Ceiling height plays a major role in how high you should hang your curtains. It is often best to use the 4 to 6 inches above the window trim rule here unless the windows stretch close to the high ceilings. If there is little space between the trim and the ceiling, then hang the curtains from the ceiling.

Simply so, How far from the ceiling should a curtain rod be hung?

The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

How do you hang curtains from ceiling with Command hooks?

Steps
  1. Buy 2 to 3 curtain rod Command hooks that match your curtain rod.
  2. Wipe gently the wall above the window frame with rubbing alcohol, do not rub.
  3. Mark on the wall with a pencil where you want to place the Command hooks.
  4. Trim the top of the hooks down if they are too long.

28 Related Questions Answers Found

 

Can you put curtains over vertical blinds?

The NoNo Bracket is a specially engineered bracket thatallows you to easily hang curtains and dramaticallychange the look of any room. The bracket attaches to your existingvertical blind head rail with ease. Attaches to outsidemount vertical blinds. Slide the bracket over thevertical blind head rail.

How do you hang sheets from the ceiling?

Stapling the fabric along the line where the wall meets the ceiling is one of the simplest fixed hanging methods. Arrange the fabric into pleats as you staple, and then glue gimp or ribbon along the top to hide the staples. You can also hang floor-to-ceiling fabric with hook-and-loop tape.

How do you hang curtains on a concrete wall?

How to Hang a Curtain Rod on Cement Walls
  1. Position the curtain-mounting hardware on the concrete wallwhere you want it installed.
  2. Secure a carbide masonry bit in the drill.
  3. Place the tip of the bit on the reference mark that you made onthe wall.
  4. Position the curtain mounting bracket so the screw holes arealigned with the holes in the wall anchor.

How do you fix a curtain rod?

  1. Remove the curtain rod from the rod mounts.
  2. Locate the damaged drywall where the curtain rods weremounted.
  3. Tap a small plastic anchor into each hole in the drywall with ahammer.
  4. Position the curtain mount over the two anchors and insert amatching screw through the top and bottom holes of the mount intothe anchors.

How do you hang sheers from the ceiling?

Place marks on the ceiling where you want the curtain rods to hang on each side of the bed. Ask an assistant to hold the rods against the ceiling. Use a carpenter’s level to ensure the rods are straight and will hang parallel to the length of the bed. Mark the center of the rod on the ceiling.

What are drapery hooks?

How to Hang Drapery Hooks. When you need toquickly hang hemmed drapes or curtains, drapery hooksare an effective and easy-to-use option. The basic style of thiscurtain hardware staple is a single wire folded against itself– one end has a sharp prong and the other end is bent into acurved hook.

Should sheer curtains touch the floor?

Floor-length sheers should end one to two inches above the floor if they are hung beneath another curtain. However, sheers can go to greater lengths if they stand alone. For a soft and romantic look, add an additional three to four inches for “breaking” sheers, or 12 to 15 inches for sheers that puddle.

What can I use in place of a curtain rod?

Can you use Velcro to hang curtains?

How to Hang Curtains With Velcro.Sometimes, hanging curtains on a rod is not an option, suchas when you want to hang them inside a cabinet or ina rental home where holes are not allowed in the walls.Velcro, which can hold small or large curtainsalike, comes to the rescue.

Which command hook holds the most weight?

I’ve done research and found that these are thestrongest 3M Command Hooks to hold heavier objects.They can hold up to 7.5 pounds. Forget about nails, screws,tacks or messy adhesives. Command Hooks are fast and easy tohang stuff.

Do you need sheers with curtains?

Drapes are lined curtain panels. Curtains and sheers also come in panels, but they are built from lightweight fabrics, and will not filter out all of the light to darken a room. They can be hung in layers with drapes so that you can pull back the drapes to let in the light, but still have privacy.

What are Command Hooks?

Product description

Command Hooks let you hang what you want, whereyou want, without the hassle of tools and nails. CommandStrips hold strongly on a variety of smooth, finished surfaces, andthese adhesive hooks remove cleanly with no sticky residueor damage left behind.

Can you hang curtains with Command Strips?

A few simple steps will have curtains hung in no time! Use command hooks and a curtain rod with a heavy load capacity. Take a square piece of paper or cardboard and cut out a corner to match the corner of the window. Wait thirty minutes for the command hook to become secure and hang your curtains.

How much of the window should a valance cover?

For most windows, a valance should coverabout 2 to 6 inches of the top of the window andwindow frame (this is called the window overlap),with the rest of the valance covering the wall above thewindow.

How do you hang pendant lights without drilling?

How do you hang pendant lights without drilling?

What are the different ways to hang sheer curtains?

How to Hang Sheer Curtains
  1. Layer Sheers With Thicker Curtains.
  2. Hang Multiple Panels to Add Depth and Color.
  3. Create a Window Scarf.
  4. Frame Your Windows and Display a Centerpiece.
  5. Beautify Your Bedroom.
  6. Enhance a Doorway or Entryway.
  7. Combine With String Lights to Illuminate Your Windows.

How do you hang curtains on a bay window?

If your bay window has more than 3 sections, geta straight curtain rod for each window frame. If yourbay window only has 3 sections, use 1 long bay windowcurtain rod. Mount 2 curtain brackets over each sectionin your bay window. Then, put your curtains onyour curtain rods and place the rods in thebrackets.

What are the different ways to hang curtains?

There are two ways you can hang your curtains; on a track or on a rod / pole.
  1. Curtain track. A curtain track is an unobtrusive and elegant way to hang curtains, as you don’t see the track at all.
  2. Curtain pole.
  3. Rod Pocket.
  4. Curtain rings.
  5. Eyelet.
  6. Tab Top.
  7. Tie Top.
  8. Pencil pleat.

Command strips can only be applied to smooth surfaces. Avoid adhering them to brick walls, textured wallpaper, concrete or timber. Strips work best on clean, smooth surfaces, so wipe the wall with isopropyl rubbing alcohol (methylated spirits) first.

How do you attach something to the ceiling without damaging it?

Very Light Objects

Alternatively, you can tie the loose end of the string or wire around a thumbtack and push the tack into the ceiling, or simply fasten ribbons or streamers directly to the ceiling with the tack. Neither tape nor tacks leave much of a mark, so you can take the items down later without any damage.

Do Command hooks work on ceiling?

And like all Commandβ„’ Party Products, they hold strongly and remove cleanly, so you can live it up without worrying about taking them down. Now you can add some bling to your ceiling with Commandβ„’ Party Ceiling Hooks. Not recommended for popcorn or heavily textured ceilings.

Do Command hooks work on ceiling?

Using command hooks will prevent any holes or drilling in your walls. Use a command hook to hang the light fixture from the ceiling. And then swag the cord to the wall and secure in place with another command hook. Be sure to use the command hooks for the weight of your light.

How do you hang lights without drilling?

To hang your Christmas lights outside without nails, try using plastic hooks and clips for a simple way to make your home look festive. If you decide to use hooks, purchase S-shaped gutter hooks and hang them by pressing the top part of the S into the gutter.

Can multiple command strips hold more weight?

If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips.

Do Command Strips work on concrete?

If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips.

Command strips can only be applied to smooth surfaces. Avoid adhering them to brick walls, textured wallpaper, concrete or timber. Strips work best on clean, smooth surfaces, so wipe the wall with isopropyl rubbing alcohol (methylated spirits) first.