YES. Silicone is highly heat resistant. It doesn’t start losing it’s shape until a stunning 600 degrees, higher than any vapor is going to get in your pipe. That said, your lighter IS going to get hotter than 600 degrees, so don’t put your pipe in direct contact with flame.

Then, Are silicone pipes better than glass?

With water filtration very similar to most glass pipes, this is a perfect addition to any smoking collection. A benefit of silicone is that it can take a while to get dirty. The material is usually quite opaque which means there will never be discoloration, but this can lead to a lower quality flavor.

Considering this, How do you clean silicone Bongs? How to clean silicone bong freezer is super easy! Simply throw your silicone pipe in the freezer for a few hours, letting all the gunk get good and frozen on the sides, and then bend and manipulate the pipe to force the gunk out.

31 Related Questions and Answers Found ?


What is salt and rubbing alcohol used for?

Just scrape off the bulk of the resin and then drop it into a Ziploc baggie with 90-100% isopropyl alcohol for a good three-hour soak. You can also use a bit of non-iodized salt as an agitator for a faster cleaning. If you add salt, you may not need to let it soak for long at all.

Do nectar collectors waste wax?

Efficient. The efficiency of a nectar collector is beyond words. With the famous, tip, dip and sip, simply do those 3 procedures to smoke your wax. The good thing is you don’t waste any wax because once you heat it up, you can put the tip right into the concentrate.

How do you clean a dab pipe?

Steps to Clean a Dab Rig
  1. Preparation: Using a stove, kettle, or microwave, heat up about 2 cups of water.
  2. Adding Liquid: Carefully add warm water to the piece, or if following the intermediate or advanced methods then add the ISO and some rock salt.
  3. Shake it up: Covering the mouthpiece and nail space, shake vigorously!

What chemical will dissolve silicone?

Vinegar and isopropyl alcohol will also do this. The best way to remove silicone caulk short of using a digestant is to treat it with a silicone sealant remover, WD-40, vinegar or alcohol, wait for it to soften and then attack it with a knife or paint scraper.

Can you dab out of silicone containers?

There are multiple uses of this silicone dab container. One way to use it is for storage only. If you own a nectar collector portable dab rig, you can take dab hits out of your silicone container because it’s heat resistant.

What can I use to remove silicone residue?

How to Remove Silicone Caulk Residue
  1. Use a razor blade to scrape off as much of the residue as possible without scratching the surface you are cleaning.
  2. Apply mineral spirits or denatured alcohol.
  3. Brush away any bits that “pill” and become detached.
  4. Repeat this process until all the caulk residue is removed.

Are acrylic bongs bad for you?

Maybe you‘re like me and keep smashing your glassware. So are acrylic bongs safe to use? For the most part, yes. Acrylic, as it turns out is less toxic than most water bottles as it doesn’t contain harmful BPA nor does it release any harmful chemicals unless it’s heated above 300°C (572°F).

How do you reclaim smoking?

Once you get the hang of the above, a quick cleaning can be done in 10 minutes (minus drying time if you wash the removable components). I recommend doing a quick cleaning like this once a month or at the very least once every 3 months, depending on how often you use your grinder.

Do you put water in a silicone DAB rig?

Using a Silicone Dab Rig is very easy. First you want to add water to the base so that when you‘re dabbing, there’s water filtration. Next, make sure your down stem is inserted. After that, you want to place your male titanium, quartz, or ceramic domeless nail in the female joint.

Can you clean silicone with hydrogen peroxide?

Hydrogen peroxide and bleach are both oxidants, a type of compound that excels at this task. Just remember to wash your stain-free spatulas in warm soapy water before use. JUST CLEAN: Soap washes away oil but not colored stains.

How do I get the most Kief out of my grinder?

After every two or three full chambers of bud, you’re going to want to leave the grinder in the freezer for about five minutes. Take it out and give it a good slam on a hard surface to knock any stuck kief off of the screen. This prevents your screen from becoming clogged and helps with the kief collecting process.

How do you clean a piecemaker pipe?

