The difference between the 380 and 360 pool cleaners is that the 380 runs on a booster pump and the 360 does not.

Similarly, What is the difference between Polaris 280 and 380?

The Polaris 280 comes with 2 jets nozzles while the Polaris 380 has 3 jets nozzles. Another difference, the Polaris 280 is operated by gears while the Polaris 380 is driven by a belt. Gears can make it harder to maintain your cleaner, at least for some pool owners.

Also, How do you rebuild a Polaris 280?

How To Rebuild A Polaris 280
  1. Turn off the booster pump and remove the cleaner from the water.
  2. Mark the position of the head float on the feed mast then remove the head float.
  3. Next, remove the bag from the head of the cleaner.
  4. Makes sure to mark the position of the sweep hose adjustment screw with a marker before removing it.

32 Related Questions and Answers Found 💬

 

Why does my Polaris 280 float?

Leaks in the Polaris hose cause the cleaner to lose pressure, allowing it to float above the pool bottom. Remember that it is normal for a small amount of water to trickle from the connections made between hose sections.

What does a Polaris do?

Polaris Pressure-Side Pool Cleaners for Inground Pools. They work in any type of inground pool. They’re also powered by your return jets, but some require a booster pump to provide optimum water pressure. These cleaners feature small water jets that create a vortex which pulls debris up into the filter bag on top.

How do you adjust a Polaris pressure relief valve?

It can be manually adjusted by screwing it in our out of the wall fitting housing. Screwing it all the way in give the Polaris the maximum amount of pressure and speeds it up, unscrewing it will relieve the pressure and slow the cleaner down. Pressure Relief Valve, black spring holder.

How does the Polaris 280 work?

The 280 is a pressure side cleaner, which means it’s powered by water being pushed back into the pool as part of the water circulation system. Pressure side cleaners don’t put extra strain on your pool equipment, but they often require a booster pump to make sure there’s enough pressure to move the cleaner.

How does a Polaris backup valve work?

When the Polaris 360 gets stuck in a corner or otherwise hampered by objects in the pool, the sweep’s backup valve frees it. The backup valve fires a burst of high pressure water from its nozzle, which propels the pool sweep backwards, enabling it to continue cleaning the pool.

How long should my Polaris hose be?

Sizing the Hose

It should be 6″ long or short of the farthest point. Measure the excess and remove the entire hose from the pool. The leader hose attaches to the cleaner head. It must be sized to the depth of the pool.

Where is the model number on a Polaris Sportsman 500?

It is stamped on the frame of your ATV.
  1. On vehicles from 1997 and newer, the VIN is 17 digits.
  2. For SPORTSMAN 400, 450, 500, 570, 800 and ETX models; 2013 HAWKEYE models and SPORTSMAN 6×6 models from 2011-14, the VIN can be found on the left rear frame.

Can you leave a robotic pool cleaner in the pool?

Once installed, your pool pump pushes water through a hose to jets located underneath the pool cleaner and along the sweep hose. These concentrated streams of water work to move the cleaner along while also loosening debris and pushing it up into the filter bag.

How often should I run my pool vacuum?

Vacuum your pool at least once a week – maybe twice. Again, this depends on how much errant debris you’re collecting from trees and swimmers. Vacuuming makes it easier to control the pH level, so it’s important to be sure to vacuum frequently enough to avoid debris decay on the bottom of your pool.

What is the best Polaris pool cleaner?

The Best Polaris Pool Cleaner
  • The Best Polaris Pool Cleaner.
  • Polaris Sport F9550 Robotic In-Ground Pool Cleaner.
  • Polaris Vac-Sweep 380 Pressure Side Pool Cleaner.
  • Polaris Vac-Sweep 65 Pressure Side Automatic Pool Cleaner.

How do I know which Polaris pool cleaner I have?

The newer Polaris cleaner models have the serial number stamped on a sticker on the back of the cleaner. If the serial number starts with a “K” it will be a 380, if it starts with “C” it will be a 280, if it starts with a “L” it will be a 360.

Is it better to run a pool pump at night or day?

Is It Better To Run Your Pool Pump At Night Or During The Day? Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up. Your pool is more vulnerable during the day, plants don’t grow at night the way they do during the day–that’s true of ALL plants including Algae.

How long do Polaris pool cleaners last?

Why is my Polaris not moving?

Check The Drive Belts

Sometimes the drive belts which control the wheels and allow them to turn break and cause your Polaris to stop moving. If the Back-Up Valve is working, and the tail is moving back and forth, but the wheels are not turning, you should open up the cleaner and inspect the belts.

