The average cost for vinyl **siding** installation on a **1,500 sq ft**. home can range from $4,658 to $5,795. The cost for vinyl **siding** is usually around $3.50 per **square foot**. A high quality vinyl **siding would** increase the price and you could expect to pay as **much** as $7 per **square foot**.

Also, How much LP smart siding do I need?

**LP SmartSide** cost: $2.00 to $4.00 per square foot for **siding** and all trim accessories. **LP SmartSide** installation: $5.00 to $10.00 per square foot.

In this way, How do you calculate square footage for lap siding? To find the area of a triangle, multiply the height of the triangle by the length of the longest side, then divide by two. Once you know the area for each section, add all of the areas together to determine the total **square footage** of your home’s exterior.

**36 Related Questions Answers Found**

Table of Contents

**How many square feet does Hardie plank cover?**

**James Hardie is** a fiber cement **siding**, and **is** considered a premium quality product among other fiber cement options. Putting up **Hardie Plank** on a 2,000 **sq**. ft.

**How do you figure out square footage for siding?**

Start by measuring the height and width of each wall of the building. Multiply each length and height measurement to find the **square footage** of each wall, then add them together to find the total **square footage**. Divide the total by 100 to find the number of squares of vinyl **siding** to order.

**How much should I charge to install Hardie siding?**

**Installation**Costs

**Installation will cost** between $300 and $850 per square (100 sq. ft.) depending on the complexity of the job, your location, and the company you choose to hire. **Fiber cement siding** is heavy — about 2.5 pounds per square foot — and delicate.

**Is Hardie board better than vinyl siding?**

Since it is composed of cement-like materials and wood fibers, it is stronger **than vinyl** and much less susceptible to wind and weather damage. Lastly, because **hardie board** holds up against heat and cold **better than vinyl siding**, **hardie board** does not become brittle with age.

**How much drywall do I need for a 10×12 room?**

Room Size | With 9′ ceilings | 4×9 sheets needed |
---|---|---|

9’x10′ | 432 | 12 |

10’x10′ | 460 | 13 |

12’x15′ | 486 | 14 |

12’x12′ | 576 | 16 |

**How much does it cost to side a 1500 sq ft house?**

**Cost**

The **average cost to side** a **house** ranges from $4,300 to $15,700, or $3 to $11 per **square foot** depending on the size of **home** and materials used. Vinyl siding **prices average** $7,100 for a 2,000 **square foot home**.

**How many Hardie shakes are in a square?**

**shingles**are also available in 4.2 in, 5.5 in, 6.75 in, 7.25 in & 10 in widths.

**Hardie Shingle** Siding, Straight Edge Panel Specifications.

Plank Coverage | 60 Pieces Per Square |

Plank Characteristics | A clean-lined, tailored look. |

**How much should Hardie plank siding overlap?**

**Does fiber cement siding increase home value?**

**Fiber cement siding**cost versus

**value**

It cost an average of $13,400, resulting in a resale **value** of $11,600, or an 87 percent return. As opposed to other remodeling projects like sunroom additions or **home** office remodels, new **siding** for your **home** has proven to yield a very solid return for many years.

**How do you calculate square footage for lap siding?**

To find the number of squares of **siding** needed for an installation, **measure** each walls width and height in feet. Multiply the width and height to get the area of the wall in **square** feet. Divide the **square footage** by 100 to get the number of squares needed for the wall.

**How many square feet does a pallet of Hardie siding cover?**

Prime Pcs./**Pallet** 240 Pcs./**Sq**. 14.3 Thickness 5/16 in. Length 12 ft.

**How much LP smart siding do I need?**

**LP SmartSide** cost: $2.00 to $4.00 per square foot for **siding** and all trim accessories. **LP SmartSide** installation: $5.00 to $10.00 per square foot.

**How thick is Hardie plank?**

Series Name | HZ10 HardiePlank |
---|---|

Type | Lap siding |

Actual Thickness (Inches) | 0.312 |

Actual Length (Inches) | 144.0 |

Actual Width (Inches) | 8.25 |

**How much siding do I need for a 2000 square foot house?**

Siding Type | Cost Per Square Foot | Installation Cost – 2,000 square feet |
---|---|---|

Aluminum | $1.50 – $7 | $3,000 – $14,000 |

Brick Siding | $5 – $15 | $10,000 – $30,000 |

Fiber Cement | $5 – $12 | $11,000 – $24,000 |

Hardie Board | $0.80 – $5 | $1,600 – $11,000 |

**What size does hardiplank come in?**

Vinyl **siding** will cost you anywhere from $3.50 to $7.50 per square foot installed for an average 1,500 square ft. home with installation. In other words, the total cost will be $5,250 to $11,250 for a cape-style or split ranch home.