The answer is simple… some rubbing alcohol and some granular salt in a large Ziploc bag, place the Peace Maker Kazili in the bag and close it. Shake it up for about a minute…. Pull out your freshly cleaned pipe.

Is silicone a glass?

What is the best way to clean silicone?

Method 1: You will need some warm water, a bit of dishwashing detergent, and a soft bristled brush. Mix together the soap and the water, then dip your wristband in the water for a few minutes. After soaking, remove the bracelet and gently scrub the silicon with the soft brush.

Can you clean silicone with vinegar?

Silicone caulk has an odor that resembles vinegar because, like vinegar, it contains acetic acid. Consequently, white vinegar is another solvent you can use to soften it. Rubbing a tabletop exposed to silicone wax with vinegar may safely remove some of the silicone.

What is a silicone pipe?

Silicone Pipes

Make the switch to a silicone bong or handpipe! Silicone pipes are not only nearly indestructible but come in a wider variety of colors and are much easier to clean than traditional smoke tools – most silicone products are even dishwasher safe!

How do you clean a silicone smoking pipe?

How To Clean Silicone Pipes
  1. Remove glass from product and clean separately.
  2. Apply generous amounts of cleaner to the inside of product. Give the bottle a solid squeeze and allow the silicone cleaner to grab on to the the sides of your product.
  3. Wait 5 minutes.
  4. Scrub your product.
  5. Thoroughly rinse your product.
  6. Dry your product.

Do silicone pipes smell?

The smell that can develop from using your Silicone Bong or Hand Pipe over time can be very un-pleasant and something that all of us at the shop have experienced with Silicone.

Can I use rubbing alcohol to smooth silicone caulk?

100% silicone caulk has great adhesion and flexibility, making it the best choice for caulking around a bathtub, but it’s so sticky it can be hard to spread out evenly. The trick is to use ethyl alcohol (rubbing alcohol might also work) when you smooth the caulk bead. Let the area where you are working dry completely.

How do you reclaim smoking?

If you have a three or four piece grinder, keep it together and place it in the freezer for 20-30 minutes, this will help loosen the ground flower from the teeth and other metal parts.

Can you take a grinder on an airplane?

Are silicone bongs dishwasher safe?

The cleaners used for glass bongs can also clean silicone bongs. Always ensure that you rinse the silicone bong thoroughly after cleaning it. You can also use your dishwasher to clean your silicone bong. However, it is advisable that you put it in the dishwasher by itself without mixing it with your dishes.

Are metal pipes safe?

that being said, metal pipes are not dangerous to smoke from. they wouldn’t sell them if they were. people have been using metal for longer than they’ve been using glass. A simple glass or metal pipe is safe and not too expensive.

Are metal pipes safe?

Reclaim is mainly found at the base of the drop down, right below the nail. In this way, you can keep your bubbler clean longer. To collect reclaim from a drop down, simply heat the accessory with a flame torch and leave it on a silicone pad, reclaim will slowly drip on it.

How do you clean a rubber pipe?


Some elbow grease and a mild soap with some water will do wonders. Being non stick, silicone doesn’t hold onto the oils that your glass hand pipe or water pipe will have burned onto the surface.

How long do silicone bongs last?

When it comes to a silicone bong, if you choose the right one, it can last you many years. So, if it is a matter of paying $20 more for a bong that you know is absolutely safe to use, that you plan on having for 5 or even 10+ years, it is absolutely worth it.

How do I get the residue out of my grinder?

The kief in the grinder will be removed by the alcohol. Once you have let it sit for a bit, you can take the alcohol and pour it in to a Pyrex dish. Let the alcohol evaporate in the dish until all that’s left is the kief from the grinder. Scrape it up and you can top a bowl off with it or just smoke it straight.

How do you clean a mesh grinder?

Extremely gently use a non-sharp-edged Cleaning Tool (i.e. toothbrush) over your paper plate to get and save as much kief off the screen as possible. Do not risk tearing or denting the kief screen. Soak each grinder piece in a glass container full of the rubbing alcohol for 5-10 minutes.

Are acrylic grinders good?