The most common reason is heavy rainfall or otherwise excessive water in the soil around the pool. Having a high water table can cause the liner to lift from the floor of the pool like a balloon. Low pH can cause the liner to absorb water, which stretches it and leads to wrinkles.

Also, How long do pool liners last?

The average inground pool liner will last 5–9 years. The average above-ground pool liner will last 6–10 years. Liner warranties may last 25 to 30 years, but they’re extremely prorated.

In this way, How much does it cost to replace a 16×32 pool liner?

Inground Pool Liner Cost
Size Low-End Average
12×24 $400 $700
14×28 $500 $800
16×32 $650 $900
18×36 $750 $1,100

29 Related Questions Answers Found


How many gallons of water does it take to fill a 14×42 pool?

For example, if the pool is 21 1/2 feet in diameter, use 22 feet as the diameter. 3- For the Average Depth, it is best to use whole numbers, rounded up.

How Many Gallons Of Water Are In My Swimming Pool?

12′ Round 3,398
15′ Round 5,310
18′ Round 7,646
21′ Round 10,407

How do I stop my pool liner from floating?

The Traditional Way to Prevent a Floating Vinyl Liner
  1. Dig a 3′ – 4′ deep hole next to the pool.
  2. Put a 4″ – 5″ diameter piece of PVC into the hole.
  3. Fill the bottom with rock.
  4. Put a sump pump into the pit to take out all the water.

How many gallons is the summer waves 10 foot pool?

Dimensions: 10 x 10 x 2.5 feet. Water capacity (80%): 1,052 gallons.

What company makes summer waves pools?

Discover Polygroup®

The Polygroup® family of companies are committed to providing a wide range of quality, value-conscious and innovative products and services.

Can you replace a pool liner with fiberglass?

The cost of replacing a vinyl liner pool with a fiberglass pool. On average, it costs $50,000–$65,000 to replace a vinyl liner pool with a fiberglass unit. For reference: that’s $3,000–$7,000 more than installing a fiberglass pool normally.

How many gallons is a 36x18x18 tank?

Standard US Tank Capacities and Stocking Levels
Dimensions (LxWxH) Volume in US gallons/type Volume in Liters
48x13x16″ (120x33x40cm) 40 long 151
36x12x24″ (90x30x60cm) 45 170
36x18x18″ (90x45x45cm) 50 189
48x13x20″ (120x33x50cm) 55 208

What happens if pool overflows?

If you don’t have an overflow drain, or if it is clogged, it is possible for periods of unusually heavy rain to overflow your pool. Usually, overflowing pool water is a fairly minor issue, and any overflowing waters that spill onto the pool deck or into the yard will evaporate on their own.

What does a pool liner do?

What does it cost to fill a pool?

The average price to fill in an inground swimming pool is between $3,500 and $5,000. Read more about pool removal costs: The Homeowner’s Guide to Swimming Pool Demolition and Removal.

How many gallons is a 16 foot by 48 inch pool?

Includes 110-120V filter pump with pump flow rate of 1500 gallons per hour. Convenient drain plug connects to garden hose so water can be drained away from pool or house area. Also includes high-impact slip-resistant steps pool ladder, ground cloth, debris cover and handheld vacuum. Water capacity: 5061 gal.

How do I remove my pool liner?

You can remove the gasket by pulling out an end with a screwdriver and then yanking it out by hand to fully remove the liner.
  1. Drain the water from the pool using a submersible pump and hose.
  2. Locate any drain, skimmer or other pool function face plates that you need to remove.

How do I calculate gallons?

Multiply this number by the height to determine the cubic volume in inches. For example, if you have a tank that is 12 inches in diameter and 20 inches high, the calculation looks like this: Divide the cubic volume in inches by 231 in order to find the number of gallons.

How do you repair vermiculite bottom pool?

Pour one part of vermiculite powder and three parts of cement into a five-gallon bucket. Slowly add water to the mixture until you achieve a thick mud-like consistency. Gather some vermiculite onto a trowel, and place it onto the damaged section of the pool floor.

How much shock do I need for a 1000 gallon pool?

