23mm = 29/32 inch. 24mm = just over 15/16 inch.
Likewise, What is 10mm in standard?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
Also, How many millimeters is an inch and 7 16? Fractional Inches to Decimal Inches and Metric Millimeters
Inches  Metric  

Fractional  Decimal  mm 
27/64  0.4219  10.7156 
.  0.4331  11.0000 
7/16 
0.4375 
11.1125 
Secondly, How many mm means 1 inch?
1 inch is equal to 25.4 millimeters, which is the conversion factor from inches to millimeters.
What is equivalent to a 15 mm wrench? 15mm
Bolt Diameter  Wrench Size (Standard)  Wrench Size (Metric) 

3/8″  9/16″  15mm 
7/16″  5/8″  16mm 
1/2″  3/4″  19mm 
9/16″  13/16″  21mm 
Feb 27, 2020
Table of Contents
What size is 10mm in inches?
SAE to Metric Conversion Chart
SAE  Metric  Inch 

10mm 
0.394 

13/32″  0.406  
11mm  0.433  
7/16″  0.438 
•
Apr 29, 2020
Are all 10mm bolts the same?
You can have a 10mm head on different sized bolts. Remove the bolt and bring it with you to the hardware store when you go to buy the new one, and test it on various nuts to see what size it is. You have to watch out because metric bolts in the appropriate size (probably M6 or so) come with different thread pitches.
What size is a 10mm drill bit in standard?
Metric Tap and Drill Bit Size Table
Tap  Metric Drill  US Drill 

10mm x 1.25 
8.9mm 
11/32″ 
10mm x 1.0  9.1mm  – 
12mm x 1.75  10.5mm  – 
12mm x 1.5  10.7mm  27/64″ 
What size is 3/16 in MM?
Conversion table inches to mm
Dimensions — Inches to Metric  

0.188”  3/16” 
4.78 mm 
0.250”  1/4”  6.35 mm 
0.313”  5/16”  7.95 mm 
0.375”  3/8”  9.53 mm 
How many millimeters is 1 inch and 7 8?
Use a calculator to make it even quicker and avoid mathematical errors. Use 0.875 for the rest of your calculation. This means 7/8 inches is the same as 22.225 millimeters.
What is 7 16 on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements
Fraction  Decimal  Millimeters 

^{
1
} ⁄ _{ 4 } “ 
0.25  6.35 
^{
5
} ⁄ _{ 16 } “ 
0.3125  7.9375 
^{
3
} ⁄ _{ 8 } “ 
0.375  9.525 
^{
7
} ⁄ _{ 16 } “ 
0.4375 
11.1125 
•
Feb 11, 2021
How many mm is 5/8 inches?
Conversion table inches to mm
Dimensions — Inches to Metric 


0.625” 
5/8 ” 
15.88 mm 
0.688”  11/16” 
17.48 mm 
0.750”  3/4” 
19.05 mm 
0.813”  13/16” 
20.65 mm 
How many mm is a 12 inch ruler?
Inch to Millimeter Conversion Table
Inches  Millimeters 

9″  228.6 mm 
10″  254 mm 
11″  279.4 mm 
12″ 
304.8 mm 
How many mm is a inch chart?
Inches to millimeters conversion table
Inches (“)  Millimeters (mm) 

1/4 ″  6.35 mm 
1/2 ″  12.7 mm 
1 ″ 
25.4 mm 
2 ″  50.8 mm 
What are SAE sizes?
SAE stands for Society of Automotive Engineers and the sockets are typically marked in fractions of an inch, i.e., 1/2″, 3/8″, 13/16″. Metric tools are measured in millimeters and come in sizes such as 8 mm, 10 mm, 12 mm, etc.
What size bolt does a 10mm wrench fit?
Size Chart
Bolt size  Size  Tolerance 

M6 
10mm 
10.04 
M7  11mm  11.04 
1/4″UNF  7/16″  11.15 
3/16″BSW  11.34 
What are the standard wrench sizes?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
How many MM is a dime?
Coin Specifications
Denomination  Cent  Dime 

Weight  2.500 g  2.268 g 
Diameter 
0.750 in. 19.05 mm 
0.705 in. 17.91 mm 
Thickness  1.52 mm  1.35 mm 
Edge  Plain  Reeded 
•
Sep 24, 2019
How many mm is an inch exactly?
Standards for the exact length of an inch have varied in the past, but since the adoption of the international yard during the 1950s and 1960s it has been based on the metric system and defined as exactly 25.4 mm.
What nut do I need for a 10mm bolt?
A 17mm spanner hence fits a nut 17mm across its pads and this is typically a nut to fit a 10mm measurement screw (M10).
What size bolt is 10mm?
Metric Shoulder Bolt Dimensions
Shoulder Diameter (A)  Thread (C)  Head Diameter (E) 

6mm  5mm x 0.8  10mm 
8mm  6mm x 1.0  13mm 
10mm  8mm x 1.25  16mm 
12mm  10mm x 1.5  18mm 
Are M10 and 3/8 the same?
Since 10 mm is bigger than 3/8″, the simple answer is, “NO”.
Is 3/8 drill bit the same as 10mm?
3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.
What size thread is a 10mm bolt?
Metric Shoulder Bolt Dimensions
Shoulder Diameter (A)  Thread (C)  Thread Length (D) 

8mm  6mm x 1.0  11.25mm 
10mm 
8mm x 1.25 
13.25mm 
12mm  10mm x 1.5  16.4mm 
16mm  12mm x 1.75  18.4mm 
What size drill bit do I need for a 10mm Dynabolt?
Product range
Item Description  Anchor Thread Diameter (Metric)  Drill Hole Diameter 

M8 x 55mm  M8 
10 mm 
M8 x 80mm  M8  10 mm 
M10 x 59mm  M10  12 mm 
M10 x 75mm  M10  12 mm 