News flash: the **fire** department **will** not send a truck to your house to **fill** up your swimming **pool**. Water from **fire** trucks is not potable or suitable for swimming.

Also, How much does it cost to fill a 10000 gallon pool?

If you don’t trust your well, it will **cost** about $200 to **fill a 10,000 gallon pool** using a good water company that will deliver drinking water. Be careful, some water delivery people will back up to a local pond to **fill** up.

In this way, Will two hoses fill a pool faster? The **second hose** since it **fills** the entire **pool** in **two** hours, **can** be said to **fill** the **pool** at a rate of 50 parts per hour. So when **both hoses** are on, they **fill** the **pool** at a rate of 150 parts per hour. Meaning it should take **2**/3 of an hour to **fill** the **pool** with **both hoses** on.

**29 Related Questions Answers Found**

Table of Contents

**How much shock do I need for a 10000 gallon pool?**

One pound of **shock** treats up to **10,000 gallons** of **pool** water. Also, keep the **pool** filter and pump running for at least 10 hours during and after you **shock**.

**Can you fill a pool overnight?**

Hi, with 12″ of water in the **pool you** should be fine to let it **fill** all **night**. The stretching should be done and the liner tight against the wall. **If** so, let it go. There is some air gap between the liner and the wall in a few areas.

**How much water is 1000 gallons?**

The average **price** of **water** in the United States is about $1.50 for **1,000 gallons**.

**Can you shock your pool during the day?**

**Shock your pool** late in the evening or **at** night, when the sun is down to make sure free chlorine will stay longer in **your** water. Ultraviolet (UV) rays from direct sunlight greatly reduces free chlorine levels, so **shocking during the day** will not be very effective.

**What does it cost to fill a pool?**

The average price to **fill** in an inground swimming **pool** is between $3,500 and $5,000. Read more about **pool** removal costs: The Homeowner’s Guide to Swimming **Pool** Demolition and Removal.

**How many gallons of water is in a 27 foot round pool?**

**pool**is 21 1/2

**feet**in diameter, use 22

**feet**as the diameter. 3- For the Average Depth, it is best to use whole numbers, rounded up.

**How Many Gallons** Of **Water** Are In My Swimming **Pool**?

SIZE | GALLONS OF WATER |
---|---|

18′ Round | 7,646 |

21′ Round | 10,407 |

24′ Round | 13,593 |

27′ Round | 17,204 |

**How can I fill my pool fast?**

**Fill** your **pool** until the water reaches about the middle of a surface skimmer, covering the **pool** water filter inlet slightly. This may take from a few hours to a couple of days, depending on if you are using a garden hose or having your water delivered.

**What is the capacity of my pool?**

**How many gallons is a 36x18x18 tank?**

Dimensions (LxWxH) | Volume in US gallons/type | Volume in Liters |
---|---|---|

48x13x16″ (120x33x40cm) | 40 long | 151 |

36x12x24″ (90x30x60cm) | 45 | 170 |

36x18x18″ (90x45x45cm) | 50 | 189 |

48x13x20″ (120x33x50cm) | 55 | 208 |

**How much bleach do I use to shock my pool?**

Calculate the amount of **bleach** you need based on the fact that 1 gallon will raise the free chlorine level of 30,000 gallons of water by 2 ppm. If you need to mildly **shock** a 30,000-gallon **pool** by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of **bleach**. To raise it to 10 ppm, you need 5 gallons.

**Can I fill my pool with my well?**

However, it takes an average of 12-24 hours to **fill** even a small **pool**. In addition, you should not **fill** your **pool** with a hose if you are using **well** water. Doing so imposes a risk of damaging your **well** pump and/or running your **well** dry.

**How long should I run my pool pump?**

Swimming **pool pumps should** be **run** an average 8 hours a day to properly circulate and clean your water. The **pump should** push your entire **pool** in gallons in this 8 hour period of time. However, **often** times swimming **pool pump** horse power is overrated for their size swimming **pool**.

**How many gallons is a 16×48 pool?**

**pool**is 21 1/2 feet in diameter, use 22 feet as the diameter. 3- For the Average Depth, it is best to use whole numbers, rounded up.

**How Many Gallons** Of Water Are In My Swimming **Pool**?

SIZE | GALLONS OF WATER |
---|---|

12′ Round | 3,398 |

15′ Round | 5,310 |

18′ Round | 7,646 |

21′ Round | 10,407 |

**How do I calculate gallons?**

Multiply this number by the height to **determine** the cubic volume in inches. For example, if you have a tank that is 12 inches in diameter and 20 inches high, the **calculation** looks like this: Divide the cubic volume in inches by 231 in order to **find** the number of **gallons**.

**How do I add water to my pool?**

The average price to **fill** in an inground swimming **pool** is between $3,500 and $5,000. Read more about **pool** removal costs: The Homeowner’s Guide to Swimming **Pool** Demolition and Removal.

