per hour.

## How many yards are in a ton of gravel?

1 cubic yard of gravel weight is 2800 lb, in United States, 1 ton of gravel is equal to 2000 pounds, convert tons of gravel to cubic yards = 2000/2800 = 0.714 cubic yards, so there are 0.714 cubic yards in a ton of gravel.

## How many yards of gravel does a dump truck hold?

Dump Truck Cubic Yardage – The Basics

While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards.

## How much is a dump truck full of gravel?

Truck Load of Gravel Cost. A truck load of gravel costs \$1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for \$46 per hour that spread 12 cubic yards per hour.

## What is 57 rock used for?

#57 stone is one of the most commonly used types of crushed stone due to its versatility. It is ideal for a variety of projects. It is used as aggregate in concrete. It works well as a base for building sidewalks, asphalt roads, driveways, and railroad ballast.

## Is 57 gravel good for a driveway?

57 granite is larger, which leaves larger spaces between the stone. Because of the size and shape of this gravel your tires can spin a little when driving through, but does provide excellent drainage for a driveway. This is a very popular option and looks really nice when spread.

## How many yards is 7 tons?

7.0 tons is 5 cubic yards of gravel.

## Is a yard the same as a ton?

A cubic yard is a measure of volume while a ton is a measure of weight. … For example, a cubic yard of crushed rock is lighter than a cubic yard of topsoil. The reason Washington Rock sells topsoil and sand by cubic yard rather than by ton is that their weight varies with the seasons.

## Is a yard of dirt a ton?

As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

## How much does a cubic yard of gravel cost?

Gravel is one of the cheapest driveway materials. Typically, it’s sold either by the cubic yard (a measure of volume) or by the ton (a measure of weight). The average cubic yard of gravel costs between \$40 and \$55. Expect to pay \$50 to \$65 per ton.

## How many tons are in a cubic yard of gravel?

Measuring the Driveway

For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

## How many yards are in a ton of gravel?

Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

## How do I calculate tons of gravel?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.