Various Types of Hinges and Where to Use Them?
  • Butt Hinge: From application ranging from doors, windows, cabinets and almost all furniture these are the most commonly used type of hinges.
  • Barrel Hinge:
  • Piano Hinges:
  • Butterfly Hinges:
  • Flush Hinges:
  • Pivot Hinges:
  • Barrel Hinge:
  • Spring Hinge:

Then, What does full overlay mean?

A full overlay is a cabinet door that covers the cabinet’s entire face frame. A full overlay fully rests on the cabinet opening when it is closed. A full overlay does not interfere with the interior space of the cabinet, which is not the case when using a half overlay or a full-inset door.

Considering this, What is standard cabinet overlay? Standard overlay cabinets (also called traditional overlay) tend to be less expensive and do not require hardware because there is enough finger space on the side of the cabinet door or drawer face. They also have more exposed face frame, with at least 1 ¼ inches on all sides of the doors and drawers.


37 Related Questions and Answers Found 💬

 

What is the difference between overlay and inset hinges?

Inset Cabinet Doors are set into the cabinet frame and fit flush with the face of the cabinet when closed. Full Overlay Doors give a similar appearance to that of inset doors without the higher cost. They completely cover the cabinet face, providing the flat cabinet front so desired in inset cabinets.

What are the different types of cabinet hinges?

  • WRAP AROUND HINGES. Full Wrap-Around: Frame wing wraps three sides of the frame and screws to the inside edge.
  • FACE FRAME (SEMI-CONCEALED) HINGES. The frame wing is visible when the cabinet door is closed.
  • SURFACE MOUNT HINGES.
  • INSET HINGES.
  • OVERLAY HINGES.
  • REVERSE BEVEL HINGES.

What is a full overlay cabinet?

A full overlay is a cabinet door that covers the cabinet’s entire face frame. Full overlays can be used on both frameless cabinets and cabinets that have a face frame.

What does variable overlay hinge mean?

One type of hinge application is an Overlay; basically an overlay means your door overlays (or overlaps) your cabinet frame. An overlay hinge can be either face mount or partial wrap. These are called Variable Overlay because your door does not have to overlap your frame by a set dimension (such as 1/2in. or 1/4in..)

How do hinges work?

A hinge is a mechanical bearing that connects two solid objects, typically allowing only a limited angle of rotation between them. Hinges may be made of flexible material or of moving components. In biology, many joints function as hinges like the elbow joint.

What is the difference between full overlay and partial overlay cabinets?

Full Overlay Doors give a similar appearance to that of inset doors without the higher cost. They completely cover the cabinet face, providing the flat cabinet front so desired in inset cabinets. Partial Overlay Cabinets are the most common and least expensive option for your kitchen.

What does half cranked hinge mean?

The door is normally the full width of the cabinet, overlaying and hiding the sides of the carcase. These hinges are sometimes called “half crankedhinges, since they move the door in a funny cranking opening pattern, and move the door 9.5 mm (about 3/8 inch) farther away from the hinge mount.

How do you measure hinges?

OPTION 1: Replace the hinges.

If you already have European-style concealed hinges on your cabinets, you can probably replace them with softclose models. Blum’s Blumotion, Salice’s Silentia, and Grass’s TEC may do the trick. Softclose pistons built into the hinge cup or onto the arm ensure a slam-free closure.

Can you put hidden hinges on old cabinets?

The secret to creating seamless, flush cabinets in your home is to use hidden hinges instead of more traditional cabinetry hardware. Also known as cup hinges or European hinges, concealed hinges install on the inside of the door.

What is a Blum hinge?

Blum Cabinet Hinges. Blum European hinges offer nickel plated steel construction and three dimensional adjustment.

How much bigger should a cabinet door be than the opening?

Add 1 inch to both the width and the height of each opening size measurement. For example, a 14″ x 30″ cabinet opening should now read 15″ x 31″. This technique allows for a 1/2″ overlay of cabinet door openings. If you order by cabinet order size alone, your doors will be too small.

Can you put soft close hinges on old cabinets?

OPTION 1: Replace the hinges.

If you already have European-style concealed hinges on your cabinets, you can probably replace them with softclose models. Blum’s Blumotion, Salice’s Silentia, and Grass’s TEC may do the trick. Softclose pistons built into the hinge cup or onto the arm ensure a slam-free closure.

How do you measure hinge overlay?

What is hinge overlay depth?

An overlay door lies “on top” of the cabinet opening (the door is larger than the opening). The overlay dimension is how much bigger the door is than the opening of the cabinet. This is measured on the hinged side of the door.

How does a hinge work?

