In classical ballet this stretched tendu action is an important preparation for most of the rest of the class both at the barre and in the centre. It teaches dancers to move the feet and legs correctly, introduces the transfer of weight and helps to build strength and control.

Keeping this in consideration, What is a Tendue?

Ballet Glossary: Tendu. Tendu means “tight or stretched.” A tendu is one of the fundamental movements in ballet where the working leg is extended along the floor until only the tip of the toe remains touching the floor. It can be performed to the front, side or back and usually begins in 1st or 5th position.

Also know, What does fondu mean in ballet?

sinking down, or melting

Fondu is a classical ballet term meaning “sinking down.” It describes both the movement and the quality of a dancer where they are doing a plié on a single leg. If you think of a plié being for two legs, a fondu is the same, just for one.

26 Related Questions Answers Found


How do you do a tendu?

How to Do a Tendu:
  1. Stand in first or fifth position.
  2. Keeping both legs straight, press one foot into the floor and out, away from the other leg.
  3. As the foot moves out and the heel begins to leave the floor, point through the ankle.
  4. Press through the toes until they are fully stretched, creating a fully pointed foot.

What does passe mean in ballet?

Passé is a classical ballet term meaning “passed.” It refers to the movement when a dancer goes through a retiré position, which is when one leg is bent so it looks like a triangle with the foot placed near the other leg’s knee. In ballet class, passé is often used instead of retiré to describe the position of a leg.

What is derriere in ballet?

Derrière is a classical ballet term meaning “back” or “behind.” Its a term that describes the position or direction for another step or term. For example, a tendu derrière would describe a tendu “to the back” with the back leg from fifth position.

What is petit allegro in ballet?

allegro: Rapid tempo movements, often includes jumping steps. Petit allegro includes smaller jumping steps. Grand allegro includes large expansive jumps such as grand jeté. assemblé: To assemble or place (the feet) together in the air (usually in fifth position) during a jump.

What does attitude mean in ballet?

An attitude in classical ballet is a position where the dancer is standing on one leg with the other lifted, usually to the front (devant) or back (derrière). The leg in the air is bent at the knee so that it forms roughly a 145 degree angle.

What is a ballet jump called?

grand jeté A grand jeté is a long horizontal jump, starting from one leg and landing on the other. It is most often done forward and usually involves a split in mid-air (also called grand écart en l’air).

What does eleve mean in ballet?

An eleve‘ is a movement in which a dancer rises up high onto the balls of the feet, or all the way up to full pointe, from flat feet.

What is a Chasse in ballet?

What is a grand plie?

A plié is simply a movement where dancers bend their knees and then straighten them again. In order to perform a grand plié, the movement will consist of a full and deep bend with thighs horizontal. Grand pliés are often recommended by professional dance teachers for intermediate students and not for beginners.

What is the meaning of the name Demi?

It is originally a nickname form of Demetria, the feminine form of the masculine name Demetrius, which is itself the Latin and English spelling of Greek name Demetrios. Demi is also a prefix meaning “half”, loaned from French; for example, demi frère which means “half brother” or demi soeur which means “half sister”.

What are the basic positions in ballet?

What are the Five Basic Positions of Ballet? The positions of the feet include first position, second position, third position, fourth position and fifth position. There are also other basic ballet positions of the arms that can be combined with other beginner and advanced steps.

Is plie bad for knees?

Failure to use the full degree of turnout in plié sets your body up for injury. Knees and ankle joints can find themselves without appropriate muscular support and misaligned into angles that can wear them down, put undue strain on tendons and ligaments and cause cartilage damage.

What is an arabesque in ballet?

Arabesque (French: [a?ab?sk]; literally, “in Arabic fashion”) in dance, particularly ballet, is a body position in which a dancer stands on one leg–the supporting leg–with the other leg–the working leg–turned out and extended behind the body, with both legs held straight.

What does Jete mean in ballet?

Jeté, (French jeté: “thrown”), ballet leap in which the weight of the dancer is transferred from one foot to the other. The dancer “throws” one leg to the front, side, or back and holds the other leg in any desired position upon landing.

What are the 7 primal movements?

Rond de Jambe is a classical ballet term meaning “round of the leg” or “circular movements of the leg.” A Rond de jambe is a very common step and is seen done in various forms throughout ballet class and performances by both male and female ballet dancers.

