Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

Also, What is the best size gravel for a driveway?

In general, driveway gravel should be relatively large, between about 3/8 and 3/4 inch in diameter, as compared to the gravel used for footpaths, which is typically 1/4 to 3/8 inch in diameter. Another factor to consider is the amount of very small granular material, called “fines,” in the gravel.

In this way, How many tons of gravel are in a dump truck load? How Many Tons of Gravel Can Fit in a Dump Truck? A dump truck can hold anywhere from 13 to 25 tons of gravel, based on common sizes available for commercial use. Ten-wheelers are rated to reliably hold 13 tons, whereas the largest flat-bed trucks can contain 25 tons of gravel.

## How many bags of gravel equal a yard?

Bags or Bulk

There are 54 bags of stone or soil per 1 cubic yard. There are 27 1 cubic foot bags or 18 1.5 cubic foot bags of mulch per yard. Consider a Â½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3″ deep.

## How many tons of gravel do I need?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

## How much is a truckload of pea gravel?

The general range for a cubic yard of plain pea gravel is about \$30 to \$35, and a ton will cost about \$40 to \$45. For a colored variety, expect to add an extra \$20 to \$50 to those prices. If you buy in bulk, or 10 or more tons at a time, you may be able to get the price down to as low as \$15 to \$20 per ton.

## How much will a ton of gravel cover?

How Much Does A Ton Of Gravel Cover? When laying the recommended gravel-layer depth of 4″, then a ton of pea gravel covers an area of 40 to 50 square feet. Spreading out 1-ton of gravel at 2″ deep covers 80 to 100 square feet, while 6″ deep covers 25 to 35 square feet or less if you use larger stones.

## How much is a ton of rock?

Landscaping Rock & Stone Pricing
Rock Type Price
Large Boulders \$100-\$600 per ton
Bull \$37 per cubic yard \$4 per bag \$2.50 per 5-gallon bucket
River Rock Gravel \$40 – \$45 per ton \$30 – \$35 per cubic yard \$4 – \$8 per bag
Crushed Stone, Rock, Shells \$50 – \$65 per ton \$40 – \$55 per cubic yard

## How deep should my pea gravel be?

Similar to pea gravel walkways, most pea gravel patios are constructed to offer a depth of about two inches, though you may need to dig deeper if the underlying soil isn’t firm enough to provide an effective foundation. Thus, your first step should be to determine whether or not you’ll need to add a base layer.

## How much does a ton of 57 stone cost?

#57 Granite Gravel—\$52 per ton

Typical construction, driveway, and drainage gravel.

## How much area does a bulk bag of gravel cover?

1 bag = 0.12m2 approx. 4 bags = 1m2 approx. 8 bags = 1m2 approx. 1 Bulk Bag (850kg) = 10m2 approx.

## How many bags of rocks do I need?

Divide the cubic yards you need to cover with river rock by the number one bag of covers. For example, if you need 25 cubic feet of river rock and each bag covers 1/2 cubic foot, buy 50 bags.

## Is a gravel driveway cheaper than concrete?

Gravel is a whole lot cheaper than a concrete, asphalt, or other paved surface. It can cost less than 1/2 of paved driveways. Even though you will have to maintain the gravel, it is inexpensive to do so.

## Does Home Depot have gravel?

All-Purpose Gravel-115150 – The Home Depot.

## How many bags of pea gravel equal a cubic yard?

50 Pounds of Peas

A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot.

70 pounds

## How many yards is a dump truck?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

## How many yards is a dump truck?

Yes, It Is a Formula, but There Is No Need to Fear It

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.

## How thick should pea gravel be?

Pea Gravel Patio Depth

Similar to pea gravel walkways, most pea gravel patios are constructed to offer a depth of about two inches, though you may need to dig deeper if the underlying soil isn’t firm enough to provide an effective foundation.

## How many tons are in a yard?

A cubic yard is equal to 27 cubic feet. You can use the online calculator to determine how many cubic yards of material are required. As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

## How many yards is a dump truck?

Dump Trucks: If you’re having the material delivered, a small dump truck usually carries about 5 cubic yards, and a larger one carries about 10 cubic yards or more.

## What do you put under pea gravel?

Compared to other hardscaping materials, installing pea gravel is relatively easy. Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel.

## Does Home Depot sell bulk gravel?

Transfer dump trucks typically haul between 26 and 27 short tons (23.6 and 24.5 t; 23.2 and 24.1 long tons) of aggregate per load, each truck is capable of 3â€“5 loads per day, generally speaking.

## How many sq ft does a ton of gravel cover?

A ton of gravel can cover anywhere from 20 square feet to 240 square feet depending on depth. More rocks per square foot result in a lower coverage rate.

## Is pea gravel good for drainage?

Since it has a smooth finish, pea gravel is also regularly used for walkways, dog runs, playgrounds, patios, and a variety of other high-traffic areas. Like crushed stone, pea gravel can also be used for underground projects, such as drainage and pipe bedding.

## Is pea gravel good for drainage?

Dump Trucks: If you’re having the material delivered, a small dump truck usually carries about 5 cubic yards, and a larger one carries about 10 cubic yards or more.

## Can you walk barefoot on pea gravel?

Pea gravel used for a walkway provides a softer surface to walk on compared with using a larger type of gravel. Walking on pea gravel barefoot is more bearable than walking on larger rocks which some times have jagged edges that can stab at feet.

## How much area does a bulk bag of gravel cover?

Gravel Calculator
Gravel, Chippings and most Pebbles Cobbles
Useful Coverage recommended depth 50mm Useful Coverage recommended depth 100mm
1 bag = 0.25m2 approx. 1 bag = 0.12m2 approx.
4 bags = 1m2 approx. 8 bags = 1m2 approx.
1 Bulk Bag (850kg) = 10m2 approx. 1 Bulk Bag (850kg) = 5m2 approx.

240 square feet

## Where can I get free gravel?

Here’s how to get all the free rocks you need for your garden:
• 01 of 06. Visit Construction Sites. Klaus Vedfelt / Getty Images.
• 02 of 06. Help a Farmer.
• 03 of 06. Talk to Road Construction Crews.
• 04 of 06. Go Rockhounding.
• Curb Shop for It. alejandrophotography / Getty Images.
• 06 of 06. Shop Craigslist and Freecycle.

## How many tons does a dump truck hold?

Gravel Calculator
Gravel, Chippings and most Pebbles Cobbles
Useful Coverage recommended depth 50mm Useful Coverage recommended depth 100mm
1 bag = 0.25m2 approx. 1 bag = 0.12m2 approx.
4 bags = 1m2 approx. 8 bags = 1m2 approx.
1 Bulk Bag (850kg) = 10m2 approx. 1 Bulk Bag (850kg) = 5m2 approx.

## How many sq ft are in a ton?

MISCELLANEOUS
1/2â€³ = 480 square feet per ton
1â€³ = 240 square feet per ton
1 1/2â€³ = 160 square feet per ton
2â€³ = 120 square feet per ton
2 1/2â€³ = 96 square feet per ton

## How many yards of rock are in a ton?

Transfer dump trucks typically haul between 26 and 27 short tons (23.6 and 24.5 t; 23.2 and 24.1 long tons) of aggregate per load, each truck is capable of 3â€“5 loads per day, generally speaking.