Amazon is backing Ecobee, a smart thermostat company, just days after buying Ring. Energy Impact Partners and Amazon Alexa Fund are among the investors in a $62 million round of funding for Ecobee. The deal follows Amazon’s acquisition of Ring, a maker of smart-home-security devices.

Similarly, How do I calibrate my Ecobee thermostat?

To Configure Temperature Correction
  1. Press Menu on the main screen.
  2. Go to Settings.
  3. Then go to Installation Settings.
  4. Select Thresholds.
  5. Then select Temperature Correction.
  6. Adjust the temperature reading to fit your needs.

Also, How does ecobee know when you are away? Smart Away runs until it detects occupancy or until the start of the next scheduled Away period. What temperature set points are in effect when Smart Away is running? *Actual number is based on your ecobee’s ongoing analysis of your HVAC’s equipment’s ability to recover the temperature gap.


23 Related Questions and Answers Found 💬

 

Which is better nest or ecobee?

ecobee4 Smart Thermostat with Built-In Alexa, Room Sensor Included. The Ecobee 4 is an affordable smart thermostat with Alexa built in. If you prefer the same temperature-adjustment technique used for conventional thermostats, the Nest Learning Thermostat is a good choice. The Ecobee4 utilizes a touchscreen.

Can you lock Ecobee thermostat?

If you have kids in the house and are strict about the thermostat, you can lock down your Ecobee with a PIN code so that no one can adjust the temperature except those authorized to do so. With a non-smart thermostat, you‘d usually have to get a locked enclosure to put around it, like you see in most businesses.

How do I reset my Ecobee thermostat?

1 Factory Reset
  1. From the Home screen, press Menu.
  2. Select Settings.
  3. Go to Reset.
  4. Choose Reset All Settings then confirm your selection by pressing Yes.
  5. Choose the reset option that suits your needs:
  6. The ecobee thermostat will be reset to factory defaults.

How does an Ecobee thermostat work?

ecobee knows this is the case, and one of the main functions of the room sensors is to allow the thermostat to average the temperature in your house to try and combat those hot and cold spots. Your ecobee smart thermostat will attempt to heat or cool your house to approximately 71 degrees as a middle ground.

Why does ecobee flash green?

My ecobee is flashing a green light! What do I do? This is Alexa letting you know that you have a notification. To check your notification and/or get rid of the flashing green light, just say “Alexa, what did I miss?” or “Alexa, delete all of my notifications” to your ecobee thermostat.

Can you lock Ecobee thermostat?

If you have kids in the house and are strict about the thermostat, you can lock down your Ecobee with a PIN code so that no one can adjust the temperature except those authorized to do so. With a non-smart thermostat, you‘d usually have to get a locked enclosure to put around it, like you see in most businesses.

What does holding mean on ecobee?

Whenever you manually adjust your ecobee to a different temperature that’s not the scheduled set point, your ecobee will go into a “hold.” This means instead of following your set schedule, your thermostat will follow the hold action until the hold is manually cancelled, or until your preferred hold action setting

What is ecobee Smart Recovery?

How accurate is the temperature sensor in the ecobee? The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds. It will use the previous two values and average them into the current reading.

How do ecobee sensors work?

ecobee room sensors are an additional accessory that you can pair with your ecobee smart thermostat which allows the thermostat to know the temperature of different rooms in your house. Not only do the room sensors detect temperature, but they also have motion sensors so it can tell when somebody is in that room.

How long does ecobee take to calibrate?

5 to 20 minutes

How do I turn my ecobee screen off?

On Thermostat:
  1. Select Main Menu > Settings > Preferences.
  2. Select Screen brightness.
  3. Adjust the values of the Active and Standby screen brightness.
  4. Select “Screen sleeps when I sleep” if you want to make the screen blank during the Sleep activity period.

How do you control ecobee?

ecobee3 Smart Thermostat (pictured above)

Connect the ecobee Thermostat in the SmartThings app

  1. From the Home screen, touch the Plus (+) icon and select Device.
  2. Select ecobee and touch Thermostat.
  3. Choose a Location for the device.
  4. Choose a Room for the device and touch Next.
  5. Touch Click to enter ecobee credentials.

