Kilopascal (kPa), one thousand times the unit of pressure and stress in the metre-kilogram-second system (the International System of Units [SI]). It was named in honour of the French mathematician-physicist Blaise Pascal (1623–62).

Also, Is ATM the same as kPa?

A kilopascal is equal to 1000 pascals. Another commonly used unit of pressure is the atmosphere (atm). Standard atmospheric pressure is called 1 atm of pressure and is equal to 760 mmHg and 101.3 kPa. Atmospheric pressure is also often stated as pounds/square inch (psi).

Accordingly, What TYRE pressure is 240 kPa?

Looking for tyre pressure Data/Charts? If so Click here

13 0.9 220
14 1.0 230
15 1.0 230

What is kPa suction power? Suction Pressure (Water Lift or Sealed Suction)

Typical domestic vacuum cleaners can create a suction of 20 kPa. Pascal is a measure of pressure that equals to a pressure of 1 newton of force per square meter of area. 20 kPa would be 20000 N/m2 or around 2 tons per square meter, or around 200 cm (80 inches) of water.

What should tire pressure be at kPa?

One thing that is important for proper driving conditions is proper tire inflation and pressure. The ideal range of pressure in cars is between 193-234 in kPa (kilopascal) or 28 to 34 psi (pounds per square inch). However, in heavier cars, such as minivans, the pressure can be higher, upwards to 303 kPa (44 psi).

18 Related Questions Answers Found

How do you calculate kPa?

1 kPa = 760/101.325 = 7.5 mmHg; atm = atmosphere; kPa = kilo Pascal; mmHg = millimetres of mercury.

How do you solve for kPa?

Example #3: Convert 0.955 atm to kPa. Solution:

multiply the atm value by 101.325 kPa / atm


Here they are:

  1. atmospheres (symbol = atm)
  2. millimeters of mercury (symbol = mmHg)
  3. Pascals (symbol = Pa) or, more commonly, kiloPascals (symbol = kPa)

What pressure in ATM is equivalent to 118.2 kPa?

Atm to Kilopascal Conversion

1 Atm (atmospheric pressure) is equal to 101.325 kilopascal (kPa). To convert atm to kPa, multiply the atm value by 101.325.

Is 36 psi too high?

Higher pressure generally is not dangerous, as long as you stay well below the “maximum inflation pressure.” That number is listed on each sidewall, and is much higher than your “recommended tire pressure” of 33 psi, Gary. So, in your case, I’d recommend that you put 35 or 36 psi in the tires and just leave it there.

What TYRE pressure is 220 kPa?

For example, to convert 220 kPa to psi, multiply 220 by 0.14503773779, that makes 31.9 psi is 220 kPa.

How do you calculate kPa pressure?

Kilopascal (kPa) is a frequently used pressure unit and equals to 1000 newton per square meter (metre).

  1. 1 kPa = 0.00986923 atm → kPa to atm.
  2. 1 kPa = 0.01 bar → kPa to bar.
  3. 1 kPa = 0.01019716213 kg/cm² → kPa to kg/cm²
  4. 1 kPa = 0.001 MPa → kPa to MPa.
  5. 1 kPa = 1000 pascals → kPa to pascal.
  6. 1 kPa = 0.145038 psi → kPa to psi.

What vacuum has the strongest suction?

The best vacuum with good suction that we’ve tested is the Miele Complete C3 Alize PowerLine. This canister vacuum is exceptionally good at cleaning bare floors, where it easily sucks up pet hair and debris like rice and cereal.

Which handheld vacuum has the strongest suction?

Buying Options. *At the time of publishing, the price was $90. The Black+Decker 20V Max Lithium Pivot BDH2000PL has more suction than any other cordless handheld vacuum we tested (apart from a super-expensive Dyson, now discontinued).

Is Bissell better than shark?

When it comes to the capacity of their respective canisters, Shark models are hands down the better choice of the two. That is, because, while the capacity of a Bissell dirt canister ranges between 0.11 and 0.52 gallons, a Shark’s dirt canister can hold between 0.6 and 1.1 gallons of dirt.

Is 25 psi too low for tires?

The low tire-pressure warning light will display when the tire’s air pressure is 25 percent below the automaker’s recommended PSI. A 25 percent reduction in tire pressure is considered severe. So take the low-tire pressure warning as the warning it is!

Is 30 psi enough for tires?

There is a tire pressure marking on the sidewall of your tires, but this isn’t the optimum air pressure for your tires, it’s the maximum. … For everyday use, most passenger cars will have a recommended or optimum pressure of 30 or 32 PSI.

At what PSI will a tire explode?

The burst pressure of a tire is about 200 psi. So unless you had your tires pumped up to 195 psi (trust us, you didn’t), you didn’t come anywhere near bursting the tire from too much internal pressure.

How many kPa are there?

pascal to kilopascals Conversion Chart Near 0.4 pascal

pascals to


1 pascal = 0.001

1.1 pascals = 0.0011

1.2 pascals = 0.0012

1.3 pascals = 0.0013


What is a kPa rating?

When compared to bar unit there is 100 kPa in 1 bar which happens to be very close to the standard atmospheric pressure at sea level (101.325kPa), therefore a reading in kPa closely represents the same value as the 0 to 100 percentage scale of atmospheric pressure. …

What is kPa in KG?

1 Kilopascal (kPa) is equal to 0.01019716213 kilogram force per square centimeter (kg/cm2).

Is PV nRT in Kelvin?

Kelvin degrees: the only REAL degrees. Q: When making calculations using the ideal gas law: PV=nRT, do you express the temperature in Celsius or in Kelvin? Neither.

What is a pressure of 2.7 atm equal to in kPa?

Atm to kPa Conversion Chart Near 1 atm

Atm to kilopascals Conversion Chart
2.7 atm
274 kilopascals
2.8 atm 284 kilopascals
2.9 atm 294 kilopascals
3 atm 304 kilopascals

What pressure in kPa is equal to 3.5 atm?

3.5 atm equals 354.6375 kPa.

Where is 103 kPa converted to ATM?

Convert 103 Kilopascals to Atmospheres

103 Kilopascals (kPa)
1.016531 Atmospheres

1 kPa = 0.009869 Atm 1 Atm = 101.325 kPa

Tagged in: