23mm = 29/32 inch. 24mm = just over 15/16 inch.

equally, How do I convert Imperial to metric?

How to Convert Imperial to Metric

  1. Find the right conversion number (see Metric – Imperial Conversion Charts)
  2. Multiply.
  3. If the answer is in the thousands or millions (or thousandths or millionths), then drop the zeros and use the correct prefix (see Metric Numbers)

Then, What’s equivalent to a 15 mm socket?

SAE to Metric Conversion Chart

SAE Metric Inch
19/32″ 0.594
5/8″ 0.625
16mm 0.63

Apr 29, 2020

likewise What is equivalent to a 15 mm wrench? 15mm

Bolt Diameter Wrench Size (Standard) Wrench Size (Metric)
3/8″ 9/16″ 15mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm

Feb 27, 2020

What’s equivalent to a 30 mm socket?

Wrench Size And Conversion Table

Inches Millimeters Spanner
1.063 27mm 1 1/16 AF; 27mm
1.100 5/16 Wworth; 11/16 BSF
1.125 1 1/8 AF
1.181 30mm 30mm
24 Related Questions Answers Found

How do you convert SI to Imperial?

Conversion is simply a matter of multiplying by the right number.

Example: What is 50 cubic meters (m


) in Imperial?

  1. In the chart it shows that 1 m


    = 1.3080 yd


    (cubic yards)
  2. Multiply 50 x 1.3080 = 65.4 yd

  3. Looks Good !

Does Canada use metric or imperial?

Imperial: Which is used for what measurements? Canada made its first formal switch from imperial to metric units on April 1, 1975. That was the first day weather reports gave temperatures in degrees Celsius, rather than Fahrenheit.

What is the difference between metric and imperial?

Most countries use the Metric System, which uses measuring units such as meters and grams and adds prefixes like kilo, milli and centi to count orders of magnitude. In the United States, people use the older Imperial system, where things are measured in feet, inches, and pounds.

What’s equivalent to a 10mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard. Metric sizes, also known as SI (Système International), from the French International System.

What is difference between SAE and metric?

SAE or Standard: A standard or SAE (Society of Automotive Engineers) wrench is measured in fractions of inches. … Metric: A metric wrench will work with nuts and bolts that have a metric measurement. A small metric wrench would measure about 8 mm, while a large one would be about 20 mm.

What are the wrench sizes in order?

Standard American wrench sizes, from the largest to smallest and measured in inches, are 5/8, 19/32, 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 and 1/8. Wrenches are available in a set or individually. A small set has six to 10 wrenches, ranging from 5/16 to 1 inch in size.

Should I buy SAE or metric wrenches?

Some trucks used the metric system of fasteners while some cars used both metric and SAE fasteners. … So, you don’t need to buy SAE tools to accomplish your most jobs. ​This is the reason, I mostly recommend filling up your socket set with metric tools and then choose any SAE tools if you think you need to.

What are the most common metric wrench sizes?

Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.

Is there an 18 mm socket?

TEKTON3/8 in. Drive 18 mm 12-Point Shallow Socket.

How many mm is 3/8ths of an inch?

Conversion table inches to mm

Dimensions — Inches to Metric
0.375” 3/8”
9.53 mm
0.438” 7/16” 11.13 mm
0.500” 1/2” 12.70 mm
0.563” 9/16” 14.30 mm

Are metric and SI the same?

The International System of Units (SI), commonly known as the metric system, is the international standard for measurement.

What is SI and Imperial units?

The metric system is defined as: “A decimal system of units based on the meter as a unit length, the kilogram as a unit mass, and the second as a unit time.” Today, it is commonly referred to as SI, which stands for the Système International. It is also known as the International System of Units.

Will America ever go metric?

The United States has official legislation for metrication; however, conversion was not mandatory and many industries chose not to convert, and unlike other countries, there is no governmental or major social desire to implement further metrication.

Why does Canada still use imperial?

Because most fasteners, machine parts, pumps, piping, and all building materials are sold in imperial or US customary units, many mechanical and civil engineers in Canada mainly use imperial units for these items. Overall building dimensions for new construction are usually in SI units..

Why did America not go metric?

The biggest reasons the U.S. hasn’t adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products.

Why is imperial better than metric?

Metric is simply a better system of units than imperial

The metric system is a consistent and coherent system of units. In other words, it fits together very well and calculations are easy because it is decimal. This is a big advantage for use in the home, education, industry and science.

Why does the US not use the metric system?

The biggest reasons the U.S. hasn’t adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products.

Is M10 same as 10mm?

If the size is M10 x 25, that would mean that the diameter is 10 mm. … Just remember that thread pitch means the distance between adjacent threads, so in the example at the beginning of this article, the 1.0 thread pitch indicates that the distance between one thread and another is 1.0 millimeter.

What is 10mm socket used for?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

What is a 10mm spanner in Imperial?

Spanner size chart

Inches Millimetres Spanner


0.433 11mm 11mm
0.438 7/16 AF
0.445 3/16 Wworth; 1/4