A **truck load of gravel costs** $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, **truck** size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.

Also, What does 5 yards of stone weigh?

Soil: Weighs about 2,200 pounds per cubic yard, depending on the moisture content. Sand, Gravel, Stone: Can tip the scales at upwards of

3,000 pounds per cubic yard

.

…

How many yards is 3 tons?

Cubic Yard [yd^3] | Ton Register [ton Reg] |
---|---|

3 yd^3 | 0.81 ton reg |

5 yd^3 |
1.35 ton reg |

•

Apr 10, 2020

Hereof, What is the cheapest gravel for a driveway?

**Crush and run** is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.

Also to know What is the best size gravel for a driveway? A commonly used gravel size for driveway base layers is **#3 gravel**. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.

How much will a ton of gravel cover?

Un-compacted Cloburn aggregates weigh 1.4 tonnes per cubic metre. Therefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one **tonne will cover** 14 square metres.

**16 Related Questions Answers Found**

Table of Contents

**How many yards is a ton of crushed stone?**

Most gravel and crushed stone products have similar weights per ton. A general rule of thumb when converting cubic yards of gravel to tons is to **multiply the cubic area by 1.4**. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In addition, there are 2,000 pounds to a ton.

**How much does 2 yards of gravel weigh?**

Regarding this, “how much does 2 yard gravel weigh?”, typically, 1 yard of gravel weighs around 3000 lbs or 1.5 short tons, therefore 2 yards = 3000×2 = **6000 lbs**, so in general, on average 2 yards of gravel weighs around 6000 lbs or 3 short tons.

**How much does 1/2 yard gravel weigh?**

A cubic yard is a measurement that is 3 feet by 3 feet by 3 feet. A cubic yard measures volume where a ton measures weight. A yard of topsoil usually weighs about 1,800 pounds and a yard of gravel usually weighs **about 2,200 pounds**.

**What is the cheapest material to make a driveway?**

**Gravel driveways** are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

**What is cheapest way to do a driveway?**

**A gravel driveway** is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.

**How many square feet will 7 tons of gravel cover?**

At a depth of 1 inch, the coverage is up to 240 square feet, and 3 inches can reduce the coverage rate to 80 square feet. One (1) ton of river rock covers approximately a 50-75 sq. ft.

…

How many square feet does a ton of gravel cover?

PRODUCT | COVERAGE RATE PER TON OF MATERIAL |
---|---|

3/4”, 7/8,” 1” Screened Gravel |
100 Square Feet @ 2” depth |

•

May 28, 2020

**What is the best crushed rock for a driveway?**

Among the other options are **crushed stone #411, quarry process, pea gravel, jersey shore gravel, marble chips**, and river rock. These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

**What are the different sizes of crushed stone?**

Crushed Stone Grade 1-10

- #1 – The # 1 crushed stone grade is the largest of the crushed stone grades and includes stone between 2-4 inches long. …
- #3 – This size of the stone ranges from 1/2 to 2 inches long. …
- #5 – Crushed stone #5 is 1 inch or smaller in size. …
- #8 – These stones are between 3/8 and 1/2 inch long.

**What is #2 gravel?**

This **primarily 1″ crushed, washed gravel with a top size of** 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.

**How much does a 25kg bag of gravel cover?**

As a rule of thumb 1 of our 25kg bags will cover an **area of 0.25m to a recommended depth of 50mm**.

**How many yards of gravel does a dump truck hold?**

Dump Truck Cubic Yardage – The Basics

While there is room for variance, most full-size dump trucks have a capacity of **between 10 and 16 cubic yards**.

**What weight is a bulk bag of gravel?**

The majority of bulk bags will hold **between 700 – 900kg** (that’s nearly a tonne by the way) so are actually quite big and heavy.

**How many yards is 7 tons?**

7.0 tons is **5 cubic yards** of gravel.

**How do I calculate how much crushed stone I need?**

Formula for Needed Crushed Stone

**Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27**. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.

**How many yard is a ton?**

Ton Register to Cubic Yard Conversion Table

Ton Register [ton Reg] | Cubic Yard [yd^3] |
---|---|

1 ton reg |
3.7037037037 yd^3 |

2 ton reg | 7.4074074074 yd^3 |

3 ton reg | 11.1111111111 yd^3 |

5 ton reg | 18.5185185185 yd^3 |

**How many yards is 3 tons gravel?**

How many tons in 3 cubic yards of gravel:- using thumb rule as 1 cubic yard gravel = 1.4 tons, here we have 3 cubic yards of gravel, so 3 cubic yards of gravel in tons = 1.4 ×3 = **4.2 tons**, so there are 4.2 tons in 3 cubic yards of gravel.

**How many wheelbarrows are in a yard?**

Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take

9 to 14 full loads

to equal 1 cubic yard.

…

Wheelbarrow Conversions.

Cubic Yards |
2 Cubic Foot Wheelbarrow Loads |
3 Cubic Foot Sized Wheelbarrow Loads |
---|---|---|

1 | 14 | 9 |

2 | 27 | 18 |

3 | 41 | 27 |

4 | 54 | 36 |

**How much does a pickup truck load of gravel weigh?**

typically Sand and Gravel weigh **about 1500 pounds (3/4 of a ton) per scoop** (1/2 cubic yard). One cubic yard (2 scoops) will weigh about 1.5 tons (3000 lbs.). Soils typically weigh a little less, about 1000-1200 pounds per scoop. How much area does a ton of gravel cover?

**What’s heavier gravel or sand?**

According to Glover lose dry gravel weighs about 1522 kg per cubic meter. **dry sand** weighs about 1602 kg per cubic meter. Gravel typically will not pack as tightly as sand.