The principle of a BoilerMate 2000 is to separate the heat generator e.g. a boiler from heat emitters (radiators) by a thermal store, which evens out the fluctuating demands for heating and hot water. This is achieved by passing the mains water through a plate heat exchanger.

Then, How long does an indirect water heater last?

15 – 20 years

Considering this, How do I connect my boiler to my indirect water heater? In a typical arrangement, a closed-loop water pipe connects the boiler to the indirect water heater, feeding heated water to it. Though the boiler-fired water never mixes with the water in the storage tank, it circulates through the coils in the heat exchanger, which in turn heat the water for household use.


21 Related Questions and Answers Found 💬

 

What is a thermal store cylinder?

A thermal store cylinder is a way of storing and managing renewable heat until it is needed. These cylinders incorporate thermal storage technology, providing mains pressure heated water that is suitable for use with a range of heat sources.

How do thermal store cylinders work?

A thermal store works at mains pressure

It differs from a conventional hot water cylinder as the stored water is not fed to the taps directly from the thermal store. Instead, it is heated up by passing through a plate heat exchanger that transfers heat from the thermal store water to the mains or tap water.

What is a Boilermate 2?

BoilerMate II. A central heating and mains pressure. hot water supply system incorporating a thermal store.

How long does an indirect water heater last?

An indirect heater can handle that high flow rate without reducing the temperature or flow. And, depending on the size of your boiler, it can do it while delivering almost limitless hot water. Better tankless heaters have efficiency ratings in the 80 – 95% range but typically last just 15 – 20 years.

What is the difference between direct and indirect fired boilers?

Direct Fired” means just that; the burner is fired directly into the process air stream to heat it. “Indirect Fired” means that the air is heated “indirectly”; the burner is fired into a heat exchanger.

How do thermal store cylinders work?

A thermal store works at mains pressure

It differs from a conventional hot water cylinder as the stored water is not fed to the taps directly from the thermal store. Instead, it is heated up by passing through a plate heat exchanger that transfers heat from the thermal store water to the mains or tap water.

How much does it cost to install an indirect hot water heater?

Indirect Water Heater Installation Costs

Indirect water heaters cost $800 to $1,500 on average. An extremely efficient choice, they use a tank that pulls heat from a boiler or furnace rather than having an independent heat source.

What is a indirect hot water system?

An indirect hot water cylinder typically uses an external energy source, such as a traditional central heating boiler or a solar thermal system, which is fed into the cylinder via a coil or heat exchanger which then ‘indirectly’ heats the hot water.

How much does it cost to install an indirect hot water heater?

Indirect Water Heater Installation Costs

Indirect water heaters cost $800 to $1,500 on average. An extremely efficient choice, they use a tank that pulls heat from a boiler or furnace rather than having an independent heat source.

What is a indirect hot water system?

An indirect hot water cylinder typically uses an external energy source, such as a traditional central heating boiler or a solar thermal system, which is fed into the cylinder via a coil or heat exchanger which then ‘indirectly’ heats the hot water.

Are the water heater and furnace connected?

Tank-type water heaters: Tank water heaters have been the standard choice for heating water for many years. The heat source can be electricity, natural gas, propane or fuel oil. In an immersed coil installation, the hot water tank contains a heat exchanger that is connected to a furnace, boiler, or heat pump.

What is the difference between a direct and indirect water heater?

Who makes the best indirect water heater?

Top 9 Best Indirect Water Heater Reviews in 2020
  • Heat-Flo HF-40 Indirect Water Heater.
  • Rheem HP40RH HP-40-Super Efficient Electric Water Heater.
  • General Electric GEH50DFEJSR Hybrid Water Heater.
  • Rheem MR50245 Marathon Tall Electric Water Heater.
  • Westinghouse Electric Water Heater.
  • EZ Supreme Tankless Water Heater.

What is the difference between a direct and indirect water heater?

A direct fired water heater can be heated by propane, oil, or natural gas and has it’s own burner. They are more energy efficient than an indirect water heater because it heats the water itself. Indirect water heaters rely on the furnace or boiler to supply the heat needed for the water.

Who makes the best indirect water heater?

Top 9 Best Indirect Water Heater Reviews in 2020
  • Heat-Flo HF-40 Indirect Water Heater.
  • Rheem HP40RH HP-40-Super Efficient Electric Water Heater.
  • General Electric GEH50DFEJSR Hybrid Water Heater.
  • Rheem MR50245 Marathon Tall Electric Water Heater.
  • Westinghouse Electric Water Heater.
  • EZ Supreme Tankless Water Heater.

How does an indirect heating system work?

Indirect Boiler System

It is heated directly by the boiler. Indirectly, it heats the water in the cylinder. The coil, or “heat exchanger” forms part of the central heating circuit, and its water heating abilities are purely a by-product of its main function, which is to heat the radiators.

How big of an indirect water heater do I need?

A 30 gallon indirect heater would be enough hot water for 12-14 people because a boiler consumes so many BTUs and heats to such high temperatures, that it can easily keep up with demand as it occurs. Boiler and indirect heater are truly ‘unlimited’ hot water. Water over 135° poses extreme danger of scalding.

What brand of water heater is the most reliable?

The Most Reliable Water Heater Brands On The Market
  • Rheem Water Heater.
  • A.O. Smith Water Heater.
  • Bradford White Water Heater.
  • Rinnai Water Heater.
  • Ecosmart Tankless Water Heater.
  • GE GeoSpring Water Heater.
  • Stiebel Eltron Water Heater.
  • Bosch Water Heater.

What does indirect cylinder mean?

Indirect cylinders are the opposite of direct. They do not heat the water directly. The main provider for heating the water inside the cylinder comes from an external source.

Do indirect water heaters save?

Indirect water heaters take advantage of an existing heating source for power, thus they can save a lot of money over the long run. They need less maintenance than a direct model due to having fewer parts, and often have superior insulation negating the need for a water heater blanket.

Do indirect water heaters save?

What does indirect cylinder mean?

Indirect cylinders are the opposite of direct. They do not heat the water directly. The main provider for heating the water inside the cylinder comes from an external source.

What is indirect water?

Indirect water supply. An indirect water supply system is the most common type found in modern houses. It’s usually located where the rising mains enters the house, often under the kitchen sink. Draincock – this allows the rising main within the house to be drained down at the lowest point.