Power Failure

Then, Why is my Whirlpool Cabrio dryer not starting?

There are several common situations whereby a Whirlpool Cabrio dryer will not start. They include problems with the power supply, incorrect settings selected on the control panel, or issues with the dryer’s setup. Troubleshooting your Whirlpool Cabrio will take about 15 minutes.

Considering this, Where is the error code on a Whirlpool Cabrio dryer?

Whirlpool Cabrio dryer error codes
  1. AF. Exhaust air flow restriction. Check/ Repair.
  2. PF. Power failure. Check/ Repair.
  3. F-01. Main electronic control board failure. Check/
  4. F-02. User interface keypad failure. Check/
  5. F-22. Exhaust thermistor failure. Check/
  6. F-23. Exhaust thermistor failure. Check/
  7. F-26. Drive motor failure. Check/
  8. F-28. Moisture sensor failure. Check/

21 Related Questions and Answers Found 💬

 

What does sensing mean on a Whirlpool Cabrio dryer?

One of the features of the Duet series of dryers is automatic dryness sensing. All Whirlpool Duet dryers have sensor strips in the drum. As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry.

What does l2 mean on a Whirlpool dryer?

The fault code “L2” on the display of a Whirlpool-brand dryer indicates an electrical problem, specifically a problem with the power supply to the heating element. This may prevent the dryer from heating up to dry clothes.

What does AF mean on a Whirlpool Cabrio dryer?

AF or F4E3. Restricted air flow. It indicates that the lint screen or vent is clogged; the vent is crushed, kinked or has too many turns. The dryer will continue to run when the is error is present.

Why is my Cabrio dryer squeaking?

If your dryer is making a squeak, squeal or ear piercing noise, it’s highly likely you need to replace your idler pulley . This is a very common issue and very easy to fix. Most dryers, you’ll remove the front of the dryer, have to take out the drum and do a whole bunch of other stuff to get to the idler pulley.

What does PF mean on my Whirlpool oven?

The “PF” indicates a power failure. This would be normal to happen when the circuit breaker was flipped OFF and back ON. The “Clock” must be set before all the other functions will be available. You will need to press “Clock” and set the clock and your oven should operate normally.

What is wrong with my dryer it wont turn on?

If your dryer won’t start, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. Open the dryer door and check if the light inside the dryer turns on. If it doesn’t turn on, check your power cord and the house circuit breaker.

What does PF mean on Maytag dryer?

power failure

Do all tumble dryers have a reset button?

Touch the left multimeter lead to the left side of the thermal fuse; touch the right multimeter lead to the right side of the fuse. Keep an eye on the multimeter needle; a needle that fails to move indicates a blown thermal fuse. If this is the case, don’t fret: thermal fuse replacement is a simple task.

How do you run a diagnostic on a Whirlpool Duet dryer?

How to Enter Whirlpool Duet Dryer Diagnostics
  1. Check that your Whirlpool Duet dryer’s power cord is plugged completely into a working outlet.
  2. Locate the “More Time” and “Less Time” push buttons on the control console.
  3. Press and release the buttons in the following sequence within five seconds: “More Time,” “Less Time,” “More Time” and “Less Time.”

How do you diagnose a dryer problem?

Problem: Dryer Won’t Start
  1. The door latch may not be engaging. Check the latch for lint and clean it completely so that the door closes properly.
  2. Check the power supply, including fuses and circuit breakers.
  3. Check the dryer’s internal thermal fuse.
  4. If you have a push start knob, it may not be engaging correctly.

What causes a dryer to not come on?

A thermal fuse is a heat-sensitive fuse attached to your dryer’s exhaust duct (in most models) that is designed to blow if the dryer overheats. A blown fuse would cause your dryer to not heat, or to not work at all. Open up your dryer’s cabinet and locate its thermal fuse.

How do you reset a dryer fuse?

How to Reset a Thermal Fuse
  1. Unplug the clothes dryer’s power cord from the wall outlet.
  2. Swing the front panel out towards you so that you can look into the compartment.
  3. Aim a flashlight at the flat-can-like component to locate the blown thermal fuse.