Where should ecobee sensors be placed?

How do I connect my Ecobee thermostat to WIFI?

How do I connect my thermostat to Wi-Fi?
  1. On the thermostat, tap on the MAIN MENU > SETTINGS > WIFI to open the Wi-Fi configuration screen.
  2. On this screen, make sure Wi-Fi Radio is Enabled and tap on Network.
  3. You will have the choice of using an iOS device or manually selecting your Wi-Fi network.

How does ecobee know you are home?

Knows when you are home

The Ecobee temperature sensors, in particular, can sense if a room is occupied or not and adjust your home’s entire temperature automatically. Nest thermostats can also be linked with separate sensors.

Does ecobee learn like nest?

The biggest difference is that the Nest Learning Thermostat offers more sensors than the Ecobee Smart Thermostat, so the Nest thermostat can track a few more metrics and work a little more in the background so your climate control works seamlessly.

What is minimum fan runtime ecobee?

2. Fan minimum on time. This feature allows you to define the minimum amount of time each hour that the system fan will run. This feature is useful if you wish to circulate the air throughout your home automatically outside of heating or cooling cycles.

How does ecobee comfort settings work?

This tells your ecobee what temperature you want your home to be during your Activities. The orange number is the heat setting, and the blue number is the cool setting. Essentially, Comfort Settings are a predefined heat/cool setting that can be applied to a specific period of a day.

How do I adjust the temperature on my ecobee?

Select Main Menu > Settings > Preferences. Select Temperature display. Touch °F or °C.

Via the Web Portal:

  1. Select Settings tile.
  2. Select Preferences.
  3. Select Temperature Display.
  4. Select Fahrenheit or Celsius.

What is ecobee Smart Recovery?

1 Temperature Correction
  1. Press Menu on the main screen.
  2. Go to Settings.
  3. Then go to Installation Settings.
  4. Select Thresholds.
  5. Then select Temperature Correction.
  6. Adjust the temperature reading to fit your needs.

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.

How do I reset my Ecobee thermostat?

You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.

Why does my ecobee keep restarting?

If your ecobee thermostat is frequently rebooting, your HVAC system may be cutting power the thermostat. The most common causes of your HVAC system cutting power to your thermostat are: If your furnace overheats, this sensor will trip, causing the furnace to cut power to your thermostat.

Why does my ecobee keep restarting?

ecobee thermostats have a feature enabled called Smart Recovery. As you continue to use your ecobee, it learns how long it takes your home to get to a desired temperature. Your ecobee will take into account the performance of your HVAC equipment relative to the effects of weather on your home.

Do ecobee thermostats talk to each other?

No. All of our thermostat models are compatible with each other: If you already own an ecobee4 and are looking to purchase a new model, e.g. SmartThermostat with voice control, you won’t need to replace your ecobee4 to do so. The same goes for upgrading from an ecobee3 lite to SmartThermostat with voice control.

Can ecobee work without wifi?

The short answer is yes. Even without a Wi-Fi connection, your ecobee will still function as a traditional thermostat; it will engage your equipment as needed and maintain your comfort set points.

Why does ecobee flash green?

My ecobee is flashing a green light! What do I do? This is Alexa letting you know that you have a notification. To check your notification and/or get rid of the flashing green light, just say “Alexa, what did I miss?” or “Alexa, delete all of my notifications” to your ecobee thermostat.

How do you restart ecobee?

If it doesn’t work, restart your router by unplugging it, waiting a few minutes, then plugging back in. Once you have confirmed that the wi-fi is working for other devices, it’s time to try restarting your Ecobee. Turn it off, wait at least one minute, then turn it back on again. Allow your Ecobee to boot up as normal.

Does Ecobee thermostat have a battery?

The short answer is yes. Even without a Wi-Fi connection, your ecobee will still function as a traditional thermostat; it will engage your equipment as needed and maintain your comfort set points.

Why does my ecobee keep holding?

Whenever you manually adjust your ecobee to a different temperature that’s not the scheduled set point, your ecobee will go into a “hold.” This means instead of following your set schedule, your thermostat will follow the hold action until the hold is manually cancelled, or until your preferred hold action setting

How do I turn off ecobee Smart Recovery?

The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.