power failure

Keeping this in consideration, What does PF on an oven mean?

The “PF” indicates a power failure. This would be normal to happen when the circuit breaker was flipped OFF and back ON. The “Clock” must be set before all the other functions will be available. You will need to press “Clock” and set the clock and your oven should operate normally.

Also know, What does Fe mean on my LG dishwasher? LG dishwasher error code FE. If the LG dishwasher is displaying the FE error code, it means a filling problem is detected, so the pump is turning on and draining the water. The worn drain pump seal.

24 Related Questions Answers Found


How do I reset my Whirlpool Cabrio Top load washer?

How To Reset Whirlpool Cabrio Washer:
  1. Turn the washer off.
  2. Set the mode selector dial to NORMAL.
  3. Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
  4. Now press the start button.

What does PE mean on LG washer?


What does lf mean on a Kenmore washer?

long fill

What does f1 mean on a dryer?

Definition. The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.

Is there a reset button on my LG washer?

Perform hard reset

Unplug the washer. release, then hold down the PLAY/PAUSE button for 5 seconds. Plug the unit back in, if the unit does not power ON, it will require a repair service.

How do you clear the error code on a Whirlpool Cabrio washer?

How to Reset a Whirlpool Cabrio
  1. Touch any key on the display pad to clear the error code, if applicable, or press “Pause/Cancel.”
  2. Choose a new cycle and press “Start” to begin.
  3. Turn off and disconnect the Cabrio if the error or problem persists.
  4. Wait several minutes before restoring power.
  5. Contact Whirlpool for assistance if the unit will not reset.

How do I reset my LG washing machine?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

What does AF mean on a Kenmore Series 700 dryer?

How do I fix f1 error on Frigidaire oven?

When an F1 error occurs, the display flashes the code and beeps at the same time. To stop the flashing and beeping, press the “Cancel” button. Try the bake or broil feature once more, and if the error code repeats, unplug the appliance and wait five minutes before plugging it back in.

What does f1 mean on my Maytag washer?

F1 – Defective touch Pad or Control Board (Clock) – Replace either touch pad, control board, or both if one assembly.

How do I reset my Kenmore Ultra Bake Oven?

How to Reset a Kenmore Elite Stove Oven
  1. Press the “7” button on the Kenmore Elite keypad.
  2. Continue holding the “7” button for at least six seconds until a single beep sounds.
  3. Press the “Start” button on the keypad once. This will reset the oven back to the factory default settings.

Why is my Kenmore front load washer not draining?

If the washer won’t drain there might be a clogged pump or hose. It’s common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Cleaned the filter and the machine still will not drain. So that must mean the hose or pump is clogged.

What does loc mean on a Kenmore oven?

oven lock out feature

How do I drain my Kenmore Elite washer?

How to Manually Drain Water From a Kenmore Washing Machine
  1. Pull the washer away from the wall until you have enough room to access the back panel of the machine.
  2. Place the bucket behind the washer next to the drain hose.
  3. Unhook the drain hose from the drainpipe.

How do you reset a Frigidaire oven?

Clean all contact areas on the lid and the washer. Try unplugging the washer to allow the control panel to reset. Plug the washer back in and see if the problem resolves.

Lid Lock Issues

  1. Press/hold for 3 seconds.
  2. Release for 3 seconds.
  3. Press/hold for 3 seconds.
  4. Release for 3 seconds.
  5. Press/hold for 3 seconds.
  6. Release.

How do you reset a Frigidaire oven?


How do you reset a Whirlpool stove?

Reset power to the product:
  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Monitor the oven/range for one (1) minute to ensure the error code does not display again.
  4. Verify oven operation.

How do I troubleshoot my Kenmore washer?

  1. Washer will not stop when the lid is open. Bad lid switch.
  2. Water will not drain out of the washer. Clogged waste hose. Bad drain pump. Bad pump motor.
  3. Washer does not spin/agitate. Broken drive belt. Bad tub motor.

What is code f21 from a washer?

The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.

What does PF mean on a KitchenAid oven?

Power Failure

What does f01 mean on Hotpoint washing machine?

To reset the unit, locate the circuit breaker to the unit and turn it OFF and back ON. To test the cooktop: Press the ON/OFF button to one of the elements. Press the + key to set the highest temperature.

How do you reset a Kenmore Elite he3 dryer?

To reset, unplug for 5 minutes. In another section for the same situation you say to hit the stop button 2x n then the power button. My he3 has no stop or power button. To re-set the motor on a newer washer, unplug then plug the machine back in again.

What does PF mean on my Samsung washer?

The PF error code indicates a power failure. This may occur if the power supply to the washer is interrupted during a cycle from power outage. To fix this: Simply restart the washing cycle process.

What does PF mean on my Samsung washer?

How to Reset a Frigidaire Oven
  1. Press and hold the “Bake” button for six seconds until “0°” appears in the display.
  2. Enter the lower temperature at which you want to reset the oven.
  3. Press “Self Clean” to reset the oven’s internal temperature to a cooler setting.

How do you turn on a Frigidaire oven?

2. Push and hold the UP or DOWN ARROW until the desired baking temperature appears in the display. 3. As soon as the UP or DOWN ARROW is released, the oven will begin heating and the fan inside the oven will turn on.

What does PF mean on a Frigidaire dishwasher mean?

power failure

How do I reset my Kenmore front load washer?

How to Reset a Kenmore 3.5 Capacity Washer
  1. Turn off and unplug the machine.
  2. Unlock the control panel by simultaneously pushing and holding down the Options and Select button for 10 seconds if you see a lock icon on the control display.
  3. Push whichever new options you need, and wait for the control panel to flash and reset the washer’s options.

How do you reset error f21?

Reset. When the “F21error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water.

How do I reset my LG electric stove?

power failure

What is F Code on Whirlpool Cabrio washer?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

What does f01 mean on a Whirlpool dryer?

To reset the unit, locate the circuit breaker to the unit and turn it OFF and back ON. To test the cooktop: Press the ON/OFF button to one of the elements. Press the + key to set the highest temperature.