A sawzall (more accurately, a reciprocating saw) will cut rebar. The issue is to choose the right blade, and cut at the right speed. A better choice is a portable band saw or an abrasive saw with thin, metal cutting discs, but the abrasive saw will cause a lot of sparks, and requires eye protection at a very minimum.

Similarly, Can I cut rebar with an angle grinder?

If you’re patient, you can cut most metal with a hacksaw. But for quick, rough cuts, it’s hard to beat a grinder. I’ve used an angle grinder to cut rebar (Photo 3), angle iron, rusted bolts (Photo 4) and welded wire fencing. Use an inexpensive cutoff wheel for these and other metal-cutting tasks.

Also, Can Lowes cut wood for you? Most of you already know that Lowe’s offers free wood cutting. Apparently it takes up too much of employee’s time to make all these small cuts (project cutting, as they put it), so now the policy is to only cut wood to fit into cars.


31 Related Questions and Answers Found 💬

 

Will Home Depot cut pipe to size?

If you buy the pipe at Home Depot, they custom cut it (and thread it) for free. You have to buy the pipe, and there is a fairly flexible policy that they will make up to three cuts per 10 foot length, but if you catch them an hour before closing or when it is not otherwise busy, they are very accommodating.

Will Lowes cut pipe for you?

Lowe’s also offers FREE pipe threading and cutting for any size galvanized or black iron pipe. The process involves a machine-based cutting operation with a metal wheel that creates threads in the ends of pipes. This service is specifically designed to both thread and cut pipes. No blade is involved in the process.

Does Home Depot cut PVC pipes?

Anyway, regarding your question—Home Depot usually has a miter box and a couple of cheap saws over in the molding section, where customers cut their molding to rough/finish lengths prior to going to check out. These saws will easily cut PVC pipe as well.

Does Menards cut black pipe?

LDR Industries® 1″ Cut Black Steel Pipe at Menards®

Is rebar easy to cut?

Cut your rebar.

Cutting rebar can be done easily with a metal cutting hacksaw blade. You can also use a reciprocating saw, portable bandsaw, or grinder equipped with a blade suitable for cutting “mild steel”.

Can they cut metal at Home Depot?

Home Depot will not cut glass, Plexiglas, ceramic or porcelain tile, re bar, Sheetrock, fiberglass, or sheet metal. They do sell the tools for you to cut these items at home.

Does Home Depot cut wood for free?

Wood cutting

Purchasing wood from Home Depot? Don’t leave without visiting the store’s wood cutting area. Whether you’re a seasoned carpenter or working on a DIY project, a trained Home Depot associate can cut all different sizes of wood planks and boards, free of charge.

How bad is galvanized plumbing?

Single random pipe length is usually 18 – 25 feet plain end or 18 – 22 feet threaded and coupled pipes.

Can you thread black iron pipe?

Black Iron Pipe SUCCESS TIPS:

Be sure the pipe dies match the pipe size. Ream out cut black iron pipe. Use plenty of oil while cutting threads. Be sure to stop cutting once end of pipe is flush with end of die.

Can you paint black iron pipe?

Black and cast iron pipes: New black iron and cast iron pipes don’t have a passivator, but they do have an oily surface coating to inhibit rust formation. It will prevent paint from adhering and needs to come off. Sand this off, and treat the metal with a rust inhibitor prior to painting.

What does Black Iron mean?

In this context, ‘black ironis just slang referring to steel pipe with black paint on it or no paint on it as opposed to being galvanized. As the son of a plumber from before the age of plastic pipe, “black iron” was used on gas pipes (and often still is), whereas galvanized piping was used on waste piping.

How do you Rethread a pipe?

How to Rethread Plumbing Pipes
  1. Place the pipe into the saddle of a pipe vise or bench vise. Tighten the vise’s clamp to secure the pipe.
  2. Turn a pipe cutter’s adjustment knob to open the cutter’s jaw.
  3. Insert a reamer into the cut end of the pipe.
  4. Attach an NPT die to a die stock.
  5. Loosen the vise’s clamp.

Can I cut rebar with bolt cutters?

How bad is galvanized plumbing?

Galvanized pipes are steel pipes that have been coated with zinc in an attempt to prevent rust and corrosion. Unfortunately galvanized pipes corrode and rust on the inside after years of exposure to water, which is bad news for your plumbing considering how frequently water runs through it.

What does Schedule 40 mean?