A general rule you can follow when adding chlorine is 1/2 ounce for every 500 gallons of water on a weekly basis. If you have a 1,000 gallon pool an ounce a week should be enough to effectively sanitize the water.

How big of a hole can you patch in a pool liner?

There are 231 cubic inches in a US gallon. Hence if you have a volume in cubic inches, for example 3675 cubic inches you can convert it to US gallons by dividing be 231. Hence 3675 cubic inches is 3675/231 = 15.9 gallons.

How big of a hole can you patch in a pool liner?

Swimming pool pumps should be run an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. However, often times swimming pool pump horse power is overrated for their size swimming pool.

What is a liner lock for pool?

Description. Swimming Pool Liner Bead Wedge Lock is used for beaded vinyl pool liners to hold them in the track for a more secure fit. Stays soft and pliable for years. Beaded liner lock strip replaces everything you have used in the past to try to keep your pool liner locked into place.

How much water is 1000 gallons?

The average price of water in the United States is about $1.50 for 1,000 gallons.

How do you winterize a pool?

Winter Closing
  1. Balance the water chemistry.
  2. Remove skimmer baskets, wall fittings, cleaners, solar blankets and ladders from the pool.
  3. Clean the pool.
  4. Lower the water level in the pool.
  5. Drain all pool equipment.
  6. Lubricate the o-rings on equipment.
  7. Winterize plumbing to and from the pool.

Does Flex Seal Spray work on pools?

Roofs, pools, cars, boats, basements – the list is endless. Large volume allows not to economize and to waterproof any surface. Unlike the spray Flex Seal Liquid Rubber is not toxic and can be used at any conditions. It is easy to work with, you can clean the tools after work by means of solvent.

How much bleach do I put in a 20000 gallon pool?

How do you find a small leak in your pool liner?

Ensure the pool is full (so the leak’s not above the water level). Feel the pool’s floor to see if it’s squishy, which suggests a leak in the bottom of your liner. Wherever you suspect a leak, place a few drops of food coloring. Continue placing food coloring around your pool until you find the leak.

How does a pool liner attached?

Beaded liners have a bead built into the top of the liner that serves as the attachment. The bead goes into a bead receiver. Bead receivers are first installed at the top of a pool wall during installation and then the bead (standard) snaps into this bead receiver. These liners have a bead that is shaped like a hook.

How does a pool liner attached?

Be sure it’s at least two inches larger in diameter than the hole. For example, if the rip is three inches long, the patch must be five inches in diameter.

Why is my pool liner yellow?

Mineral Buildup

Shades of yellow can be a sign of excessive iron. Iron can be introduced into a pool by well water or pipe corrosion somewhere in the pool system. Unlike algae, iron deposits resist scrubbing and take a lot of elbow grease to remove. A simple water test will confirm the presence of iron in your water.

How do I clean the water line on my vinyl pool liner?

Combine one part chlorine bleach and one part water. Use a spray bottle or a small garden sprayer to apply the bleach cleaner to the liner. Let the cleaner dry on the liner so it can remove the stains. You can clean any spots on the liner while the pool is full by applying the cleaner above the water line.

Can you shock your pool during the day?

Shock your pool late in the evening or at night, when the sun is down to make sure free chlorine will stay longer in your water. Ultraviolet (UV) rays from direct sunlight greatly reduces free chlorine levels, so shocking during the day will not be very effective.

How many gallons is a 16×32 pool?

Above Ground Swimming Pool Water Volumes by Size
12x24ft Oval 5,948 gals 6,797 gals
15x30ft Oval 9,293 gals 10,620 gals
16x32ft Oval 10,573 gals 12,084 gals
18x33ft Oval 12,267 gals 14,019 gals

Combine one part chlorine bleach and one part water. Use a spray bottle or a small garden sprayer to apply the bleach cleaner to the liner. Let the cleaner dry on the liner so it can remove the stains. You can clean any spots on the liner while the pool is full by applying the cleaner above the water line.

How many gallons per minute does a 1.5 HP pool pump?

For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).

How do I calculate the gallons in my pool?