Display shows β€œE3” Manual Reset overheat protection has triggered. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating.

Similarly, How long do electric fireplaces last?

10-20 years

Also, What does e5 mean on my electric fireplace? An E5 error code indicates that there is an issue with your fan or venting. If your fan is not coming on, then you have an issue with voltage or there is something that is not allowing the fan to spin freely. A common solution for this is to first unplug the water heater from its electrical supply.


25 Related Questions and Answers Found πŸ’¬

 

Why is my electric fireplace not working?

Electric Fireplace Won’t Turn On

Now, check for faulty wiring. Some electric fireplaces have a built-in fuse box (refer to owner’s manual). Replace any burnt out fuses if applicable. When the remote doesn’t work (and the batteries aren’t dead of course), the problem usually lies with the circuit board.

What does ER mean on my electric fireplace?

If the Duraflame cord is like,not plugged all the way into the outlet SNUGLY-THEN the blinking ER (when the outlet ,or Duraflame plug) will show again if it overheats , or gets really warm.

Why does my electric fireplace not turn on?

Fireplace Fails to Turn on

Electric fireplaces are turned on by an on/off switch located on the wall or fireplace unit and a remote control. In certain cases, the electric voltage from the power outlet that the fireplace is plugged into does not supply enough electricity to power the device.

How long do electric fireplaces last?

10-20 years

Why is my electric fireplace overheating?

A restricted airflow is one of the main causes of overheating in an electric fireplace. Electric fireplaces need sufficient airflow to operate, and a blocked or partially blocked inlet to the fireplace will quickly prevent cooling of the heating element, causing it to become too hot to work safely.

How do you clean an electric fireplace?

Dust the Interior

Dust may accumulate inside your electric fireplace, like any other unit in your home. To remove any dust, simply use a clean, dry cloth to wipe down the interior. Gently dust any media such as logs or glass inside your electric fireplace as well.

How do you clean an electric fireplace?

Clean the Heater

With a clean, dry cloth, wipe down the surface of the heater. Using the soft brush attachment of a vacuum cleaner, gently clean the heater outlets. This will remove any dust or debris from the heater and keep it running at top performance.

Can you put an electric fireplace under a TV?

How do you fix a Dimplex electric fireplace?

How do I Troubleshoot a Dimplex Electric Fireplace?
  1. Confirm that the fireplace is installed on the electrically appropriate circuit.
  2. Replace the remote if the unit comes on independently without your having turned it on.
  3. Check the power supply if the unit will not come on when you press the remote.
  4. Evaluate the appearance of the flame.

What is SpectraFire?

SpectraFire – The SpectraFire flame technology offers a very realistic flame appearance. Such colors combinations include: Traditional, SpectraFire (Traditional w/ blue hue), Indigo, Violet and Blue. The flame appearance is bright with a highly representative pattern sequence.

How do you start a Heat N Glo fireplace?

Pilot Lighting Instructions for Heat-N-Glo Gas Fireplaces
  1. Locate gas supply valve (typically behind louvers, below glass opening – may be red or blue).
  2. Open valve by pivoting handle to be parallel to gas line.
  3. Locate pilot assembly with spark ignitor (located behind and below logs in the firebox – typically in the bottom center).
  4. Then locate red or black ignitor button.

How much will an electric fireplace raise my electric bill?

The average electric fireplace uses nearly 1500 watts of power. If you use it just for ambiance, then the cost can range anywhere from $0.003 to $0.03 per hour. However, if you use a heating unit as well, the costs will go up to around $0.09 per hour for a medium setting, and $0.18 per hour for the maximum setting.

How do you turn on an electric fireplace?

How do you turn on an electric fireplace?

Push button A to turn electric fireplace on, power icon on front screen will turn yellow, the flame effect will come on when the electric fireplace is on. Push button A again, power icon will disappear, no flame effect. This electric fireplace is equipped with a thermostat.

Why does my electric fireplace keep shutting off?

Common faults of an electric fireplace

The first cause that is common on most of the electric fireplaces is the lack of enough airflow through the unit. If the air flowing into the unit is insufficient, it is definitely going to shut off in an attempt to prevent a potential fire.

Why is my electric fireplace clicking?

Like a space heater, your electric fireplace could produce a clicking noise when turned on initially. This noise is often the result of the heating coils expanding. Troubleshoot your fireplace and make any necessary repairs if the sound persists.

How do you fix a Dimplex electric fireplace?

How do I Troubleshoot a Dimplex Electric Fireplace?
  1. Confirm that the fireplace is installed on the electrically appropriate circuit.
  2. Replace the remote if the unit comes on independently without your having turned it on.
  3. Check the power supply if the unit will not come on when you press the remote.
  4. Evaluate the appearance of the flame.

Can electric fireplaces cause fires?

When compared to gas and wood-burning fireplaces, electric fireplaces are often the safest option and eliminate many potential safety worries. Failure to do so can lead to carbon monoxide poisoning and house fires, both serious safety hazards that can result in illness, injury and even death.

How do I find my Dimplex model number?

The product model number can be found on the top of the unit, on the right hand side, behind the control unit.

Can you put an electric fireplace under a TV?

Then, you heat only the room that is occupied. This concept reduces the use of wasted energy and could save you up to 10% on your energy bills. Electric fireplaces also save you from costly chimney cleaning, service checks, and installation fees.

Should an electric fireplace be on its own circuit?

Most electric fireplaces can be plugged into a standard 120 Volt outlet, and no dedicated circuit is required.

Does an electric fireplace use a lot of electricity?

Typical Electricity Usage

Electric fireplaces use only about 1,500 watts of electricity. Operational costs range between 0.003 to 3 cents per hour when you use them strictly for decorative purposes — that is, the flames are activated but no heat is produced.

Does an electric fireplace use a lot of electricity?

A TV may be placed above most electric fireplaces, without any adverse effects to the TV. Since most electric fireplaces blow heat out the front or bottom of the unit, they create no problems for TV’s or any other items that may be placed above the fireplace.

How real do electric fireplaces look?

Electric fireplaces that feature logs do a great job of simulating a real fire. The logs and embers built into our electric fireplaces are hand molded and hand painted. They produce impressive, realistic flames, a β€œsmoke” effect, as well as a pulsating glowing ember effect.

Can you roast marshmallows on an electric fireplace?

Appearance: Electrical fireplaces don’t really look like fireplaces. Some may have false flames to create the illusion of a wood fireplace. Enjoyment: You can‘t roast marshmallows. Nor can you smell the wood or hear the flames.

How do you clean a Dimplex electric fireplace?

  1. Turn off and unplug the fireplace.
  2. Remove the log set from the fireplace and set it aside.
  3. Dampen a soft cloth with warm water and wring it out.
  4. Dry the inside of the fireplace with a clean, soft cloth.
  5. Spray the inside of the glass with glass cleaner.
  6. Place the log set back into the fireplace and plug it in.

How do I program my Dimplex remote?

Press and hold the manual selection switch (FIGURE 10 –E) for five seconds (β€œ I ” position) UNTIL the second red indicator light flashes. 5. Press ON button located on the remote control transmitter (FIGURE 11). This will synchronize the remote control transmitter and receiver.

Do electric fireplaces save on heating bills?

Appearance: Electrical fireplaces don’t really look like fireplaces. Some may have false flames to create the illusion of a wood fireplace. Enjoyment: You can‘t roast marshmallows. Nor can you smell the wood or hear the flames.

Then, you heat only the room that is occupied. This concept reduces the use of wasted energy and could save you up to 10% on your energy bills. Electric fireplaces also save you from costly chimney cleaning, service checks, and installation fees.