How do I fix Polaris backup valve?

How to Troubleshoot a Polaris 360 Backup Valve
  1. Run the swimming pool and lift the portion of the Polaris house containing the backup valve out of the water.
  2. Shut the pool off and unscrew the backup valve body to disassemble it.
  3. Spray the backup valve mechanism with water from a water hose to clean debris off of it.
  4. Place the mechanism in the backup valve case.

How often should you run a pool vacuum?

You should allow the vacuum to run until it has cleaned the entire pool, including the bottom and the sides. This averages between two and six hours. The better your pool has been maintained — for example, if you vacuum every week — the less time it takes.

What is the difference between Polaris 280 and 360?

The main difference between the Polaris 280 vs 360, is that a Polaris 280 requires a booster pump, while the Polaris 360 can be used in pools without a booster pump. If you currently have a suction vacuum, both of these cleaners will not work unless you modify the pool equipment.

How much does a Polaris pool cleaner cost?

Compare with similar items
This item Polaris Vac-Sweep 280 Pressure Side Pool Cleaner, 280 Model #1 Best Seller
Add to Cart
Customer Rating 4 out of 5 stars (2806)
Price $51986
Shipping FREE Shipping on orders over $25

What does the Polaris backup valve do?

The Polaris Back Up Valve is a mechanism attached to the cleaner’s feeder hose, which helps the Polaris cleaner maneuver the floor of your pool. If this item is malfunctioning then your cleaner may not be able to clean effectively.

Can you leave a robotic pool cleaner in the pool?

Pressure Cleaners: In-Ground Pools

Pressure side cleaners are those that attach to the pressure side (return) of your pool’s circulation system. Also called booster pump type cleaners, water that is pumped or “pushed” back to the pool propels these units, which have their own hydraulic power plant inside.

What is the best pool vacuum?

The flip side is that pressure side cleaners usually require an additional booster pump to build up the proper pressure to make the cleaner go. That’s not the case with the Polaris 360. It can operate without a booster pump, using just the water your pool circulation system is already pumping.

Should you run pool pump 24 hours day?

The first thing to look at is how long your pump is running per day. If you do not own a timer, get one. Swimming pool pumps should be run an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time.

Why does my Polaris pool cleaner float?

A Leaky Hose

Leaks in the Polaris hose cause the cleaner to lose pressure, allowing it to float above the pool bottom. To check for leaks, turn the system on and pull the hose out of the water one section at a time, looking for bubbles or trickles of water.

Why does my Polaris pool cleaner float?

But while it is true that a robotic cleaner can be used in any pool, not every robotic cleaner is suitable for every pool. Plus you have to wrestle with the cleaner and hose when you want a quick swim as most pool owners just don’t bother to remove the vacuum from the pool.

How long should a Polaris booster pump last?

I only run the boost pump 2 hours a day. I’ve had a pool for over 20 years and my last pumps lasted for eight years. There is no way this pump should fail after two and half months.

How often do you run a robotic pool cleaner?

If you‘re swimming in your pool a lot, then using the robotic pool cleaner once a day, or every other day is an ideal choice. Now, if you aren’t swimming in your pool a lot, then you should only run it once every one-to-two weeks.

Can I leave my Polaris in the pool?

In The Industry

Most have a filter bowl on the Polaris return line near the pump. No problem with leaving the Polaris in the pool when not in use.

How does Polaris pressure relief valve work?

It is designed to work as a pressure relief and should only let water out the side of the fitting when the pressure in the line exceeds the spring pressure. It’s there to prevent excess pressure from damaging the internal workings of the Polaris.

Can I use a Polaris 360 with a booster pump?

If you‘re swimming in your pool a lot, then using the robotic pool cleaner once a day, or every other day is an ideal choice. Now, if you aren’t swimming in your pool a lot, then you should only run it once every one-to-two weeks.

Why is my pool cleaner not moving?

If your pool cleaner is moving around the pool normally, but is not picking up debris, the normal solution is to clear the clog in the suction throat, or empty the debris bag or basket. Suction cleaners also need a clean pool filter to both move and vacuum well.

How do you backwash a pool?

The flip side is that pressure side cleaners usually require an additional booster pump to build up the proper pressure to make the cleaner go. That’s not the case with the Polaris 360. It can operate without a booster pump, using just the water your pool circulation system is already pumping.