A hinge is a mechanical bearing that connects two solid objects, typically allowing only a limited angle of rotation between them. Hinges may be made of flexible material or of moving components. In biology, many joints function as hinges like the elbow joint.

What is overlay depth?

An overlay door is a door which, when closed, lays “on top” of the cabinet opening (no part of the door goes into the opening since the door is larger than the opening). The overlay dimension is simply how much bigger the door is than the opening of the cabinet (as measured on the hinged side of the door).

Are partial overlay cabinets outdated?

Avoid: Raised panel doors and partialoverlay

Raised panel doors have been a classic look in cabinetry, but they certainly aren’t trendy at the moment. Partial overlay, which do not completely cover the frame visible in a cabinetry run, is also on its way out.

What is a Blum hinge?

Shop Blum Concealed Hinges! European Style Hinges. These are a particular type of concealed hinge that uses a hole bored into the back of the cabinet door.

How do you measure hinges?

Lay the open hinge on a flat surface. Measure the distance from one side of the hinge, across the hinge, to the other side of the hinge with a tape measure to determine the hinge width. The ordering width of a replacement hinge refers to the total open width of the hinge.

How do you measure hinges?

How many door dampers do I need to order? One soft close damper is required per door, so all you have to do is count how many doors you would like to have the softclosing feature in, and place your order accordingly. Larger, heavier doors may require 2 dampers.

What does half overlay mean?

Use screw 1 to adjust the doors from side to side. Turning the screw in a clockwise direction moves the door closer to the edge of the cabinet. You can adjust both the top and bottom hinge to move the doors closer together or further apart. If you loosen screws 2 & 4 the hinge backplate can be moved up or downwards.

What are concealed hinges used for?

A concealed hinge is one that lays flush within a cabinet door to mask the hinges location. The term concealed hinge is interchangeable with “European Style” in reference to cabinetry hinges. The purpose of the concealed hinge is to provide a smooth surface to the outer appearance of a kitchen cabinet run.

How do you install self closing overlay hinges?

  1. Step 1 – Remove Cabinet Door. Using your electric screwdriver, remove the cabinet door from the cabinet face.
  2. Step 2 – Clean Door.
  3. Step 3 – Line Up New Hinges.
  4. Step 4 – Lay Hinges on Door.
  5. Step 5 – Drill Holes.
  6. Step 6 – Install Hinges.
  7. Step 7 – Install Cabinet Door to Cabinet Face.

How do you install self closing overlay hinges?

Lay the open hinge on a flat surface. Measure the distance from one side of the hinge, across the hinge, to the other side of the hinge with a tape measure to determine the hinge width. The ordering width of a replacement hinge refers to the total open width of the hinge.

What is a semi concealed hinge?

Semi Concealed Cabinet Hinges. Semi Concealed hinges are made to be used with face frame cabinetry. Styles vary from butt hinges to a commonly used variable overlay and they come in an array of finishes to coordinate with existing or new cabinet decorative hardware.

How soft close hinges work?

The “self” element means that the hinge or slide has a built-in element that pulls the drawer or door closed, sometimes with a tap or bang. “Soft“-closing means just that it glides. The drawer or door is pushed and it glides to a certain point and then hydraulics take over.

What are the different types of cabinet hinges?

  • WRAP AROUND HINGES. Full Wrap-Around: Frame wing wraps three sides of the frame and screws to the inside edge.
  • FACE FRAME (SEMI-CONCEALED) HINGES. The frame wing is visible when the cabinet door is closed.
  • SURFACE MOUNT HINGES.
  • INSET HINGES.
  • OVERLAY HINGES.
  • REVERSE BEVEL HINGES.

What is a self closing hinge?

Selfclose hinges are a type of hinge that has a spring built into it so when you start to close a cabinet door, the spring, at some point, takes over and pulls the cabinet door closed with a tap.

How do you adjust hinges?

The “self” element means that the hinge or slide has a built-in element that pulls the drawer or door closed, sometimes with a tap or bang. “Soft“-closing means just that it glides. The drawer or door is pushed and it glides to a certain point and then hydraulics take over.

How do you inset a door hinge?

Steps
  1. Place your hinges in the correct location. Assuming you’re installing a new door, you’ll need to find the precise location on the door frame for your hinges.
  2. Trace around the hinge.
  3. Cut the mortise.
  4. Mark the location of the screws.
  5. Drill the pilot holes.
  6. Install the individual hinges.
  7. Connect the door to the jamb.

How does a full overlay hinge work?

Use screw 1 to adjust the doors from side to side. Turning the screw in a clockwise direction moves the door closer to the edge of the cabinet. You can adjust both the top and bottom hinge to move the doors closer together or further apart. If you loosen screws 2 & 4 the hinge backplate can be moved up or downwards.