A truck load of gravel costs $1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for $46 per hour that spread 12 cubic yards per hour.

Accordingly, How much gravel can I put in my f150?

and standard pickup trucks (F-150, Silverado, Ram, etc.) have approximately a 1500 lb. payload. They should be able to handle one scoop of a heavy aggregate or 1.5-2 scoops of a soil mix. Depending on the length of the truck bed, these trucks should be able to hole 2-4 scoops of a mulch or compost.

next, What is the cheapest gravel for a driveway?

Crush and run is one of the cheapest materials that can be used in a gravel driveway at about $0.40 per square foot. Cost per cubic yard is about $20 and per ton about $28.

In this manner, What is the best size gravel for a driveway? A commonly used gravel size for driveway base layers is #3 gravel. This rock is generally 1-2 inches in diameter and does double duty by establishing a solid, reliable foundation and providing adequate drainage; both critical factors in driveway construction.

Whats the best gravel for a driveway?


These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

  • Crushed Stone #411. It is crushed up #57 stone combined with rock dust. …
  • Quarry Process. …
  • Pea Gravel. …
  • Jersey Shore Gravel. …
  • Marble Chips. …
  • Blackstar or Blacktrap Rock.
18 Related Questions Answers Found

What’s the best gravel for a driveway?


These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.

  • Crushed Stone #411. It is crushed up #57 stone combined with rock dust. …
  • Quarry Process. …
  • Pea Gravel. …
  • Jersey Shore Gravel. …
  • Marble Chips. …
  • Blackstar or Blacktrap Rock.

How much gravel is in a ton?

A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.

How much gravel do I need to fill a hole?

Multiply the total number of inches for the gravel depth by the total square feet from the previous step. For example, using a gravel depth of 3 inches, convert the inches to feet, which equals 0.25. Multiply 120 square feet by a gravel depth of 0.25 feet to equal a volume of 30 cubic feet.

How much will a ton of gravel cover?

Un-compacted Cloburn aggregates weigh 1.4 tonnes per cubic metre. Therefore if you wish to apply them at a 50mm depth (the normal depth for a driveway) one tonne will cover 14 square metres.

How do I make my gravel driveway solid?


Project Summary

  1. Stake out the path of the driveway.
  2. Clear grass or topsoil from staked area.
  3. Calculate cubic yardage of gravel needed for each driveway layer.
  4. Schedule and prepare site for gravel delivery.
  5. Level the ground along the path of the driveway.
  6. Spread and compact the base layer of gravel.

How many ton of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How do I keep my gravel driveway from washing out?

Backfill the trenches with 1/2-inch drain rock using a shovel. When the drain rock has reached the level of the driveway, lay geotextile sheet on top of it before replacing the gravel. The geotextile sheet prevents dirt and silt from seeping into the drain and clogging it.

What size is crush and run gravel?

The product can typically range in sizes from 1/2″ to 4″ stones with fines. It may often look like sand, though it is actually part of the process of crushing limestone, granite or whatever is local to your market for coarse aggregates.

How much does a ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

What is #2 gravel?

This primarily 1″ crushed, washed gravel with a top size of 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.

How can I fix a cheap muddy driveway?

The best way to fix a muddy driveway is with TRUEGRID permeable pavers. The permeable pavers offered by TRUEGRID are an inexpensive, durable, effective, and long-lasting solution to muddy driveways.

How do you fix a muddy driveway with gravel?

If you have a low spot that’s holding water, a quick fix is to fill the low spot with large crushed rock and then place a layer of smaller gravel on top, says Morrison Gravel. The best type of gravel for a muddy driveway that will fill in the muddy spots and still allow you to drive on it is a rock called minus rock.

How do you calculate gravel?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

What is bank run gravel?

Bank Run Gravel is unprocessed gravel. Depending on the source, it can be 4″ minus, or a very coarse, clean, compact fill with 8″ and larger stones in it. It is usually the least expensive base or compact fill available.

How many square feet does 1 ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

How do you prepare ground for gravel?


Ground preparation

  1. Clear the space of all vegetation. …
  2. Remove weeds and carefully take out plants you want to keep and introduce back into your gravel garden.
  3. Dig over the ground once or twice to enhance the condition of the top layer of soil.
  4. Rake well to even out the surface and break down any lumps and bumps.

How do you calculate gravel?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How deep should my gravel be?

Gravel 1-1/2” to 2” will need to be 3” deep, and 2” to 4” gravel needs to be 4” deep. This is to provide complete coverage and so you cannot see the landscape fabric (weed-mat) through the gaps in the gravel.

How much does a 25kg bag of gravel cover?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

How deep should I lay gravel?

Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.