What are the 7 primal movements?

plie` [plee-YAY] Probably the most commonly known exercise performed in ballet. A plie` is a bending of the knees, a bending action where the knees bend over the toes while the dancer’s heels remain on the floor.

What is a male ballerina called?

In French, a male ballet dancer is referred to as a danseur and a female as a danseuse. In Italian, a ballerina is a female who typically holds a principal title within a ballet company; the title for equally ranked males is ballerino. The male version of this term is danseur noble (French).

What does tendu mean in dance?

Tendu is taught as the action of stretching your leg and foot out from one position to another, while keeping it on the floor. While most teachers may simply say “Tendu…,” the complete term is battement tendu. Tendu literally translates from French as “stretched”.

What does port de bras mean in ballet?

Port de bras is a classical ballet term meaning “movement of the arms.” It describes how dancers move their arms from one position to another.

What is the hardest ballet move?

Fouette. A fouette is a “whipped throw” and is one of the most difficult turns in ballet dance. The dancer must pass their working leg in front or behind their body while spinning. This dance move is hard to master and takes a tremendous amount of determination to learn.

What muscles do plie work?

The basic positions concern the placement of the feet and are aptly named: first position, second position, third position, fourth position and fifth position.

How do you memorize ballet terms?

3 Tricks to Remembering the Top 15 Ballet Terms
  1. Alies de pigeon – a type of cabriole, means “pigeon’s wings.”
  2. Chaînes du papillon – is chaînes with butterfly arms.
  3. Pas de cheval – meaning “horse step,” resembles a horse pawing the ground.
  4. Poisson – is a position like a fish, with legs together and back arched.
  5. Saut de chat – “cat’s jump,” is a grand leap.

What is a dance turn called?

A pirouette (literally “whirl”) is a type of dance turn on one foot. It is performed with turnout (legs rotated outward at hips) in ballet, and typically without turnout in gymnastics and many other genres of dance, such as jazz and modern.

What is a dance turn called?

The Seven Primal Movements:
  • Bend to extend. Bending with a hips back movement, back straight, feet flat and forward.
  • Squat. This is a hips down motion.
  • Lunge. This is a long, linear stride, lowering your back knee to just above the ground, with a completely upright torso.
  • Rotate.
  • Push.
  • Pull.
  • Gait.

How does a ballerina spin?

When someone turns or spins around rapidly, fluid in the vestibular organs of the inner ear can be felt moving through tiny hairs. Once they stop, the fluid continues to move, which can make a person feel like they are still spinning. Ballet dancers train hard to be able to spin, or pirouette, rapidly and repeatedly.

What are the movements in ballet?

There are multiple steps referred to as the “movements in dance.” There are three movements that ballet/dance beginners learn.

Movements in Dance

  • plie (plee-ay): to bend. Keeping both feet flat on the floor at all times, bend your knees.
  • releve (ruh-leh-vay’): to rise.
  • saute (soh-tay): to jump.

How do you get a deeper plie?

Place a little more weight on the big toes than each of the four smaller toes. From this position, let your leg muscles yield a bit so that you smoothly sink into a slightly deeper plié, with your knees reaching over your toes. Repeat this sinking motion 3 times and then rise while keeping the feet stable.

How do you spell dance words?

Ballet Terms Dictionary
  1. Allégro. In ballet, allégro is a term applied to bright, fast or brisk steps and movement.
  2. Allongé In classical ballet, allongé is an adjective that describes a position that is stretched or made longer.
  3. Assemblé
  4. Avant, en.
  5. Balançoire.
  6. Ballerino.
  7. Ballet.
  8. Battement Développé

What are the 6 ballet positions?

There are multiple steps referred to as the “movements in dance.” There are three movements that ballet/dance beginners learn.

Movements in Dance

  • plie (plee-ay): to bend. Keeping both feet flat on the floor at all times, bend your knees.
  • releve (ruh-leh-vay’): to rise.
  • saute (soh-tay): to jump.

Why is ballet important?

Ballet teaches work ethic, perseverance, dedication, motivation, stamina, flexibility, and strength. Dancers work hard in ballet but the results are worth it. Ballet helps dancers grow – it gives students what they need to spread their wings and fly in all dance classes.

What is a demi plie?

The basic positions concern the placement of the feet and are aptly named: first position, second position, third position, fourth position and fifth position.