Samsung washer error code 3E. When the 3E error appears on the display, the washing stops. The process does not resume until the fault code’s eliminating. This code corresponds to a tacho sensor error – a weak or missing signal.

Hereof, What is e3 error in Videocon washing machine?

What does the error code means and how to fix it?
New Code Old Code Cause
OE OF E3 Overflow error
t1 ee2/t2 tSt Appliance in test mode
SUD (sometimes misread as 5UD) This occurs when too much foam is detected and is displayed whilst foaming is being removed.
tE EC Temperature sensor issue

How do I reset my Whirlpool front load washer? Unplug the washer for 30 seconds to attempt to reset the Duet washer control. You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off.


20 Related Questions Answers Found

 

What does Fl mean on a washing machine?

Samsung Front Load Washer Fault Codes
Fault Code Washer Problem
LO or FL Door lock error
ds Door is not locked
dc Unbalanced load
Sud (F70) Too many suds

What is e4 error in air conditioner?

E4 Error Code

The E4 display is not actually an error code, but indicates that the air conditioner has entered defrost mode. This occurs when the unit detects ice on the evaporator which located behind the front grille. Once defrosted, the air conditioner will resume normal operation.

What does it mean when my Whirlpool washer says LF?

Whirlpool washer error code LF indicates a LONG FILL. NO WATER IS DETECTED entering the washing machine. The error code LF relates to WATER FLOW ISSUES. This means a problem occurs because WATER IS NOT PROPERLY SUPPLIED to the washer.

How do I remove my inlet screen from my washing machine?

Remove the water inlet screens with your finger or a pair of needle-nose pliers. Brush out any dirt or grit. You can soak the inlet screens in a mild solution of water and vinegar if they are calcified. Insert the clean water inlet screens back into the inlet valves on the washer.

Can you reset a Whirlpool washing machine?

How do I reset my Whirlpool washing machine? Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. The motor has now been reset and is ready for you to start a cycle.

Can I reset my Whirlpool washer?

How do I reset my Whirlpool washing machine? Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. The motor has now been reset and is ready for you to start a cycle.

What does f5 and e3 mean on a washing machine?

@back2me3 the F5 E3 alert indicates there is an issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.

What does f5 mean on a washer?

What is FL code on Samsung washer?

The FL error code indicates a faulty door lock assembly. The door lock will attempt to close 7 times before the error code pops up in the display. Opening the door and removing the metal spring around the door gasket. You can use a putty knife or flat head to remove the spring.

How do I reset my Kenmore Elite washer?

How to Reset a Kenmore Elite HE Washer
  1. Press the “Stop” button twice, and then press the “Power” button.
  2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
  3. Press the “Start” button to complete the reset process and restart the washing machine.

What does f6 mean on a Whirlpool washing machine?

The F6 error code for this model indicates a drive motor tachometer error. The control board is unable to properly detect the motor speed.

How do you clear the error code on a Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What does f5 and e2 mean on a washing machine?

The Cabrio Washer F5E2 error code means the lid lock will not lock or the lock assembly has failed. This error can happen if the lid is not closed all the way due to some type of interference.

What does f8 mean on washer?

– The error code F8 E3 means there is too much water in the machine which also means the water will not drain out. – The F8 E3 error code will display when there is excess water in the tub.

How to Reset a Maytag Washer
  1. Press the “Power/Cancel” button.
  2. Push the appropriate button to choose a new cycle.
  3. Press “Start/Pause.” You have now reset your Maytag washer.

3. Is the drain hose kinked or clogged? If the black drain hose on the rear of the washer is kinked or clogged, then F9 E1 will be displayed. You can make a quick visual check of the drain hose for any kind of obstruction.

How do you clear the codes on a Whirlpool Cabrio?

How to Reset a Whirlpool Cabrio
  1. Touch any key on the display pad to clear the error code, if applicable, or press “Pause/Cancel.”
  2. Choose a new cycle and press “Start” to begin.
  3. Turn off and disconnect the Cabrio if the error or problem persists.
  4. Wait several minutes before restoring power.
  5. Contact Whirlpool for assistance if the unit will not reset.

What does error code LF mean on a Maytag washer?

LF in the display

When “LFis displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

What does Ld mean on a Maytag washer?

Maytag bravos washer error code ld. LD stands for β€œlong drainingβ€œ. This error code appears when the machine is too slow to get the water out oft he tub. Most likely, it is a drain pump problem.

How do you reset a washing machine?

How do I reset my Maytag washer?

Top Load Washer – Hydrowave Motor Reset
  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
  3. The motor has now been reset and is ready for you to start a cycle.

How do you fix the LF code on a Kenmore Elite washer?

LF in the display

Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.

How do I fix the code on my Whirlpool Duet washer?

LF in the display

When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.

How do you reset a Cabrio washing machine?