The most likely dangers of using it too thick are cracks (see photo), delamination, and lippage. Please note that the thinset being shown as a patch in the previous pictures is one designed to be used on plywood (an ANSI A118. 11 mortar). If you try to do that with an el-cheapo thinset, good luck.

Then, How big should grout lines be for 12×24 tile?

Grout line guidelines

Regular – 12 X 12 up to 16 X 16 inches square. Large format tile – 18 X 18 inches and larger.

Considering this, What size trowel should I use for 12×24 tile? All tile manufacturers offer a recommended trowel size. Mosaic installations up to 2 inches can use a 1/8-inch notch, as can wall tiles of up to 4 inches, as a general rule. 16-inch tiles need a 1/2-inch-deep notch, and anything over 24 inches should use a …


24 Related Questions and Answers Found 💬

 

What happens if Thinset is too thick?

The most likely dangers of using it too thick are cracks (see photo), delamination, and lippage. Please note that the thinset being shown as a patch in the previous pictures is one designed to be used on plywood (an ANSI A118. 11 mortar). If you try to do that with an el-cheapo thinset, good luck.

What size spacers should you use for subway tile?

Most subway tile has grooves on the sides so you don’t need to use spacers at all because it’s an automatic 1/16″ grout line. I completely forgot about that and used 1/8″ spacers. This meant that we ended up with pretty wide grout lines.

How thick can Thinset be under tile?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

How big should grout lines be for 12×24 tile?

Finished grout lines will vary from 1/16″ to 3/16″. Note that using the smallest grout possible will increase installation time. 3/16″: We recommend a 3/16″ grout size for our Ceramic Tile line. This thickness leaves room for the natural variation in size, and the perfectly imperfect edges of handmade tile.

What size tile spacers do I need?

The general rule is to use tile spacers of 2 – 3mm for a ceramic wall tile installation and tile spacers of 5mm for a ceramic floor tile installation, but there are numerous factors that can influence the size of the tile spacers you use. Porcelain, granite and marble tiles are generally installed with a 3mm spacer.

What size tile spacers do I need?

The general rule is to use tile spacers of 2 – 3mm for a ceramic wall tile installation and tile spacers of 5mm for a ceramic floor tile installation, but there are numerous factors that can influence the size of the tile spacers you use. Porcelain, granite and marble tiles are generally installed with a 3mm spacer.

How thick can Thinset be under tile?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

Should you back butter tile?

For Versabond thinset, the recommended trowel size for a tile where the longest side of tile is less than 8″ use 1/4″ x 1/4″ x 1/4″ (6 x 6 x 6 mm) Square-Notch. The recommended type of trowel is usually listed on the adhesive package.

What size notched trowel for 18×18 tile?

While a 12-inch tile can use a 1/4-by-3/8-inch trowel, an 18-inch tile must use a full 1/2-inch trowel. If full mortar coverage is not seen on the tiles, the tiles must be back-buttered — that is, the mortar applied directly to their backs. Voids beneath an 18-inch tile could cause the tile to crack over time.

Should you back butter tile?

Although it’s recommended for natural stone tile, it’s not always necessary or required to get adequate mortar coverage on ceramic and porcelain tile. So, how important is it? Back butter is defined as, “the spreading of a bond coat to the backs of ceramic tile just before the tile is placed.”

Can you lay wood look tile without grout?

However, with woodlook tile, you really don’t want the grout to steal the show—you want it to disappear. Since hardwood floors don’t have much of a joint, you don’t want your tile to either.

Can I tile over self leveling compound?

Start with a flat floor

Selfleveling compound gives you a flat, smooth base for tile. It’s also a fast way to embed in-floor heating mats or cables. deep, screed thinset over them to create a flat surface. For really bad floors, selfleveling compound (also called “selfleveling underlayment”) is a lifesaver.

How do you install mosaic floor tile sheets?

Can I tile over self leveling compound?

Start with a flat floor

Selfleveling compound gives you a flat, smooth base for tile. It’s also a fast way to embed in-floor heating mats or cables. deep, screed thinset over them to create a flat surface. For really bad floors, selfleveling compound (also called “selfleveling underlayment”) is a lifesaver.

