Unit weight or density of different construction materials are tabulated below.

Ad S.No. Construction Materials Density (Kg/m


44 Lime mortar 1760
45 Concrete (P.C.C)
46 Concrete (R.C.C) 2500
47 Steel 7850

Sep 27, 2016

Also, What is density of SDBC?

Bituminous concrete or DAC as it is called is a dense asphaltic material having very little or no voids and its density is around 2.36 g/cc, is impervious top layer while Semi dense concrete or SDAC as it is called is open textured material with voids and is composed of large size 20 mm aggregates and little of sand in …

Hereof, How many bricks are in 1m3?

Regarding this, “how many bricks in 1 cubic meter?”, its depends on size of bricks, its application and manufacturer, generally there are 500 bricks in 1 cubic meter.

Also to know What is the density of RCC and PCC? Concrete density kg/m3: Density of reinforced cement concrete (RCC) is 25 Kn/m3 or 2500 Kg/m3 and plain cement concrete (PCC) is 24kn/m3 or 2400 kg/m3 which is approximately equal as 156lb/ft3.

What is density of steel?

The density of steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m3 (484 and 503 lb/cu ft), or 7.75 and 8.05 g/cm3 (4.48 and 4.65 oz/cu in).

21 Related Questions Answers Found

What is DBM in civil engineering?

Dense Bituminous Macadam (DBM) is a binder course used for roads with more number of heavy commercial vehicles and a close-graded premix material having a voids content of 5-10 per cent.

What is BC and SDBC?

BC- Bituminous Concrete. SDBC- SemiDense Bituminous Concrete.

What is the density of bitumen macadam?

It is about 2,300~2,400 Kg per cubic meter.

How much is 1m3 in Kg?

1 m3 / cu m = 1,000.00 kg wt.

Is 1m3 equal to 1000 Litres?

1 cubic meter is 1000 liters. The simplest way to convert cubic meters to liters is to move the decimal point three places to the right. In other words, multiply a value in cubic meters by 1000 to get the answer in liters.

How do you calculate 1m3?

The formula of cubic meter for measuring different units

  1. Meter = l × b × h = cubic meters.
  2. Centimetre = l × b × h ÷ 10,00,000 = cubic meters.
  3. Millimetre = l × b × h ÷ 1,00,00,00,000 = cubic meters.
  4. Inches = l × b × h ÷ 61,023.8 = cubic meters.
  5. Feet = l × b × h ÷ 35.315 = cubic meters.

How do you calculate RCC density?

Density Calculation Steps

  1. Weigh the container with the concrete (2) – record value to nearest tenth of a pound.
  2. Subtract the empty container weight from the full container weight (2) – (1) = weight of concrete (3)
  3. Divide the weight of concrete by the known volume (3) / (4) = density, or fresh unit weight.

How do you calculate density?

The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimetre.

How do you find density of steel?

We calculate the density of metal by dividing the mass of the object by its volume. Suppose the mass of the object is 7.952 pounds and its volume is 28 cubic inches then its density would be 0.284 per cubic inch.

How do you find the density?

The formula for density is the mass of an object divided by its volume. In equation form, that’s d = m/v , where d is the density, m is the mass and v is the volume of the object. The standard units are kg/m³.

What is PQC?

Pavement Quality Concrete (PQC) is a cement concrete made with large size aggregates in accordance with IRC specifications and laid over a dry lean concrete sub-base. This construction is used specifically for highway concrete pavements and for airport runway pavements as it can take heavy loads.

What is DBM full form?

dBm stands for decibel milliwatts. dBm can be used in radio, microwave, and fiber-optical networks as a measure of absolute power because of its capability to express both very large and very small values in short form. The closer the number is to 0, the better off your signal strength is.

What is the size of GSB?

GSB :- Granular sub base or GSB is a typical layer adopted in highway construction, which is laid above the subgrade and below the crust materials. Naturally available material consisting of various grades may be used for GSB, the largest grain size up to 65mm.

What is difference between BM and DBM?

It is better to use impervious DBM to ensure better performance rather than the BM. DBM will also have more structural strength compared to open graded BM (in foreign countries the structural strength of BM type open graded mix is considered about half of DBM type dense mix).

What is the difference between DBM and BC?

Dense Bitumen Macadam (DBM) Bituminous Concrete(BC)

What is Macadam?

1. a macadamized road or pavement. 2. the broken stone used in making such a road.

Is code a BM?

Bermuda is officially assigned the ISO 3166-1 alpha-2 code BM.

What is the density of WMM?

GSB WMM Crushed Mix Stone Aggregate for Paths

Bulk Density
1520 to 1680 Kg/ Cubic m
Usage/Application Driveways, Paths, Borders, Landscaping, Ground Cover, RMC
Water Absorption 2.4%
Specific Gravity 2.4 to 3

How many kg is 1m3 of cement?

conversion result for Portland cement:
From Symbol Result
1 cubic meter m3 =


How many m3 are in a tonne?

1 ton (40 cubic feet) = 1.133 cubic metres. 1 cubic metre = 0.883 cubic tons (35.32 cubic feet)