Does a Whirlpool dryer have a reset button?

How do you clean the lint on a Whirlpool Cabrio Platinum dryer?

How to Clean Lint Out of a Whirlpool Dryer
  1. Grab the lint screen and pull it up and out of the lint catcher in either the door or the top of a Whirlpool dryer.
  2. Roll the lint from the lint screen with your fingers.
  3. Wet the screen with hot water.
  4. Rinse the screen and dry it thoroughly with a towel or allow the screen to air dry.

How do you fix the start button on a dryer?

Instructions
  1. Shut off the power. Unplug the dryer.
  2. Pull the knob off. Pull the control knob straight up and off of the front of the push-to-start switch.
  3. Remove the back panel.
  4. Remove the push-to-start switch.
  5. Install the new push-to-start switch.
  6. Reattach the back panel.
  7. Reinstall the control knob.
  8. Restore power to the dryer.

What does error code f01 mean on Whirlpool dryer?

The whirlpool Cabrio dryer F01 error means the main control has an internal failure. This can happen at any time when a component on the control board has failed but most commonly this happens when your home has a power surge and shorts the main control board.

Can you reset a thermal fuse?

You can‘t reset the thermal fuse; if it’s blown, replace it with the manufacturer-approved replacement part.

Where is the dryer reset button?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

How do you reset a dryer fuse?

How to Reset a Thermal Fuse
  1. Unplug the clothes dryer’s power cord from the wall outlet.
  2. Swing the front panel out towards you so that you can look into the compartment.
  3. Aim a flashlight at the flat-can-like component to locate the blown thermal fuse.

Do all tumble dryers have a reset button?

When a clothes dryer doesn’t heat the air but its drum rotates, something has interrupted the heat source. With an electric clothes dryer, no heat often means that the circuit breaker or fuse that controls the power has blown; reset or replace it. Be aware that a dryer may have two breakers or fuses.

Where is the reset button on a Kenmore Dryer?

A dryer’s drying time is largely related to the flow of air through the machine and the condition of the venting hose. If air is impeded in its pathway out of the dryer, or if there is a blockage in the venting hose, it could reduce the rate at which clothes are drying in your dryer.

What does it mean when your dryer says f01?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.

Why did my Whirlpool dryer stop working?

The thermal fuse is the most common problem with Whirlpool dryers not running. The vent being stopped normally causes dryers to overheat. So if your thermal fuse is bad you should check the vent. To check the thermal fuse, first unplug dryer and remove back.

Why did my Whirlpool dryer stop working?

In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click.

How do I know if my dryer vent is clogged?

How To Tell If Dryer Vent Is Clogged
  1. Excess Dry Times. One of the first signs that your dryer vent is clogged is when your clothes are no longer fully drying during a regular dry cycle.
  2. Burning Smell. Have you noticed a burnt odor coming from your dryer whenever you have a load going?
  3. Hot Exterior.
  4. Sizable Lint.

Why the dryer is not working?

Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.

How do you fix a dryer?

Replace the bad heating element on an electric dryer by unscrewing the retaining clip at the top of the heater box. Then pull out the box and remove the element retaining screw. Swap the elements and reinstall. If you have an electric or gas dryer that tumbles but won’t heat, check the thermal fuse for continuity.

Do all tumble dryers have a reset button?

In some models this should be easily fixable – some tumble dryers have reset buttons on the back of the machine so all you will need to do is hold in the button and wait for it to click.

Why is my dryer taking forever to dry clothes?

Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.

Can I bypass the thermostat on my dryer?

The idea would be to bypass the thermostat, hi-limit or thermal cutoff one at a time and see if the dryer will heat. Then carefully plug the dryer in and run it to see if it will heat. If it heats the thermostat is the problem. If it doesn’t heat then the thermal cut-off and hi-limit can be checked the same way.

Can you run a dryer without a thermal fuse?

A dryer’s drying time is largely related to the flow of air through the machine and the condition of the venting hose. If air is impeded in its pathway out of the dryer, or if there is a blockage in the venting hose, it could reduce the rate at which clothes are drying in your dryer.