The pipe schedule refers to the pipe wall thickness. The higher the schedule, the thicker is the pipe wall. For example: 2-inch nominal size steel pipe: schedule 40 has a wall thickness of 0.154 inches and schedule 80 has a wall thickness of 0.218 inches.

Will Home Depot cut pipe to size?

If you buy the pipe at Home Depot, they custom cut it (and thread it) for free. You have to buy the pipe, and there is a fairly flexible policy that they will make up to three cuts per 10 foot length, but if you catch them an hour before closing or when it is not otherwise busy, they are very accommodating.

What is the meaning of SCH 40 in a pipe?

Nominal Pipe Size. Specific pipe is identified by pipe diameter and another non-dimensional number for wall thickness referred to as the Schedule (Sched. or Sch., for example – “2-inch diameter pipe, Schedule 40“).

Does Home Depot cut PVC pipes?

Anyway, regarding your question—Home Depot usually has a miter box and a couple of cheap saws over in the molding section, where customers cut their molding to rough/finish lengths prior to going to check out. These saws will easily cut PVC pipe as well.

What is the pressure rating for Schedule 40 black pipe?

Standard Wrought Steel Pipes – STD – Schedule 40
Pipe Dimension (inches) Standard – STD – Sch. 40
Bursting Pressure (psi) Working Pressure (psi)
1/2 10380 1300
3/4 8610 1080
1 8090 1010

How bad is galvanized plumbing?

ABS: This black pipe was the first plastic pipe to be used in residential plumbing. Today, many areas don’t allow ABS in new construction because joints can come loose. Do-it-yourselfers can handle ABS or PVC pipes, but call a professional for cast iron.

Can a Dremel cut cast iron?

A hybrid joint would be another possible method of joining plywood panels together. For this method, edge glue the plywood together, create a shallow bevel along the joint on both sides of the plywood and then reinforce the joint with a layer or two of fiberglass on each side of the joint.

Will Home Depot bend pipe?

You can purchase a pipe (conduit) bender from Home Depot or the like. Electricians use this tool for bending the pipe without crimping it (go to www. homedepot.com and search for pipe bender and see sku # 784795 for $14.98).

Does Menards cut black pipe?

LDR Industries® 1″ Cut Black Steel Pipe at Menards®

Does Menards cut black pipe?

Galvanized pipes are steel pipes that have been coated with zinc in an attempt to prevent rust and corrosion. Unfortunately galvanized pipes corrode and rust on the inside after years of exposure to water, which is bad news for your plumbing considering how frequently water runs through it.

Is Home Depot or Lowes cheaper?

Like many retail environments, you will find Home Depot is cheaper on some things, Lowe’s will be cheaper on some others. Grocery stores are exactly the same.

How can I cut wood without tools?

Using a sharp Axe
  1. First of all create an imaginary line along the wood.
  2. Start cutting small bits of the wood few inches from the line.
  3. Keep on doing this continuously.
  4. When finished with one side.
  5. Keep on cutting until the wood log breaks into two.
  6. After breaking use a sharp axe to trim the edges.

Why is it called Schedule 40 pipe?

They devised “Schedule” numbers as designating “the wall thickness in that pipe diameter that would hold a given pressure for a given material tensile strength”. So the pipe thickness which would hold 600psi at 15 ksi material strength was designated as schedule 600/15= 40.

What is pipe schedule and wall thickness?

Standard Pipe Schedules Pipe Sizes Chart Table Data
Nom. O.D. Inches PIPE SCHEDULES WALL THICKNESS ( Inches)
1/2 .840 .065
3/4 1.050 .065
1 1.315 .065
1 1/4 1.660 .065

How do you join two pieces of plywood?

Using a sharp Axe
  1. First of all create an imaginary line along the wood.
  2. Start cutting small bits of the wood few inches from the line.
  3. Keep on doing this continuously.
  4. When finished with one side.
  5. Keep on cutting until the wood log breaks into two.
  6. After breaking use a sharp axe to trim the edges.

How do you cut an old cast iron pipe?

To cut cast iron pipe, start by marking the line you want to cut on the pipe with chalk. Then, wrap the chain of a snap cutter around the pipe so it’s over the line. Once the chain is in place, apply pressure to the handle of the snap cutter to cut through the pipe.

How strong is black iron pipe?

A hybrid joint would be another possible method of joining plywood panels together. For this method, edge glue the plywood together, create a shallow bevel along the joint on both sides of the plywood and then reinforce the joint with a layer or two of fiberglass on each side of the joint.