A cubic metre of pure water at the temperature of maximum density (3.98 °C) and standard atmospheric pressure (101.325 kPa) has a mass of 1000 kg, or one tonne. At 0 °C, the freezing point of water, a cubic metre of water has slightly less mass, 999.972 kilograms.

Also, How many m3 are in a tonne?

1 ton (40 cubic feet) = 1.133 cubic metres. 1 cubic metre = 0.883 cubic tons (35.32 cubic feet)

Accordingly, How do you calculate the weight of water?

To find the weight of water, start by finding the density(1 kg/L at 39.2°) and the volume of water. Convert the volume of water to liters and then multiply by the density to find the weight.

How do you calculate m3?
CBM Calculation Formula

1. Length (in meter) X Width (in meter) X Height (in meter) = Cubic meter (m3)
2. We can define dimensions in Meter, Centimeter, Inch, Feet.

How do you convert kg to cm3?

To convert 1 kg to cm3 use direct conversion formula below.

1 kg = 1000000 cm3

.

Nearest numbers for 1 Kilograms.

KILOGRAMS CUBIC CENTIMETERS
1 kg = 1000000 cm3
2 kg = 2000000 cm3
3 kg = 3000000 cm3
4 kg = 4000000 cm3

## How do you calculate tonnes?

To convert a kilogram measurement to a ton measurement, multiply the weight by the conversion ratio. The weight in tons is equal to the kilograms multiplied by 0.001102. For example, here’s how to convert 500 kilograms to tons using the formula above. Kilograms and tons are both units used to measure weight.

## How many m3 are in a bulk bag?

One bulk bag will cover approximately 8 square metres (coverage is calculated assuming a depth of 50mm). Also called “dumpy bags” or “bulk bags”, the most common size can hold about 0.7 cubic metres of logs which, being less dense than sand or gravel, will weigh considerably less than a ton.

## How can I calculate weight?

Weight is a measure of the force of gravity pulling down on an object. It depends on the object’s mass and the acceleration due to gravity, which is 9.8 m/s2 on Earth. The formula for calculating weight is F = m × 9.8 m/s2, where F is the object’s weight in Newtons (N) and m is the object’s mass in kilograms.

## What is the formula for apparent weight?

Answer: Apparent weight generally refers to the weight of the object when suspended freely in water. Here, an upward force (known as buoyancy) acts up. This is the weight of the water displaced by the volume of the object. Thus, Wt = M*g.

## How do I calculate the weight of water in my pool?

The volume of water in the pool is length × width × depth. Since your dimensions are in feet this will give the volume in cubic feet. Water weighs 62.4 pounds per cubic foot so to find the weight in pounds, multiply the volume by 62.4.

## How do you calculate water per cubic meter?

Meters measure water use in cubic meter. To determine the amount of water used since your last reading, take the current meter read and subtract the previous meter read (from your water bill), which will give you the number of cubic meter/s used. For example, if your previous read was 001,200.

## How many cement bags do I need for 1m3?

Thus, the quantity of cement required for 1 cubic meter of concrete = 0.98/0.1345 = 7.29 bags of cement. The quantities of materials for 1 m3 of concrete production can be calculated as follows: The weight of cement required = 7.29 x 50 = 364.5 kg. Weight of fine aggregate (sand) = 1.5 x 364.5 = 546.75 kg.

## What is CFT formula?

Calculating cubic feet for different units (formulae)

From feet: length (ft) × width (ft) × height (ft) = cubic feet. From inches: length (in) × width (in) × height (in) ÷ 1728 = cubic feet. From yards: length (yd) × width (yd) × height (yd) × 27 = cubic feet.

## How many cm is 1 kg?

Conversion table: Cubic centimeters to Kilograms

KILOGRAMS CUBIC CENTIMETERS
1 =
1000000
2 = 2000000
3 = 3000000
4 = 4000000

## How many kg is 5 feet?

1 inch = 2.54 cm 1 pound = 453.6 g 1 foot = 12 inches = 30.48 cm 1 stone = 14 pounds = 6.35 kg

feet inches kg
5 3
51.3
5 4 51.7
5 5 52.2
5 6 52.6

## How much is 1g cm3 in kg m3?

1 g/cm3 is equal to 1000 kilogram/cubic meter. To convert 100 gram into kg then divide it by 1000 i.e. 100/1000 = 0.1 kg. To convert any value of gm/cm3 into kg/m3 then multiply it by 1000.

## What is 1000 kg called?

The metric ton used in most other countries is 1,000 kg, equivalent to 2,204.6 pounds avoirdupois.

## How many kg is a ton UK?

listen) or /tɒn/; symbol: t) is a metric unit of mass equal to 1,000 kilograms. It is also referred to as a metric ton. It is equivalent to approximately 2,204.6 pounds; 1.102 short tons (US), and 0.984 long tons (UK).

## What is the formula for work done?

Mathematically, the concept of work done W equals the force f times the distance (d), that is W = f. d and if the force is exerted at an angle θ to the displacement, then work done is calculated as W = f .

## How many 25kg bags are in a bulk bag?

One may ask, how many 25kg bags in a bulk bag?, generally a bulk or jumbo, loose tonne bag of building material such as ballast, sand or aggregate generally weight around 850kg which yields 0.5 m3, so number of 25kg bags in a bulk bag such as 850/25 = 34 bags, hence, there are 34 bags of 25kg in a bulk or jumbo or …

## How do you calculate bag capacity?

In general, bulk bags follow the basic formula for volume: volume equals length times width times height. Under this formula, a 35-inch by 35-inch by 35-inch bag can hold about 42,875 cubic inches, or 25 cubic feet, of material. Bags with larger dimensions offer increased capacity.

## How many bags of cement do I need for 1 cubic meter?

One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete. These are the 94 pound bags of portland cement or 42.64 kg bags of cement. Join in and write your own page!

## What is the force of weight?

Weight is the result of gravity . The gravitational field strength of Earth is 10 N/kg (ten newtons per kilogram). This means an object with a mass of 1 kg would be attracted towards the centre of Earth by a force of 10 N. We feel forces like this as weight.

## What is SI unit of weight?

The SI unit of mass is the kilogram (kg). … Thus, the SI unit of the quantity weight defined in this way (force) is the newton (N).

## How do you calculate weight and height?

The formula for BMI is weight in kilograms divided by height in meters squared. If height has been measured in centimeters, divide by 100 to convert this to meters. When using English measurements, pounds should be divided by inches squared.