Sales Unit Metre
345 kgs/m3
Width 89 mm
Length 2,400 mm
Thickness 38 mm

Also, How do you work out m3 of timber?

To calculate cubic Metres of timber accurately, use the nominal values for width and thickness of the timber, not the actual size. Nominal = size of a piece of timber before the timber is dressed. Lineal Metres x nominal width x nominal thickness = cubic Metres.

Hereof, What size is CLS timber?

CLS Timber (derived from Canadian Lumber Size), though used for the same application as a Scant, has a smaller radius on each of the four corners, making it both thinner and narrower. The finished size of a 50 x 75mm piece of CLS timber is 38 x 63mm.

Also to know What does CLS timber mean? CLS Timber – “Canadian Lumber Size” or CLS is finished on all sides giving a smaller cross-section than traditional sawn timber. Originating in the Canadian market, hence the name it is mainly used for timber frame home construction and for internal and partition walls.

Can I use CLS timber outside?

Can CLS Timber Be Used Outside? CLS timber should only be used outside if it has been treated, in order to ensure it is suitably resistant to external climate conditions that can cause issues such as rot and decay.

19 Related Questions Answers Found

What is a lineal metre of timber?

An example of a product which can be measured as a linear metre is buying fencing which is usually priced in linear metres, not square metres whereas a product such as timber flooring is normally priced in square metres. A linear metre is a single length measurement, and a metre is also a single length measurement.

How much wood is 1m3?

The difference to note is weight: the average density of UK hardwoods is about 700kg per solid cubic metre whilst the average density of softwoods is about 500kg per solid cubic metre. This means that you need about 1.35 cubic metres of softwood to be the equivalent of 1.0 cubic metre of hardwood.

How do you calculate decking timber?

First you need to work out your square meters. You do this by taking the length and width of your decking and times them by each other. To find out how many lineal meters you need, take your square meters and divide it by the width of the decking boards.

What size is 4×2 CLS timber?

These are available in 38mm x 89mm and 38mm x 63mm and in 2.4 and 3 m lengths.

What size is 4 by 2 timber?

4×2 Timber lengths

3.6 metres x 100mm x 47mm.

What does Finished size mean timber?

Finished size = size after planing/machining. Cover = actual width a rebated/T&G board covers.

What sort of timber will last outdoors?

The most commonly used type of outdoor wood is treated, specifically pressure treated pine or fir, cheaper and more readily available than untreated Redwood or Cedar, treated wood does have some drawbacks. It can be expensive.

Is Studwork timber strong?

The CLS timber falls into the easy-edge C16 timber. … The easy-edge CLS wood timber is widely used in framing. As mentioned earlier, the C24 is high-quality, and it is a little bit more expensive than the C16 grade. It is stronger and suitable for various structural purposes.

How strong is C24 timber?

C16 or C24 Timber

Strength Class C16 C24
Compression parallel to grain (N/mm2)

Compression perpendicular to grain (N/mm2) 2.2-1.7 2.4-1.9
Shear parallel to grain (N/mm2) 0.67 0.71
Modulus of elasticity mean (N/mm2) 8,800 10,800

How long will CLS timber last outside?

It’s not water resistant so the wood will still absorb water, swell and deteriorate. It’s supposed to last for up to 40 years but I’ve had posts lasting less than 10 years.

How long will C24 timber last outside?

In general, we say that the inside of the wood should be protected for about 60 years, and the outside for about 30 years. This is without any extra treatment, staining, or painting on your behalf.

How do you calculate timber?

FBM = (0.199 x diameter in inches²) – (0.642 x diameter in inches); Standardized taper of 0.125“ is used to calculate log segments. Each segment consists of 4′ cylinders and the result of the segment is rounded to the nearest 5 FBM (157.3 ~ 155 FBM, etc.)

How big is a lineal metre?

A carpet lineal metre is usually 3.66m (the width of the carpet), a price in lineal metres will be higher than in square metres (please note that some of our carpets are 4 metres wide).

What’s the difference between lineal and linear?

Lineal describes a quantity of material that has an implied width dimension, and linear describes a distance irregardless of width.

How much is 3 cubic Metres of wood?

m3 is the abbreviation for a cubic metre. So a 3m3 load is equivalent to a thrown pile of firewood 3 metres long, 1 metre tall and 1 metre deep. For those of you more familiar with the old cord measurement, a cord is officially 3.6 cubic metres so our 3m3 load is a little less than a cord of firewood.

How much is a ton of wood UK?

Average prices for hardwood cordwood at the moment is approx £65/£70 per tonne delivered (based on approx 25t load), depending on species and location.

How do I calculate my decking?

To start, measure the length and width of your area. If it is not a simple rectangle or square, try and split the area down into more than one rectangle or square, taking the length and width of each part. To work out how many square metres you have to cover, multiply the length by the width.

How do you calculate lineal metres?

Using a tape measure measure the length of your area followed by the width, making sure you make a note of the measurements in centimetres (cm) /andor meters (m), for example 3 metres 55 centimeters, or 355cm or 3.55m. You then multiply the length of the area by the width to give a square metre (m2) total.

What are standard timber sizes?

Timber is sold in various lengths that are multiples of 30cm (apx a foot). Most common are 1.8m, 2.4m & 3m (apx 6′, 8′ & 10′). Several longer sizes are also sold. (Note that the metric equivalent lengths are very slightly shorter than the imperial.)

What’s the difference between CLS and C16 timber?

CLS timber comes in two grades – C24 and C16. Both of these woods typically resemble each other in appearance, but the C24 grade is stronger. C16 graded CLS timber is better suited to indoor construction such as creating partitioning and internal walls.

What is s4s timber?

Scant timber is produced from kiln dried spruce (whitewood), planed and finished with eased edges to precise tolerances and is graded C16. Scant timber is recognised as a cheaper timber hence it is usually used for hidden work.”