**What size does hardiplank come in?**

Lowes Vinyl Siding Costs | Zip Code | |
---|---|---|

Basic | Best | |

Lowes Vinyl Siding – Material Prices | $120.00 – $192.00 | $240.00 – $336.00 |

Lowes Vinyl Siding – Installation Cost | $252.00 – $384.00 | $504.00 – $648.00 |

Lowes Vinyl Siding – Total | $372.00 – $576.00 | $744.00 – $984.00 |

**How many pieces of siding are in a square?**

A box of vinyl siding contains two “squares.” A square in construction lingo equals 100 square feet, so a box of vinyl siding will cover **200** square feet.

**How many pieces of siding make a square?**

A box of vinyl **siding** contains two “squares.” A **square** in construction lingo equals 100 **square** feet, so a box of vinyl **siding** will cover 200 **square** feet.

**How do you measure a lap of vinyl siding?**

The size of the panel is usually the most important factor. When matching **vinyl siding**, one needs to **measure** from the bottom of the panel to the first “**lap**“. This **measurement** will typically be 4, 4.5 or 5 inches. There are 2 **laps**, giving the appearance of 2 boards per each individual panel.

**Are there different grades of Hardieboard?**

**Siding**Fiber

**Cement Siding**

They are offered in a variety of **different** finishes including smooth, wood-grain, or rough-sawn surface treatments. While most clapboards are 5/6 inch thick, some styles that appear more like wood are available in 5/8 inch thickness.

**How much should Hardie plank overlap?**

**Hardie Board** is the best known brand of cement **board siding**, which is often called fiber cement. All fiber cement products are **waterproof** and designed to hold up in extremely strong rain, winds, hail and salt air. **Hardie Board** is also extremely fire resistant.

**What is Hardie plank made of?**

A combination of cellulose fibers and cementitious materials, **HardiePlank** is fiber-cement siding that comes in long, horizontal strips, just like wood lap siding. **HardiePlank** is partly wood, in the form of cellulose, and partly mineral.

**How do you measure for siding?**

Start with all square and rectangular walls, **measuring** height and width. **Siding** is ordered in “squares”. One square equals 100 square feet, so multiply height x width, then divide by 100 for total “squares”. If you are using different materials on different walls, you will want to keep these separate.

**How do you measure for siding?**

HardiePlank lap siding **comes in** 12-ft. lengths. Nomi- nal widths from 51/4 in. to 12 in. create a range of exposures from 4 in. to 103/4 in.

**How do I calculate how much shiplap I need?**

You will take the total square footage **needed** and divide it by the square footage of an individual plank to get the total **amount** of planks **needed** to complete your project. Back to my example: 96 sq ft / 9.33 sq ft = 10.28 boards.

**Is Hardie board waterproof?**

**WATERPROOF**CEMENT BACKER

**BOARD**

The all-new HardieBacker® Cement **Board** with HydroDefense™ Technology delivers exceptional performance with a **waterproof** composition throughout the **board**.

**How do you measure for siding installation?**

Start by **measuring** the height and width of each wall of the building. Multiply each length and height **measurement** to find the square footage of each wall, then add them together to find the total square footage. Divide the total by 100 to find the number of squares of vinyl **siding** to order.

**How much does it cost to side a garage?**

Typical costs: Range from less than $1/square foot for do-it-yourself panels from a building supply store to $2-$7 or more if installed by a contractor. For an 1,800-square-foot exterior (50′ long, 40′ wide and 10′ tall’), that’s $3,600 to $12,600 and up for professionally hung vinyl.

**Is Hardie board siding waterproof?**

**WATERPROOF**CEMENT BACKER

**BOARD**

The all-new HardieBacker® Cement **Board** with HydroDefense™ Technology delivers exceptional performance with a **waterproof** composition throughout the **board**.

**How do you price vinyl siding?**

**Siding Cost**. The average homeowner pays between $5,000 and $14,050 for **siding** to be installed on their home exterior. **Vinyl siding costs** about $0.90 to $2.50 per square foot compared to fiber cement at $0.70 to $5.25 and brick at about $3.50 per square foot.

**How long does Hardie board last?**

**Hardie Board** is the best known brand of cement **board siding**, which is often called fiber cement. All fiber cement products are **waterproof** and designed to hold up in extremely strong rain, winds, hail and salt air. **Hardie Board** is also extremely fire resistant.