How much thinset do I need for porcelain tile?

Amount of Thinset Needed

A 120 square foot room with 16-inch tiles will take a minimum of three bags of thinset. Divide the square footage of your project by 95 (the maximum coverage of a 50-pound bag of thinset. For example, a 10-by-12-foot room is 120 square feet; divided by 95, the result is 1.26.

Can I use mosaic tile on the floor?

Mosaic Tile Flooring. Mosaic tile is manufactured by adhering ceramic or natural stone pieces onto a mesh backing. Mosaic tiles may be applied to both walls and floors, and they are an excellent choice for areas that may get wet, such as kitchens and baths, because the surface does not become slippery.

How thick should tile mortar be?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

How much thinset do I need for porcelain tile?

Amount of Thinset Needed

A 120 square foot room with 16-inch tiles will take a minimum of three bags of thinset. Divide the square footage of your project by 95 (the maximum coverage of a 50-pound bag of thinset. For example, a 10-by-12-foot room is 120 square feet; divided by 95, the result is 1.26.

What size notched trowel for 6×12 tile?

What Size Trowel to Use for Tile
3/16″ to 1/4″ V-notch = Mosaics tiles up to 4-1/2″ glazed wall tile
1/4″ x 1/4″ U or Square notch = 4″ to 8″ tile
1/4″ x 3/8″ U or Square notch = 8″ to 16″ tiles
1/2″ x 1/2″ U or Square notch = 16″ and larger

Should you back butter tile?

1/16″

What is a tile trowel?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.

What size notched trowel for 3×6 tile?

For Versabond thinset, the recommended trowel size for a tile where the longest side of tile is less than 8″ use 1/4″ x 1/4″ x 1/4″ (6 x 6 x 6 mm) Square-Notch. The recommended type of trowel is usually listed on the adhesive package.

Can you lay wood look tile without grout?

Grout can take a tile and elevate it to something unique. However, with woodlook tile, you really don’t want the grout to steal the show—you want it to disappear. Since hardwood floors don’t have much of a joint, you don’t want your tile to either.

Can you lay wood look tile without grout?

Although it’s recommended for natural stone tile, it’s not always necessary or required to get adequate mortar coverage on ceramic and porcelain tile. So, how important is it? Back butter is defined as, “the spreading of a bond coat to the backs of ceramic tile just before the tile is placed.”

How much space do you need for Thinset?

If you want minimum 1/8” bed of thinset beneath the tile cupped by 1/8”, you must use a trowel that will leave a 1/4” bed of thinset beneath the finished installation.

What is the difference between sanded and unsanded grout?

Unsanded grout should be used in joints that are less than 1/8-inch-wide. It has a smooth texture and clings well to vertical surfaces, which makes it useful for grouting ceramic wall tiles. Sanded grout should be used for flooring and wall tile joints wider than 1/8 inch because it resists shrinkage and cracking.

What size notched trowel for 20×20 tile?

I use a 3/8″ trowel for 12″ tiles and move up to a 1/2″ trowel around 16″, depending on the flatness of the floor and tile. I’ll also use my 3/4″ U-notch for tile up around 20″ or when the floors are very bad.

What size notched trowel for 18×18 tile?

While a 12-inch tile can use a 1/4-by-3/8-inch trowel, an 18-inch tile must use a full 1/2-inch trowel. If full mortar coverage is not seen on the tiles, the tiles must be back-buttered — that is, the mortar applied directly to their backs. Voids beneath an 18-inch tile could cause the tile to crack over time.

How thick should floor tile mortar be?

Unsanded grout should be used in joints that are less than 1/8-inch-wide. It has a smooth texture and clings well to vertical surfaces, which makes it useful for grouting ceramic wall tiles. Sanded grout should be used for flooring and wall tile joints wider than 1/8 inch because it resists shrinkage and cracking.

What size should grout lines be?

As a general rule, floor tiles should have grout lines of 1/8 inch or larger, depending on the type and size of tile; most floor tiles are 8 inches by 8 inches, but larger versions are available. Special types, such as slate or quarry tiles, often do not have edges uniform enough to look good with tight spacing.

What is the difference between sanded and unsanded grout?

The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.