**How do I add water to my pool?**

Olympic size **pools** measure: **50** metres **long**, **25** metres **wide**, and a minimum of **2** metres **deep**. 660,430 gallons of **water**.

**How deep is a 16×48 pool?**

**Depth** : 48 (in.)

**How do you winterize a pool?**

**Winter Closing**

- Balance the water chemistry.
- Remove skimmer baskets, wall fittings, cleaners, solar blankets and ladders from the pool.
- Clean the pool.
- Lower the water level in the pool.
- Drain all pool equipment.
- Lubricate the o-rings on equipment.
- Winterize plumbing to and from the pool.

**How many gallons is a 16×32 pool?**

Above Ground Swimming Pool Water Volumes by Size | ||
---|---|---|

12x24ft Oval | 5,948 gals | 6,797 gals |

15x30ft Oval | 9,293 gals | 10,620 gals |

16x32ft Oval | 10,573 gals | 12,084 gals |

18x33ft Oval | 12,267 gals | 14,019 gals |

**How long does it take to fill a 15000 gallon pool?**

**How many gallons are in a Walmart pool?**

This unit will hold 10,472 gal at 90 percent capacity. All you have to do to get it running is gather a friend or two, follow the instructional DVD for easy set up and enjoy the fun. Intex 22′ x 52″ Ultra Frame Above Ground **Swimming Pool** with Filter Pump: Requires 2-3 adults for assembly.

**How long does it take to fill an Olympic swimming pool?**

Assuming that the **pool** has a perfectly flat floor, it **would take** 1.18M minutes, or 819 days. Bearing in mind, that **would** be the tap being on full blast and that recommended brushing time is 2 minutes. It **would take** 300 people brushing their teeth with the water fully on, a year to **fill an Olympic pool**.

**How long would it take to fill the ocean with a hose?**

According to a random website, the **oceans** combined are 352,670,000,000,000,000,000 gallons. Go outside and **fill** a gallon milk jug, and time it to see how **long** it **takes** you (all houses will be different based on water pressure). Multiply that by 352,670,000,000,000,000,000 and there’s your answer! About 6 or 7.

**How long would it take to fill the ocean with a hose?**

**How to Add Water to a Pool**

- Step 1 Clean the Pool. Clean your pool by skimming the surface for debris, leaves, twigs and bugs.
- Step 2 Evaluate the pH. Check the pH of your pool before adding more water.
- Step 3 Add Water. Use your hose to add water to your swimming pool.
- Step 4 Test for pH.
- Step 5 Adjust the Chlorine.

**How much does it cost to fill an above ground pool?**

The **average cost** of a typical 24′ round **pool** (containing 14,700 gallons) with your water hose is going to **cost** you about $80-$160. These **costs** are depending where in the country you live and your local water supply markets. You can get exact numbers by calling your local township and they will let you know your rates.

**How do you fill a swimming pool with water in Minecraft?**

**water**to the top layer.

Use your bucket and start **filling** in the top layer with **water**. **Water** will flow from the source blocks you place, so you won’t need to **fill** in each block. As you **fill**, you might notice some currents appearing.

**How do I calculate volume of water in a tank?**

Multiply its width by its height by its depth. The result is the cubic feet of space the **tank** holds. Multiply the result by 7.48. The answer is the number of gallons of **water** the **tank** holds.

**How do you calculate gallons in a round pool?**

**Round Pool Volume**

- 3.14 Ã— r
^{2}Ã— D Ã— 7.5 = V (in gallons) But before you can solve that equation, you need to find the radius of the pool. - 24 Ã· 2 = 12. To get the radius squared, you’ll multiply the radius by itself:
- 12 Ã— 12 = 144.
- 3.14 Ã— r
^{2}Ã— D Ã— 7.5 = V (in gallons) - 3.14 Ã— 144 Ã— 4 Ã— 7.5 = 13,564.8 gallons.

**How many gallons is a 22ft by 52in pool?**

**water**to the top layer.

Use your bucket and start **filling** in the top layer with **water**. **Water** will flow from the source blocks you place, so you won’t need to **fill** in each block. As you **fill**, you might notice some currents appearing.

**How do you size a pool filter?**

To come up with this flow rate first divide your calculated gallons by 8 for Gallons Per Hour (GPH). Then divide that number by 60 to get Gallons Per Minute (GPM). For our example of 20,000 gallons that’s: 20,000 / 8 hours or 2,500 GPH divided by 60 mins/hour or 42 GPM.

**How do you close an above ground pool?**

This unit will hold 10,472 gal at 90 percent capacity. All you have to do to get it running is gather a friend or two, follow the instructional DVD for easy set up and enjoy the fun. Intex 22′ x 52″ Ultra Frame Above Ground **Swimming Pool** with Filter Pump: Requires 2-3 adults for assembly.